Price Clear







Showing Gundam Model Kits product(s)

Showing 181 - 210 of 2720 products

img
SAVERM97.10

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM136.50
RM136.50 Add to cart
img
SAVERM17.00

SD Ex-Standard Astray Red Frame

  • Bandai's latest SuperDeformed Series; SD EX-STANDARD SDEX Gundam Astray Red Frame gunpla model kit has finally reached our shore! This kit gona be one of the upcoming best seller product. Grab one for yourself now!
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM18.90
img
SAVERM54.80

[189] HGUC 1/144 V2 Assault Buster Gundam

- V Gundam strengthening form is finally appeared in HG! Reproduce the genealogy of Victory type!

- 3 form can be reproduced in the selection formula! Assault parts supplied, by the combination of Buster parts, it can reproduce the form of 3 Gundam.
- Megabimu rifle, other Megabimu shield, Assault parts, Buster parts each comes complete with the new.

- V2 Assault Gundam ... V2 Gundam aircraft equipped with a golden armor options for systemic. While mobility and motility fall slightly, have I field generator and Thailand beam armor with the order of magnitude of the defense force, disable most of the beam attack, was performed buried enemy in Vesper of both hips.

- V2 Buster Gundam ... V2 Gundam equipped with aircraft the heavily armed for options to systemic. While mobility and motility fall slightly, it is possible to bury a large number of enemies in making full use of the Megabimu Cannon and spray beam pod with the order of magnitude of the attack force.

- V2 Assault Buster Gundam ... I have both the defense force of overwhelming offensive power and impregnable in at the same time equipped with aircraft Assault and Buster of both options to V2 Gundam.

- Accessories: Megabimu rifle, Megabimu shield, beam rifle, V2 core fighter, assault parts, Buster parts

RM77.00
img
SAVERM194.20

MG 1/100 Hyaku Shiki Ver.2.0

  • MG Hyaku-Shiki is reborn as Ver.2.0. 
  • Based on the Movable Frame of "MG Gundam Mk-II Ver.2.0", the MS features transformational gimmicks and realizes a range of motion close to that of human. 
  • The light emissions from the Camera Eye seen in the anime can be recreated. Use replacement parts to recreate "standard mode", "Dual Eye mode" and "Scanning Beam modes". 
  • Based on the celluloid pictures, reddish gold for the exclusive use of Ver.2.0 is plated. 
  • The Clay Bazooka and Beam Rifle can be hung from the Backpack. The blade of the Beam Saber is recreated with clear parts. 
  • Runner x14, Foil sticker x1, Tetron sticker x1, Instruction manual x1 

RM273.00
RM273.00 Add to cart
img
SAVERM34.90

[190] HG REVIVE 1/144 Guncannon

  • Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`

  • Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!

  • REVIVE1: characteristic proportions
    By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.

  • REVIVE2: can be bold poses
    You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.

  • REVIVE3: the ease of set and pursue
    Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.

  • REVIVE4: also included parts enhance
    Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.
Accessories: 240mm low recoil Cannon × set, beam rifle, grip hand (left and right), upward smack (left and right)

RM49.00
img
SAVERM69.70

[019] RG 1/144 Gundam Astray Red Frame

  • Adopted the inner frame system "The Advanced MS Joint". 
  • Inner frames and outer armor move relative to each other, just like real human. 
  • The finely color-coded parts can express the shades without painting. 
  • Luster of metal can be expressed with realistic decals. 
  • Includes various marking stickers. 
  • The Japanese sword "Gerbera Straight", is silver color plated. The pattern on the blade is also reproduced. 
  • Includes a beam rifle, beam sabers and a shield. 
  • Runner x9, Realistic decal x1, Instruction manual x1

RM98.00
img
SAVERM49.80

[192] HG REVIVE 1/144 Freedom Gundam

  • Freshly-created Freedom Gundam appears. 
  • Its sharp style and wide range of motion enable dynamic action. Double joint system enables natural motion in the abdominal area. Legs have broad range of motion. 
  • Shoulders can be widely moved up and down. 
  • Includes a Beam Rifle, Beam Sabers and a Shield. Two sabers can be connected each other. Runner x12, Foil sticker x1, Instruction manual x1

RM70.00
img
SAVERM67.20

Reconguista in G [17] - Gundam G-Self (Perfect Pack Equipped)

Big success story late! Equipped with a state-of-the-art back pack, the final decisive battle specification of Gundam G- self is finally here!

Appeared in 22 episodes. And equipped with G- self backpack state-of-the-art that has been developed by Venus Guroubu. The mode conversion to exhibit performance equivalent to backpack ever G- self is used. Space for the mode also in this kit, can be reproduced each mode, including the atmosphere mode.

