Price Clear







Gundam Model Kits

Showing 151 - 180 of 1069 products

img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
img
SAVERM23.90

[001] HG 1/144 GN-001 Gundam Exia

  • High grade GN-001 Gundam Exia
  • Comes with installation manuals
  • Scale: 1/144
  • snap and fit that does not require any glue.
  • Detail wikipedia of GN-001 Gundam Exia can be found here.

RM48.00
img
SAVERM33.90

[117] HGUC 1/144 Gouf Custom

- Gouf masterpiece series [Gouf] appeared in the HGUC series!

- The biggest feature is the extensive armament Gouf 1 / 144 scale is also included!

- Hitoroddo ... Hitoroddo reproduce the lead, after the tip deployment comes before deployment.
Three twin 35mm Gatling gun · 75mm Gatling gun

- Hitosaberu

- Shield reproduce complex split!
* The shield can be removable from the twin 3 35mm Gatling gun.

- Hitosaberu is removable to allow Gatoringushirudo.
· 75mm Gatling gun and shield sets reproduce the splitting of the street.

- Comes with plenty hand parts
In addition to the grip of a fist, fist expressive (left) and palm (right) is included.

- Pipe materials used soft power of the waist belt fed ammunition is both easy to assemble and reproduce complex shapes using a soft material.
After mono eye - can be assembled by moving parts division.

- Accessories: Hitoroddo, Hitosaberu, shielded, 75mm Gatling gun,
3 35mm twin Gatling gun, for the fist grip (left), fist (right), palm (right)

RM62.00
img
SAVERM25.90

[056] HGUC 1/144 RX-121-1 Hazel-Custom Gundam

Used the Advance of Zeta photonovels, the Hazel is equiped with a number of experimental test equipment. Includes beam rifle, shield booster, normal shield, beam saber and shoulder mounted grenade launchers.

RM52.00
img
SAVERM28.90

[065] HG 1/144 Gundam Astraea

- Official Gaiden MS, commercialization decisions Gandamuasutorea! - Official Gaiden Asutorea 00P appeared to reproduce the HG series. - Asutorea] come with basic equipment. - The backpack is also possible to assemble the cone-shaped selection formula. - Accessories: Proto GN Sword, GN Launcher, GN beam rifle, GN beam saber x— 2, Shield

RM60.00
img
SAVERM39.90

[063] HG 1/144 1.5 Gundam

  • Here is the evolved MS of the official sub story MS, 1Gundam, taking off! - Scheduled for appearance in the official sub-story 00I. The evolution of 1Gundam, equipped with a new armory binder on the back, has been reproduced as the I's Gundam in HG. 
  • You can choose to build it as 1Gundam itself. 
  • The new weapon binder has been equipped with a gimmick to reproduce each weapon modes such as the Cannon mode.
  • Includes the new weapon common to 1Gundam and 1.5Gundam, the large GN Sword and GN Beam Saber. 
  • Large GN Rifle is included too, for a very rich weaponry content. 
  • Accessories: GN Shield, Large GN Beam Rifle, GN Beam Saber x2 (Blade x1), Back Binder

RM68.00
img
SAVERM27.90

[098] HGUC 1/144 Full Armor 7th Gundam

  • The FA-78-3 Full Armor 7th Gundam first appeared as a part of Kunio Okawara's Missing Mobile Suit Variations (M-MSV). The Gundam was later redesigned and updated and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081.
  • Product Weight : 297g

RM62.00
img
SAVERM32.60

HGUC 1/144 Ewac-Zack

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

RM63.30
img
SAVERM29.90
RM60.00
img
SAVERM33.30

[079] HGUC 1/144 RX-79(G) Gundam Ground Type

wikipedia:While Project V was underway, the Federation also began production of experimental units using spare parts originally intended for the RX-78 Gundam. Using these parts they built approximately twenty specialized ground combat-model christened the RX-79[G] Gundam Ground Type during the mid-part UC0079. Though in many ways similar to its RX-78-2 predecessor, the RX-79[G] was quite a bit different in other ways, particularly in its armament. The beam sabers were stored in the legs, as the backpack mounted an equipment rack to carry storage containers, parachute packs, or other field options. The head vulcan guns were removed, as the head now carried a periscope for underwater and trench warfare. Although sporting a smaller generator than the RX-78, the Ground Type Gundam still had the generator power to use a beam rifle, though it was often equipped with a standard 100mm machinegun or a heavy 180mm cannon. A single vulcan gun and a multiple-use "multi-launcher" mounted in the torso's left breast rounded out the new armament. In order to make use of space, two extra ammunition packs for the machinegun were placed on the sideskirt armor. As the RX-79[G] was built out of spare parts from Project V, replacements parts were very limited. Luckily the RGM-79[G] shared 80% of the same parts as the Gundam, making field repairs easier but sometimes resulted in a few customized mobile suits. Source:http://gundam.wikia.com

RM56.60
img
SAVERM26.60

[025] HG 1/144 GNX-704T Ahead Mass Production Type

accessories: GN Rifle x 1, GN Shield x 1, Beam Saber x 2

RM45.30
img
SAVERM29.90

[107] HGUC 1/144 Zaku II F2 (E.F.S.F. Ver.)

