• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

• Total of 520pcs parts to create a robot . Can switch and transofrm between the massive G-Fortress flyer, the core base, core top and core fighter individual units, plus of course the actual ZZ Gundam itself. 
  
• Inner detail is not as good as some other MG releases, but given the nature of the ZZ, that's not surprising. 
  
• Fully posable hands are just part of the completely posable structure that lets you duplicate virtually any scene you can think of. 
  
• Weapon includeds two beam sabers, and a huge double cannon.
  

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

• I'm going to skip obvious puns like "Bandai Strikes Gold!" and just get to the good stuff: 
  
• The Hyaku-Shiki gets the MG treatment! The results are incredible. 
  
• Bandai has engineered this piece so that the beautifully gold plated pieces have very fine sprue attachment points to make assembly easy. 
  
• Just use care in removing the numerous perfectly plated gold pieces from the tree. 
  
• As usual with a Bandai MG series everything moves via poly-cap joints. 
  
• Leg and arm armor can be removed. A beautiful kit and a real attention-getter on display.

• A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  
• No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  
• Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g
  

Weight: 1000g

• Leg joints feature adjustable extension, allowing the kit to take dramatic action poses from the series. 
  
• Chest unit and leg units are built around a movable frame, just like in the series. Includes a beam rifle with exchangeable magazine, Hyper Bazooka, retractable shield, two beam sabers, and Vulcan pod. 
  
• Weight:1000g 
  

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

RX-178 Gundam Mk-II (MG) A.E.U.G. Color

RX-178 Gundam Mk-II Titans

HGUC MSZ-006 Zeta Gundam 1/144

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

• MG FA-010S Full Armor ZZ Gundam
  

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam
  

BB Hyaku Shiki & Mega Bazooka Launcher

Along with the Hyaku-Shiki (Type 100), the Rick Dias is one of the most popular mecha from Zeta Gundam as it was designed by Mamoru Nagano of L-Gaim and Five Star Stories fame. This new kit does it justice, featuring overall slimmer, sharper proportions than the chunky High Complete Model or 1/100 kit of many years ago. As usual for kits in the High Grade series, it's molded in color, features snap assembly, and has poly-caps for all the moving joints.Reviews by Gundam.tk: Personal review: Limited mobility on the feet as the armor pieces on the leg constrained the movement of the lower body part, you have a clearly loose part on the head of the rick Dias (once is completed), and you got to be careful on 'some' of the part.

• Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  
• Features huge rear skirt and knee armor, as well as upgraded thrusters.
  
• Can convert from Quattro Custom to standard Rick Dias! 
  

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• The second release in the new RE/100 category, Gundam Mk-III from "Mobile Suit Z Gundam MSV" has arrived. 
• With sharp modeling comparable to MG (Master Grade), the appearance of every part of the mobile suit is highly detailed, and elicits the full allure of it. 
• Although utilizing a frameless structure, this kit combines movability with detailed modeling by a sophisticated parts structure. The time required to build the Gunpla is drastically reduced. 
• The utilization of a new poly-cap design consolidates three kinds of movability, and that results in a simple but dynamic maneuverability. 
• The Beam Cannon on the Backpack can swing back and forth. 
• Along with a beam rifle, beam sabers the Energy-Capacitor and shields, flat hands and hands for gripping a weapon are included. 
• Runner x9, Foil sticker x1, Tetron sticker x1, Instruction manual x1