It can be deformed to Assault mode by expanding the backpack. To allow long-distance attack in Assault pack upset.

Adopt a clear part in the reflector part. Possible to faithfully reproduce the image in the play.
Dedicated shield reproduced in clear parts. By also smack parts, [first behavior] of the first episode pause can be replicated. Stand is also included.

Accessories: beam rifle, beam saber x2, shield, Perfect Pack, Stand

RM94.50
img
SAVERM44.80

[399] Legend BB Versal Knight Gundam (SD)

  • Accessories: electromagnetic lance, Basarusodo, sheath, Night Flyer, cloak

RM63.00
img
SAVERM29.90

[001] HGIBO 1/144 Gundam Barbatos

  • The Gundam Barbatos from Mobile Suit Gundam: IRON-BLOODED ORPHANS arrives as a Gunpla kit packed with play value! 
  • Detailed molding and marking stickers combine to recreate its in-show colors with no need for paint, and it can be converted between forms. 
  • Weapons and some armor can be swapped with other kits to further customize your Barbatos! 
  • Weapons in this kit include its mace and sword. 
  • First production has been run out, no "Gundam Barbatos" and "Mikazuki Augus" promo cards include.

RM42.00
img
SAVERM26.90

[002] HGIBO 1/144 Graze Standard / Commander Type

  • Gjallarhorn's front-line suit from Mobile Suit Gundam: IRON-BLOODED ORPHANS is here! 
  • Add or remove the commander type's horn at any time. 
  • The head opens, revealing intricate internal mechanisms! 
  • Weapons include its rifle and hip-mountable battleaxe.
  • Stock starts coming tomorrow 11/October/2015

RM45.00
img
SAVERM37.94

[194] HG REVIVE 1/144 Gundam MK-II (Titans)

  • The fifth HG REVIVE release is the Titans' black Gundam Mk-II from Mobile Suit Zeta Gundam! 
  • Just as posable as the AEUG version, this Titans release features parts and decals in their color scheme. 
  • Te-tron stickers for unit number markings 1-3 are also included.

RM52.00
img
SAVERM42.30

[193] HG REVIVE 1/144 Gundam MK-II (A.E.U.G.)

  • The fourth HG REVIVE release is the AEUG's white Gundam Mk-II from Mobile Suit Zeta Gundam! 
  • A complete resculpt for the new format further refines its proportions. Its elbows and knees are double-jointed for extreme flexibility. 
  • Includes shield, bazooka, vulcan pod, and more!

RM59.50
img
SAVERM69.70

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM98.00
img
SAVERM112.32

MG 1/100 Victory Two / V2 Gundam Ver.Ka

  • MG commercialization hope Ranked # 1! MG V2 Gundam Ver.Ka finally here!
  • The height of the difficulty of the function realizing it was one of the factors that hinder the commercialization. In the 1/60 kit issued to broadcast at that time, the shape becomes the sacrifice in that you have to reproduce the head storage mechanism to the core fighter, it has become the impression of sagging breasts. Elimination of this part was one of the proposition. The coalescence mechanism, and technology developed through the armor extension gimmick designed in such as MG V Gundam Ver.Ka has been utilized. Regarding Speaking of V2 high demand [Assault] [Buster] equipment, is now planned also technology validation toward commercialization in the center of the mounting mechanism of additional equipment. After these processes, it became a carry that finally can be released on 35th anniversary of Gundam.
  • It comes with parts to reproduce the grenade launcher by mounted on the beam rifle. Hand-gun also possible restructuring in the parts retrofit.
  • Head precision fire for the device with the included.
  • V2 Core Fighter 2 aircraft accessories. V2 top fighter and V2 at the same time display allows the bottom fighter.
  • Accessories: beam saber × 2, beam saber (fan), beam rifle, beam shield (PET), V2 core Fighter × 2, twin-type grenade launcher reproduction for parts, Shakti figure (falling), pilot figure × 2

RM157.50
RM157.50 Add to cart
img
SAVERM49.80

[195] HG REVIVE 1/144 Qubeley

 Sixth bullet appeared Kyuberei from the Mobile Suit Z Gundam]!

- Posing was impressive in the movie by the movable highly four flexible shoulder binder can be replicated.
- The nascent love machine Kyuberei of Haman in the latest format. On the basis of the drawing in the anime set and play, sharp modeling that edgy, reproduced in fine detail lines of 0.15mm, stylish design.
- Runner arrangement summarized in each site, beautiful set up by the wedge-shaped gate.
- In addition to the beam saber is included distinctive funnel. Beam saber parts can also be used as a beam gun fire effects.