From Gundam 0083 'Stardust Memory' comes our newest HGUC, the Zaku II F2, as used by the E.F.S.F. Bandai's design once again involves the use of plenty of poly-caps allowing this Zaku II a great deal of articulation. Included with this Zaku are the 120MM Zaku Machinegun, 90 mm Machinegun, Heat Hawk, and the Missile pods which attach to the legs. Marking stickers are also provided.

RM60.00
img
SAVERM21.90

[113] HGUC 1/144 RGM-79C GM Type C

GM variant seen in Gundam 0083 Stardust Memory, features machine gun, shield, bazooka and beam saber as well as Federation faction markings and a number of different hands for various poses.

Accessories: 
- Bazooka
- Beam Gun
- Shield
- Sabre (grip only)

RM50.00
img
SAVERM17.20

[035] HG 1/144 GNR-010 0 Raiser

Machine - HG Gundam response support.
Exhibition - it can be in the form of flight support Gundam.
- To unite with Raiser Gundam.
- GN Sword II connector is attached.
- GN shield included.
- Adjunct: GN shield connection parts x 2, GN Sword II, dedicated base

RM30.70
img
SAVERM31.94

[072] HG 1/144 Brave Standard Test Type

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestal

RM64.00
img
SAVERM31.94

[071] HG 1/144 Brave Commander Test Type

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestalHistories:The GNX-Y903VS Brave (Commander Test Type) is featured in Mobile Suit Gundam 00 The Movie: A Wakening of the Trailblazer, where it is developed and deployed by the Earth Sphere Federation Army. The GNX-903VS Brave (Commander Test Type) is a customized version of the GNX-903VS Brave (Standard Test Type), and was assigned to Captain Graham Aker, who leads the Sol Brave Squadron, an elite mobile suit squadron composed exclusively of Brave units. The Braves were first seen when Graham deploys the Sol Brave Squadron to assist Celestial Being during their second attempt to communicate with the Extraterrestial Living-metal Shape-shifter. Graham and his squadron covered the Celestial Being retreat, and while both parties were able to retreat, the effort was not without casualties - some of Graham's Braves were assimilated, while Celestial Being lost the GN-0000RE+GNR-010 00 Raiser (Condenser Type), the GN-008RE Seravee Gundam II, the CB-002 Raphael Gundam, and the physical body of Tieria Erde. Later, Graham and his remaining men sortied to hold back the ELS invasion alongside the rest of the ESF Army and Celestial Being. During the battle, Graham defended Gundam Meister Setsuna F. Seiei and the GNT-0000 00 Qan[T] from the ELS attack. While he fought valiantly, Graham's Brave was eventually struck by several ELS, and was already being partially assimilated. With nothing left to lose, Graham decided to believe in Setsuna's vision for a brighter future, and sacrificed his life for the sake of that vision, activating Trans-Am and smashing into the ELS mothership to clear a path for the 00 Qan[T] to enter the massive superstructure. It is currently unknown how many Braves remained after the final battle, or if they were ever put into full mass-production.Source:http://gundam.wikia.com

RM64.00
img
SAVERM23.90

[003] HG 1/144 Gundam Dynames

Here's an excellent snap-fit assembly kit of Lockon Stratos' personal Mobile Suit, Gundam Dynames! Molded in color, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode.

Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor.

