Price Clear







Showing Gundam Model Kits product(s)

Showing 1 - 30 of 108 products

img
SAVERM647.40

PG 1/60 Gundam 00 Raiser

- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

RM910.00
RM910.00 Add to cart
img
SAVERM240.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM420.00
RM420.00 Add to cart
img
SAVERM400.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM700.00
RM700.00 Add to cart
img
SAVERM97.10

MG 1/100 XM-X1 Crossbone Gundam X-1 Ver.Ka

  • Product: XM-X1 Cross Bone Gunda, X-1 Ver.Ka
  •  Mobile Suit Crossbone Gundam is a manga set in the Gundam Universal Century. It was written & illustrated by Yuichi Hasegawa. It takes place in UC 0133, ten years after the events of Mobile Suit Gundam F91. It is a direct sequel to the movie as well.
  • In the face mask is equipped with a mechanism that slides upward from the normal form.
  • Comes with a variety of weapon equipped.

RM136.50
RM136.50 Add to cart
img
SAVERM64.70

MG 1/100 RB-79 Ball Ver.Ka

  • RB-79 Ball Ver.Ka

RM91.00
img
SAVERM89.60

MG 1/100 RX-78-2 Gundam Ver.Ka

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

RM126.00
RM126.00 Add to cart
img
SAVERM199.90

MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka

  • Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
  • Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
  • Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
  • Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
  • Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
  • Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
  • Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.
Families of Unicorn series in glance:
  • BB-360 Unicorn Gundam
  • BB-360 Unicorn (Expo Version)
  • RX-0 Unicorn Gundam 02 Banshee (MG)
  • ?
  • Unicorn Gundam 02 Banshee (Unicorn Mode)
  • [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
  • RX-0 Unicorn Gundam HD Collar +MS CAGE
  • RX-0 Unicorn Gundam Destroy Mode
  • Unicorn Gundam Destroy Mode Titanium Finish
  • RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
  • RX-0 Unicorn Gundam (MG)
  • RX-0 Unicorn Gundam Ver.Ka

RM280.00
RM280.00 Add to cart
img
SAVERM184.30

MG 1/100 RX-93 Nu Gundam Ver.Ka

  • Accessories: beam rifle, shield, beam saber, beam saber (small), Fin funnel x 6 
  • Item Size : 39 x 31 x 12 cm / 1163g


According to wikipedia

The RX-93 ? Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was piloted by Amuro Ray.

The ? Gundam was one of the most advanced mobile suits of its time in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, designed and used by Amuro Ray himself during the Second Neo Zeon War. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average value of specifications of each successive generations of Gundam-type units from the the original Gundam to the ?? Gundam, and updated with state-of-the-art technologies introduced at the time.

The ? Gundam's design also focuses on versatility and operational aspects as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycoframe, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.

Although its development was only partially completed at the time of its deployment, the ? Gundam proved itself to be a formidable mobile suit. The operating data obtained from the Silver Bullet (Funnel Test Type) was used in its development. It is the first Gundam-type machine to be equipped with Funnels. A newly developed MS control program is installed to account for the ? Gundam's center of mass during the separation and movement of the Funnel equipment.

Incorporating the Psycoframe technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ? Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a suitable Newtype pilot. When combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art mobile suit was able to almost single-handedly hold the whole Neo Zeon force by just itself, and its Psycoframe was put to the test to determine the history of humanity living on earth.

Following Amuro's failure to stop Char in attempting to drop Fifth Luna, Amuro decided to design a mobile suit that would be able to combat Char's MSN-04 Sazabi. This machine, the RX-93 Nu Gundam, was designed not only to be the true upgrade to the RX-78-2 Gundam, but also to be the ultimate Gundam. Unknown to Amuro, though, Char realized this would be the case and allowed Anaheim Electronics to pass on the psycho-frame technology for the Nu Gundam's use. However, testing of this machine would be interrupted when fighting between Londo Bell and Neo Zeon forces force Amuro and his girlfriend Chan Agi to take the half-completed Nu Gundam with them to save everyone.

Sadly, the lack of testing would easily been shown when, during one skirmish, Amuro's panicking caused his fin funnels to react, forcing Gyunei Guss to kill his captive, Kayra Su. As Londo Bell forces moved to stop Char from dropping Axis, Amuro and Char would go head to head, battling one another and practically ravaging their suits. In the end, another flaw revealed itself - the psycho-frame resonated with high emotions, pushing Amuro's already amazing Newtype powers to new heights, and managed to push Axis away from the Earth. The resonance creates a light that could be seen from Earth. The fate of both pilots however is unknown and remains a big mystery even to this day.