The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

RM48.00
img
SAVERM35.90

[051] HG 1/144 GN-009GNHW/B Seravee Gundam GNHW/B

GN-009GNHW/B Seravee Gundam GNHW/B

Arnaments in movies series
i. GN Bazookas
The new GN Bazookas are an overall improvement over Virtue's bazooka. While it can fire the weapon traditionally as a single piece weapon, GN Bazooka IIs has multi-function capabilities and enhancements over its predecessor. The 2 separate bazookas can be combined into a single form that is reminiscent of Virtue's. This design was intentional, due to past experiences with high speed combat enemy units. Virtue's Bazooka might have been powerful, but its beam fire was so slow that it was easy for enemy units to avoid getting shot. The GN Bazooka II can fire faster and can be used in conjunction with GN Cannons for extended range and firepower. When greater firepower is needed, the split bazooka can be attached onto the shoulder GN Cannons to enhance it's firing solution in range and power. As a single piece weapon, the Double Bazooka, it can fire a particle beam sphere.

ii. GN Cannons
Four GN Cannons are attached in between the rear shoulders and knees of Seravee. They are improved versions of Virtue's cannons as they are smaller, lighter, and have greater firing succession rates. The top cannons can work in conjunction with GN Bazooka II for extended range and firepower. In addition, the GN Cannons also works in conjunction with Seravee's GN Field. When all four cannons are deployed, a GN Field is generated at the center. When the cannons fire, the central GN particles and the cannon become a single blast that's comparable to Virtue's GN Bazooka Burst Mode. A hidden ability of the GN Cannons are that they double as transformable MS arms, with their own GN Beam Sabers for melee combat. This feature was added in consideration for Seravee's lack of speed, poor maneuverability, and other deficiencies as a countermeasure(s).

iii. GN Beam Sabers
Seravee has a total of 6 beam sabers, 2 in its MS forearms and 4 hidden within its cannons/MS arms. The additional beam sabers are hidden and only used in dire situations (such as facing close-combat mobile suits).

RM72.00
img
SAVERM27.90

[118] HG 1/144 Gundam X Divider

- Gundam X Gundam X Divider extended aircraft appeared in HG series. 

- HG in obscure parts then split by a joint, detailed color reproduction. 
- Transform into gun gimmick with the harmonica from the shield. 
- To reproduce the deformation of the shield gun replacing some harmonica mode. 
- Backpack thrusters of the deployment motion reproduction. 
- MS bring out the charm of additional accessory parts. 

Bimumashingan, Haipabazuka, Hirate add new. 
- Gundam X Divider and the ... Mobile New Century Gundam [X] that appears in aircraft. 
-The satellite system was destroyed in the battle with Fort Severn Berutigo 
-Gundam X, the aircraft was restored using a variety of junk parts.

RM80.00
img
SAVERM39.90

[004] HG 1/144 GPB-04B Beargguy

The next kit in the Gunpla Builders line is Rina Noyama's adorable Beargguy. This little fella comes molded in color and snap fits together so you don't need glue or paint. Extra parts to make an extendable arm are included as well as marking stickers for the eyes. Just updated with review :)

RM68.00
img
SAVERM23.60

[003] HG 1/144 Aegis Gundam

1/144 scale HG kit of the Aegis Gundam from the new hit Gundam series 'Gundam Seed'. And yes, it's pink! Actually, it's a sort of a coral color, for the most part. Polycaps are included to allow it to transform to mobile armor mode with four claw arms which can close tightly for flight. A spiffy little kit for the price!

RM48.30
img
SAVERM35.40

[036] HG 1/144 Destiny Gundam

High Grade injection plastic model of the Destiny Gundam is molded all in colour and snaps together so you don't need to paint or glue it! Clear parts for its beam shield and those big pink wings are included. Foil stickers are included for added detail; and polycaps work the joints. Parts for a custom display stand are included.

RM60.50
img
SAVERM47.90

[040] HG 1/144 Oowashi Akatsuki Gundam

Oowashi Akatsuki Gundam (HG) 1/144

RM96.00
img
SAVERM35.90

[034] HG 1/144 Strike Freedom Gundam

  • Very sharp high-grade Strike Freedom Gundam comes molded in all the right colours and features snap-fit assembly. Clear parts for the Beam Shield and Super Dragoon are included. Foil stickers add detail to the finished model.

RM60.00
img
SAVERM22.90

[001] HG 1/144 Strike Rouge+ I.W.S.P

HG Strike Rouge IWSP, scaled 1/144

RM60.00
img
SAVERM35.40

[032] HG 1/144 Infinite Justice

What could possibly be better than Infinite Justice? Isn't that the way the giant robot world works anyway? Here's the Infinite Justice Gundam to prove just that, powered up with a tonne of weaponry, full action with polycaps at the joints, the "Phantom-01", and a display stand to show it all off. All parts are molded in colour and snap together, so you don't need to paint or glue it; stickers are included for added detail.

History of Infinite Justice
The ZGMF-X19A Infinite Justice Gundam is an advanced mobile suit secretly built by ZAFT's rogue Clyne Faction, based on the earlier ZGMF-X09A Justice. It utilizes a new engine design and advanced weaponry that gives it several times the combat ability of the original Justice.