Weapons 

  • Beam Rifle - A high-powered beam rifle with a normal output of 3.8MW. It can be recharged by e-caps and with a greater fire rate than most beam rifles.

  • Beam Saber - The ? Gundam has a standard-issue beam saber stored on its left forearm, which can be drawn quickly to attack enemies in close range.

  • Fin Funnels - A form of remote weapon unique to the ? Gundam. Despite their name, the fin funnels equipped on ? Gundam are in function "bits", since they have built-in generators rather than the E-caps used by funnels. While this made them much more expensive to construct, and allowed less modules to be equipping than the standard, this had the enormous benefit of giving the fin funnels a tremendously long operational time. Circling the battlefield on their own, the fin funnels could be utilized in far more creative and strategic ways than standard funnels. Model number: AEV/PFF93AR.The actual beam fired by the fin funnels was also more powerful, given that they are emitted by a generator instead of an E-cap. The fin funnels also had the ability to generate a unique beam shield, known as a "fin funnel barrier", to provide a defense against both beam weaponry and solid projectiles with lower outputs compared to the beam shield's power consumption. Although these unique funnels proved incredibly effective and flexible in purpose, they were also much larger than the standard funnel, making them easier targets to shoot down. With the help of the Psycoframe technology, Amuro can utilize its fin funnels more effectively by thoughts alone.

  • v-Hyper Bazooka - 280mm bazooka that can be fired from its position on the backpack.

  • Shield - Issued on the ? Gundam is a custom shield emblazoned with Amuro's emblem. It features a built-in beam cannon and missile launchers. Amuro uses it in many strategic ways, such as fooling enemies that he was shot down by leaving the shield and the v-Hyper Bazooka, and attacking enemies once they lower their guards.

  • Large Beam Saber - Stored on the backpack, this beam saber presumably has a higher power rating than the saber stored on the left wrist and is used more often than the standard saber. The saber's pommel is capable of emitting a beam dagger on its end, but it is never seen used.

  • Vulcan Guns - Two head mounted 90mm vulcan guns that have been seen to shred armor.

  • Birdlime launchers - Fires an adhesive substance from the hands that can be used to repair small cracks in colony wall or to restrain soldiers on foot.

  • Dummy Launchers - Stored in the hands the launchers can deploy mobile suit sized dummy balloons as a decoys.

  • Psycoframe cockpit - The cockpit is composed of microscopic Psycommu receptors that allows the pilot to control the suit as if it is his/her own body.

RM259.00
RM259.00 Add to cart
img
SAVERM243.10

MG 1/100 MSN-04 Sazabi Ver.Ka

  • A year after the launching of MG ?Gundam Ver.Ka, the rival mobile suit Sazabi Ver.Ka is rolling out. 
  • New materials are adopted for silver frames. Texture of metal can be got without paint. 
  • The hatches of the funnel containers on the back are openable. 6 funnels are removable. The covers of Apogee Motors open in four directions. 
  • Includes original markings designed by Katoki Hajime. 
  • Besides a beam shot rifle, a shield, a beam tomahawk and a beam saber, a long rifle which is the first plastic model of the long rifle that was drawn on the image board at the beginning is included. 
  • The mono-eye on the head can be luminescent when the LED Unit Green, which is sold separately, is installed. 
  • Hand parts with "Emotion Manipulator SP" are included. All of the finger joints are movable. Even the thumbs base joints can be moved easily. 
  • Runner x31, Sticker x3, Instruction manual x1

RM320.00
RM320.00 Add to cart
img
SAVERM184.30

MG 1/100 Hi-Nu Hi-v Hi Nu Hi v Gundam Ver.Ka

  • Hi-? Gundam joins the MG lineup in Ver.Ka. Under the supervision of Hajime Katoki, a mechanic designer, it appears with a brand-new figure. 
  • Applied the know-how of MG ? Gundam Ver.Ka, it has reproduction of the differences of the armor, weapons and the signature Fin Funnel. 
  • LED unit can be mounted. 
  • Hidden weapons are in its forearms. 
  • The thrusters of each parts are movable. 
  • A large variety of weapons are included. Weapons can be mounted. 
  • Includes a special display stand. 

RM259.00
RM259.00 Add to cart
img
SAVERM112.32

MG 1/100 Victory Two / V2 Gundam Ver.Ka

  • MG commercialization hope Ranked # 1! MG V2 Gundam Ver.Ka finally here!
  • The height of the difficulty of the function realizing it was one of the factors that hinder the commercialization. In the 1/60 kit issued to broadcast at that time, the shape becomes the sacrifice in that you have to reproduce the head storage mechanism to the core fighter, it has become the impression of sagging breasts. Elimination of this part was one of the proposition. The coalescence mechanism, and technology developed through the armor extension gimmick designed in such as MG V Gundam Ver.Ka has been utilized. Regarding Speaking of V2 high demand [Assault] [Buster] equipment, is now planned also technology validation toward commercialization in the center of the mounting mechanism of additional equipment. After these processes, it became a carry that finally can be released on 35th anniversary of Gundam.
  • It comes with parts to reproduce the grenade launcher by mounted on the beam rifle. Hand-gun also possible restructuring in the parts retrofit.
  • Head precision fire for the device with the included.
  • V2 Core Fighter 2 aircraft accessories. V2 top fighter and V2 at the same time display allows the bottom fighter.
  • Accessories: beam saber × 2, beam saber (fan), beam rifle, beam shield (PET), V2 core Fighter × 2, twin-type grenade launcher reproduction for parts, Shakti figure (falling), pilot figure × 2

RM157.50
RM157.50 Add to cart
img
SAVERM30.00

[Daban] PG 1/60 GAT-X105 Strike Gundam Figther

[Daban] 1/60 GAT-X105 Strike Gundam (PG)

Series: Gundam Seed
Grade:PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai product 

RM250.00
RM250.00 Add to cart
img
SAVERM50.00

[Daban] PG 1/60 RX-0 Unicorn Gundam (Final Battle Ver.)

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60
Model: Final Battle Version 

Included components

* Special : Metallic Green Psycho Frame & Clear Green Psycho Frame (1each)

* Main Body x1

* Shield x3 (Final Battle)

* Beam Magnum x1

* Beam Magnum backup cartridge x1

* Beam gatling gun x2

* Beam saber x4

* Beam bazooka x1

* Display base

* Detron stickers for all markings


Please note  that this is Not-Bandai product

RM400.00
RM400.00 Add to cart
img
SAVERM161.90

MG 1/100 ZZ Gundam Ver.Ka

MG 1/100 ZZ Gundam Ver.Ka



- The long-awaited MG Double Zeta Gundam Ver.Ka finally appeared!

- A wide range of motion of each part and installation of a core / block system, realization of deformation to each form!
- Shoulder joints are provided with multiple movable axes, securing a movable range that can reproduce action pauses like Double Zeta Gundam.
- The knee joint makes full use of the latest know-how, reproducing deep [bending] while reproducing complex deformation.
- By adopting the 3 axis structure which was not so far in the lumbar region, it is possible to [twist of waist] [bend forward] while having the deformation function.
- It can be transformed into each form such as G Fortress. Adjust the structure and shape of each part to the limit, pursue a form that seems to be aircraft that eliminated the remnants of humanoids.
- Two core fighters are included, and the union scene of the opening can be reproduced.
- Added [Extra Finish] processing to some parts, adding a dignified feeling that can not be produced with molded articles alone.
- By placing lining parts in places without frames, high detail appearance is realized even when deformed.

- accessories
* Double beam . rifle x 1
 Hyper . Beam . Saber x 2
 Hand grip (right and left) x 1 each
 Saber hand (left and right) x 1 each
 Hand for transformation (right and left) x 1 each
*  Weapon possession (right) x 1

- Product content
 Molded article x 17
 Foil seal x 1
 Water transfer type decal x 1
 Instruction manual x 1

RM227.50
RM227.50 Add to cart
img
SAVERM15.00

Ryan Model ZG002 MG 1/100 Psycho Zaku Damaged Version + Thunderbolt 78 Damage Base

Ryan Model ZG002 MG 1/100 Psycho Zaku Damaged Version + Thunderbolt 78 Damage Base


Model : Psycho Zaku
Grade : Ver. Ka
Scale : 1/100

Please note that this is Not-Bandai product

RM170.00
RM170.00 Add to cart
img
SAVERM139.40

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka

Unicorn Gundam Ver. Ka again - Unit 2 Banshe finally rolled out with Ver.

- Change psycho frame to clear yellow.
- Changing colors according to the molding color, Ver.Ka unique marking water transfer decal included.
- Besides Beam -  · Magnum and Shield, weapons parts such as Hyper -  · Bazooka are enriched.