The Second Battle of Orb
The ∞ Justice makes its debut in Cosmic Era 74, arriving on Earth together with the ZGMF-X20A Strike Freedom during the ZAFT invasion of Orb. It is delivered to Athrun Zala personally by Lacus Clyne, who pilots the ∞ Justice through atmospheric re-entry and lands in the Archangel's mobile suit hangar to give it to Athrun. After talking with Lacus, Athrun takes off in the infinite Justice to back-up Kira in the Strike Freedom, who was battling both the ZGMF-X42S Destiny and the ZGMF-X666S Legend and manages to chop off Destiny's wrist despite Athrun being injured before the fight.

The Final Battle of Second Bloody Valentine War
The Justice also plays a highly prominent role in the end of the Second Bloody Valentine War. First, Athrun disables both Shinn Asuka's Destiny and Lunamaria Hawke's ZGMF-X56S Impulse. Then, Athrun cripples the Minerva by utilizing the multiple beam cutters on the Justice's Fatum-01 backpack to destroy the Minerva's spaceflight engines. Lastly, Athrun used the ∞ Justice's backpack, along with help from Mu La Flaga's ORB-01 Akatsuki's DRAGOONs, to destroy Requiem. When the battle is brought to an end, the ∞ Justice rescues both Shinn and Lunamaria.

Source:wikipedia

RM60.50
img
SAVERM44.60

[006] HG 1/144 Beginning 30 Gundam

- Bigining gandam evolve! The final form of additional weapons packed a big success! - To add new parts and more heroic style! - Evolution of the beam rifle? - Plenty of power by armed! - Effects jet beam (clear plastic) can be produced just like in the movie! - Accessories: Break beam rifle, shield, beam shield, beam saber, Of three beam saber in one hand, the effect × 8 beam

RM87.30
img
SAVERM45.20

[005] HG 1/144 GPB-X78 Forever Gundam

  • Manipulate the strongest Gundam Foebagandamu Ganpuramaisuta Schauer, 
  • He appeared ahead! 
  • Inviting Mr. Ookawara Kunio mechanical design, reproduction new Furuamaforumu nostalgic! 
  • HG RX78-2 G30th equipped Gundam Full Armor! 
  • Add G30th exterior parts. Some removable armor. 
  • Canon's flexible movable rear. Tip is removable. 
  • Fully armed G30th similar. 
  • Can be a variety of poses while Furuamaforumu! 
  • Accessories: beam rifle, beam saber, shield, hammer Gundam 
  • Hyper bazooka, funnel × 4

RM74.70
img
SAVERM27.90

[119] HG 1/144 Nobell Gundam

- The second volume of HGFC(Future Century) is Nobell Gundam! 

- You can create performance with the ribbon formed with the PET materials. 5 ribbons using sheets of PET plastic are included. 

You will be able to create movement effect if used in conjunction with the included display base. 

- The use of new mechanism allows the reproduction of feminine form poses! 
A Swing Mechanism has been equipped to the hip, enabling it to take feminine standing pose. 
Also, the wrist has been made smaller, along with the inclusion of a V-sign hand part. The hair part moves by the ball, so not to prevent the movement of the head part. 

- Recreate THAT scene that left strong impression, with the extra parts for HGFC God Gundam! To allow HGFC God Gundam to carry her in its arms, open hand parts have been included. 

- Accessories: Saber holding hand (left/right), Open hand (left/right), V-sign hand (left), Saber grip part x2, BA1 Display Base + Ribbon x5

RM62.00
img
SAVERM25.90

[120] HGUC 1/144 RGM-79N GM CUSTOM

  • Runner x7, Marking sticker x1, Instruction manual 
  • The third 0083 series GM following Powered GM and GM Type C comes out. 
  • The joints have wide range of movement 
  • The newly designed outer parts make its slender figure possible. 
  • 6 kinds of wrists parts are included.

RM52.00
High Grade (HG) are the most commonly built kits on this list. They are easy to build, their price point is affordable, and there is a wide variety of HG kits to choose from. These kits can easily be spotted by the HG moniker found on the corner of the front box art. These kits have more articulation than SD units, which gives it more options for poses. They are 1/144 scale make them the perfect size for collecting and displaying.

In our previous blog, we mentioned that HG kits is our recommended grade for beginners. This is because they offer a great experience without having to break the bank. As you progress and become a better builder, HG kits become fantastic test subject to practice weathering and painting techniques.

Showing 151 - 180 of 1069 products