[accessories]
- Beam . Magnum x 1
- Shield x 1
- Hyper  bazooka x 1
- Beam saber x 2

[Product content]
- Molded article x 22
- Foil seal x 1
- Water transfer type decal x 1
- Instruction manual x 1

RM196.00
RM196.00 Add to cart
img
SAVERM180.00

[Daban] Perfect Grade PG 1/60 Exia Avalanche / Repair with LED

Daban 1/60 Exia Avalanche/Repair


Limited edition including -  

  • PG Exia model kit
  • PG Exia use LED
  • PG Avalanche parts
  • PG Repair parts

Limited stock release

This package does not include Assembly Manual hard copy. Please download the link provided below:

Installation Manual

RM500.00
RM500.00 Add to cart
img
SAVERM283.90

MG 1/100 FAZZ Ver. Ka

-From [Gundam Sentinel], FAZZ is three-dimensional with MG Ver.Ka!

-Under the supervision of Hajime Katoki, armament and additional armor are composed with new interpretations. Pursuing proportions that do not become dull while maintaining a profound feeling.
-Uses a movable roll for the forearm to achieve a wide range of movement. When the arm is raised horizontally, it is structured to move in conjunction so that the additional armor does not interfere.
-When raising the legs, additional armor of the front armor is deployed upwards to ensure a range of motion.
-Missile pods loaded in various places are reproduced with interpretation unique to Ver.Ka. You can also open and close the hatch manually and enjoy the built-in missile display.
-Includes Ver.Ka decals that include different chest numbering. The FAZZ platoon in the work can be reproduced.

[accessories]
  • Double beam rifle x 1
  • Hyper Mega Canon x 1
  • Water transfer decal x 1
  • Foil seal x 1

RM399.00
RM399.00 Add to cart
img
SAVERM5.00

[Nilson Work] PG 1/60 Astray Red Frame Gundam - with Backpack Flight unit, 4 katana and Circle base stand

* Ready Stock Unit *

Brand : Nilson Work
Scale : 1/60
Grade : Perfect Grade / PG
Model : Astray Red Frame

Package Include :
- Model kits body
- Flight Unit
- Katana  x 4
- PG Stand 

RM475.00
RM475.00 Add to cart
img
SAVERM199.20

MG 1/100 Sinanju Stein (Narrative Ver.) Ver. Ka

This Master Grade model kit of the Sinanju Stein, as seen in "Mobile Suit Gundam Narrative," features an updated design! 

The engraving on the Sleeves emblem is divided into parts for ease of assembly; the beam axe can be connected and equipped as a long-beam naginata, and the beam parts can also be deployed while attached to the shield. Emotion Manipulator SP is used for the hand parts, and each finger can move independently! 

The flexible leg thrusters can be moved independently with their lift arms; the cockpit can open and close, and the vertical movement of the chest block can also be reproduced. 

Two figures of Zoltan Akkanen are included: sitting and standing. 

Order this incredible Gundam for your own collection today!

[Includes]:

  • Shield
  • High beam rifle
  • Grenade launcher
  • Beam axe (x2)
  • Bazooka
  • Beam saber (x2)
  • Effect parts (x1 set)
  • Interchangeable hands (x1 set)
  • Figures (x2)
  • Joint parts (x1 set)
  • Stickers

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

RM280.00
RM280.00 Add to cart
img
SAVERM1294.00

PG Unleashed 1/60 RX-93 v Gundam Nu Gundam

The Nu Gundam debuts the new 1/60-scale "Perfect Grade Unleashed" model-kit lineup, celebrating the 45th anniversary of Gunpla with Bandai's latest and greatest technology! This new lineup recreates the internal structure to the utmost; the Ultimate Unit System allows you to experience the construction of a mobile suit by assembling each part into a convincing structure.

This kit includes a large-scale recreation of the Psycommu weapon known as the Fin Funnel.
In addition to the beam rifle and shield with built-in sliding and deploying gimmicks, two types of beam sabers and a New Hyper Bazooka are included. The New Hyper Bazooka can be equipped with an original New Hyper Bazooka Support Arm. 
The truss parts of the frame are molded in metallic colors for a realistic texture.
The frame is reproduced in multiple colors, including metallic. Multi-layered plastic stickers are used for areas that resemble light-emitting parts.
Etching stickers are used too, reproduced with the precision only possible with metal parts.
Metal parts are used for the nozzles of the main thrusters and the firing ports of the head-mounted Vulcans.
The Psyco Frame placed in the cockpit block has been subjected to secondary processing to reproduce the light-emitting phenomenon of the Psyco Frame.
A cover sticker is included, which allows you to recreate the opening scene of the movie.
By attaching holding parts to the pillars of the included base, you can stably display the Nu Gundam equipped with the fin funnels.

Order this amazing mech for your own collection today!

Includes:
Beam rilfe
Beam saber (x1 set)
Shield
New Hyper Bazooka
Face parts (light-emitting/non-light-emitting, x1 each)
Interchangeable hands (left and right, x4 each)
Joint parts (x1 set)
Figure (x2)
Metal parts (3 types, x1 set)
Lead wire (x2)
Sensor cover sticker
Marking sticker
Etching sticker (x2)
Metallic 3D sticker
Dedicated base

RM2300.00
RM2300.00 Add to cart
img
SAVERM149.00

PG 1/60 RX-178 Gundam MK-II (A.E.U.G) (Daban Non-Bandai)

PG 1/60 RX-178 Gundam MK-II (A.E.U.G)

Brand : Daban 
Grade : Perfect Grade
Scale : 1/60

Please note that this is Non-Bandai product

RM250.00
RM250.00 Add to cart
img
PO PriceRM198.00

Ryan Model MG 1/100 Psycho Zaku Ver.Ka with Water Decal

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAY 2025
Estimate arrival : JUN 2025

- P-O Price RM198.00
- Deposit RM30.00, Balance RM168.00
- We will inform to make balance RM168.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Third Party Brand MG 1/100 Psycho Zaku Ver.Ka (Gundam Thunderbolt Ver.)

Brand : ?? Model
Scale : 1/100
Grade : MG Ver.Ka
Water Decal Included

Please note that this is Non-Bandai product

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
SAVERM44.90

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

Estimate Arrival : September 2017

RM274.10
img
SAVERM457.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM920.00
img
SAVERM428.20

P-Bandai PG 1/60 Gundam Astray Blue Frame

P-Bandai PG 1/60 Gundam Astray Blue Frame (2nd Issue)


From MOBILE SUIT GUNDAM SEED ASTRAY,

"The Best Mercenary" GUNDAM ASTRAY BLUE FRAME is joining the Perfect Grade!

Perfect Grade perfecting the true meaning of BLUE FRAME------------------

Excellent shape & color replication. Brand new weapons, figures, and markings included.

-------------------------------------------------------------------

* 'M68 "Cattus" 500mm Recoilless Gun' included

The huge weapon 'M68 Cattus 500mm Recoilless Rifle is included with brand new design.

Trigger adjustment, extendable barrel, and detachable missile rack, various gimmicks set to increase the play value.

Size(total length)・・・in stored state: about 265mm/in deployed state: about 280mm

* Original Marking included.
Brand new marks such as caution marks are included, along with Gai Murakumo's personal mark.

* Figure included
2 types of new Gai Murakumo figures in the same scale are included (standing ver./sitting in cockpit ver.)

* Perfect Grade's extremely wide movability.

PG GUNDAM ASTRAYs possess the 'Movable Inner Skeleton" to achieve the flexible and dynamic movability.
By linking the armor to the frames and multiple joints, it's possible to create poses similar to human bodies.

The knee parts and knee joints are die casted to improve durability when posed.

* Camera Eye Light
The Camera Eyes (eyes) on the head are built with light unit inside, and can be lit with batteries (sold separately)

*Required Battery: CR1220 (sold separately) x1 
Weapons: M68 "Cattus" 500mm Recoilless Gun, Beam Rifle, Beam Saber, Shield

RM950.00
img
SAVERM300.00

[MECHANICORE] 1/72 MAS-20 PYRANNOSAURUS



    *** PRODUCT SPECIFICATION***

  • 1. Head Height : 260MM
  • 2. Height : 285MM
  • 3. Depth : 151MM
  • 4. Mega Cannon Length : 324MM
  • 5. Mega Shield : 240 x 130MM
  • 6. Plastic parts : Approx~ 1650 pcs
  • 7. Maintenance valve : 55
  • 9. Valve metal hinges : 19
  • 10. LED = 28
  • 11. Power Control Unit
  • 12. Specified Platform and Stand Bundled
  • 13. Premium Exclusive : Heavy Laser Rifle bundled

RM1480.00
RM1480.00 Request Stock
img
SAVERM30.00

MG 1/100 V2 Assault-Buster Gundam Ver. Ka [Box Dented]

Box Condition: Dented, but item contents are in good condition.

Reissue Date : Jun 2020
Estimate Delivery : Aug/Sept 2020

T h e  U l t i m a t e  M o b i l e  S u i t  o f  t h e  U n i v e r s a l  C e n t u r y
V i c t o r y  T w o  A s s a u l t  B u s t e r  G u n d a m, T a k e s  O f f.

The final form of Victory Two Gundam is reproduced in MG "Ver.Ka" series !
Additional weapons across its body are reproduced by new moldings.
Renewed color moldings reproduce the suit's rich and heavy texture.

* Gimmicks and style coexist in this ultimate Victory Two Assault Buster Gundam "Ver.Ka."
* Additional weapons of the -  Assault Buster - mode, including its heavy weapons and offensive/defensive armaments, are reproduced by new moldings.

* MEGA BEAM RIFLE
- The giant Mega Beam Rifle composed of the barrel unit and the control unit is reproduced by new moldings.
- The barrel unit slides and the grip, aim sensor and the heat exhaust fins include transforming gimmicks.

* V.S.B.R
- V.S.B.Rs on the waist are reproduced by new moldings. Their transformed mode can be reproduced via slide gimmick.

* MEGA BEAM SHIELD
- The Mega Beam Shield is reproduced by new moldings. The three barrier bits can be split and detached.

* MICRO MISSILE POD
- The six Missile Pods on the Waist and Leg parts can be replaced with parts reproducing the hatches either closed or opened.

* MEGA BEAM CANON / SPRAY BEAM POD
- Mega Beam Canon and Spray Beam Pod, additional weapons on the backpack, are reproduced by new moldings.

* Victory Two Assault Gundam and Victory Two Buster Gundam can be reproduced via reassembly.
- Additional weapons and armors can be removed and reattached, allowing the switching between the heavy-armored Assault mode and the heavy-armed Buster mode by reassembling its parts.

* Body's coloring renewed for reproducing its rich and heavy texture
- Its characteristic yellow and gold parts are colored by matte gold coating.
- Also its red, blue, and white parts are renewed to match its image in the original anime.

* Updated Parts for MS main body included 
- Includes updated parts of the newly structured internal frame and parts of exteriors to hold the various armaments of "Assault Buster."

* "Ver.Ka" marking
- Includes newly designed water decal markings for enjoying the "Ver.Ka" Victory Two Assault Buster Gundam.

* Full color package
- The full color package uses newly drawn illustrations by Katoki Hajime.

[Set details]
Victory Two Gundam Ver. Ka body set  / Buster Parts set /  Assault Parts set / Updated Parts for main body / "Ver.Ka" Water decal

RM390.00
img
SAVERM35.80

P-Bandai : MG 1/100 RGZ-91B Re-GZ Custom


The RGZ-91B ReGZ Custom from MSV that was designed by Mika Akitaka arrives in the Master Grade series!

From weapons, backpack, head, shoulder armor parts, and more, this kit offers variety of changes, with entirely new molds and upgraded parts from its old MG Re-GZ model.


Accessories:
- Beam Assault Rifle
- Hyper Beam Saber x 2
- Shield

RM320.00
img
SAVERM40.00

Gao Gao PG 1/60 OO Raiser Gundam

Gao Gao PG 1/60 OO Raiser Gundam

RM380.00
Gundam enthusiasts and model kit collectors, prepare to be amazed by the level of detail and accuracy of BANDAI Perfect Grade Gundam model kits. The PG Gundam series is renowned for its high-quality construction and intricate designs, making it a must-have for any serious collector. From the intricate mechanical parts to the attention to detail in the paint job, the Perfect Grade Gundam models are a testament to the craftsmanship of MegaHouse, the company behind this iconic line of model kits.

Whether you are a seasoned builder or just starting out, the Perfect Grade Gundam series is sure to impress. These PG Gundam models are perfect for those who want to build a truly stunning and accurate representation of their favorite Gundam characters. So, add a piece of Gundam history to your collection today and experience the ultimate in model kit perfection with the Perfect Grade Gundam line.

Perfect Grade (PG) is the ultimate series of Gunpla kits created by Bandai. A 1/60 scale Gunpla kits with significant external and internal details. The Perfect Grade kits are the most expensive Gunpla ever produced and have often been used to develop Master Grade and Real Grade series Gunpla Model Kit.

In 2020, Bandai introduced a new sub-line Perfect Grade Unleased featuring kits with increased complexity and diecast metal parts to commemorate the 40th anniversary of Gunpla.

Showing 1 - 30 of 108 products