RM70.00
img
SAVERM21.90

[009] HGIBO 1/144 Man Rodi

  • New production aircraft kits of [Orufenzu of Mobile Suit Gundam Blood and iron]!
  • Grey's, to line up a new production aircraft continued to Baili like! Military coloring and distinctive shape fidelity! Distinctive armed is also included as an option.
  • Also included, such as characteristic shape of the hammer chopper (provisional) and the sub-machine gun (provisional).
  • Weapons supplied with mountable on the back.
  • Accessories: submachine gun (provisional), hammer chopper (provisional)

RM50.00
img
SAVERM34.90

[010] HGIBO 1/144 Hyakuren (Amida Custom)

  • Innovative proportions buzz! The kit variations machine of well-trained!
  • Other proportions reproduce the unique airframe design, distinctive coloring of Amida machine also reproduced in the molded color and seal.
  • Assault rifle (provisional) appeared as a new armed parts for Amida machine! Other, which is a standard armed rifle (provisional), blade (provisional) is also included!
  • Accessories: Assault rifle (provisional), rifle (provisional), blade (provisional)

RM49.00
img
SAVERM17.08

SD Ex-Standard Gundam Exia

  • SD Ex-Standard GN-001 Gundam Exia
  • SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. 
  • Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

RM18.90
img
SAVERM17.08

SD Ex-Standard Wing Gundam Zero EW

  • SD Ex-Standard XXXG-00W0 Wing Gundam Zero EW
  • SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM18.90
img
SAVERM17.08

SD Ex-Standard Unicorn Gundam Destroy Mode

  • Part of the new SD Gundam EX-Standard product line the Unicorn Gundam in Destroy Mode has been recreated with an emphasis on articulation and enhanced proportion. 
  • Weapons include beam rifle and shield. 
  • Runner x4, sticker, instruction manual. 
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM18.90
img
SAVERM27.90

[012] HGIBO 1/144 Ryusei-go (Graze Custom II)

  • Akihiro Altland's upgraded Graze from Mobile Suit Gundam: Iron-Blooded Orphans becomes a kit! 
  • Its head, shoulders, and hips are all sculpted anew, along with new coloring! 
  • Its unique head markings are recreated with sticker decals. 
  • Along with a 120mm rifle and 9.8m battleaxe, it comes armed with a brand-new short-barreled rifle! 

RM56.00
img
SAVERM97.10

MG 1/100 MSM-03 Gogg

  • MSM-03 Gogg (MG)
Finally, a Master-Grade kit of the MSM-03 Gogg, Zeon's mass production amphibious MS! Superb design and tooling by Bandai mean that your Gogg, when built, will be able to stand in just about any pose you might have seen in the Gundam anime! Bandai's inner frame system is highly jointed, with armor parts laid over top of a flexible inner skeleton, making those long arms more poseable than they look.

RM136.50
RM136.50 Add to cart
img
SAVERM69.70

[021] RG 1/144 Gundam 00 Qan[T]

[21] GNT-0000 00 QAN[T] Gundam (RG)
  • Appeared finally to RG is Quanta hugely popular!
  • CONCEPT
    Pursuing a structure that feel [realistic] from the assembly stage. 
    Exia, followed the history that has been developed in light of the Double O, while utilizing the Advance de MS joint of the same type, reproduce the aircraft characteristics of Quanta. By renew the joint structure and mechanical gimmick, to achieve a high mobile performance and the amount of information.
  • RG ever largest action of
    Such as the Sword by renewed movable shaft position and the movable angle of the arm joints protrude horizontally, it improved posing performance.
    Greatly extend the range of motion of the leg by renewed moving method of waist armor. Achieve a more dynamic action poses.
  • Realistic gimmick that created from historical research based on real technology
    Renewed the GN drive attaching and detaching mechanism, fully reproduce the mechanical removable gimmick by adopting a mounting gimmick that also serves as fixing of the back pack.
    By providing the moving point of up to seven, realizing a flexible arm moving.
    GN shield deployment by the arm is to renew the movable shaft, achieve a high range of motion!
  • GN capacitor mounted frame
    While utilizing the Advanced MS joint of RG Exia the same type, the arm is completely new parts reproduction. The reproducibility capacitor disposed systemically.
  • Bit recombinant gimmick GN Sword V
    Characteristic weapon of double oak Anta - bit recombination gimmick also complete reproduction. Grip is equipped with a slide deployment mechanism. GN Sword bit can be attached to the shield.
  • Accessories: GN Sword V, GN sword bit, GN shield, simple stand, weapon possession (left and right), fist (left and right), the movable hand (left and right), palm (left), pilot figure


Item Size : 31 x 19 x 7.5 cm

RM98.00
img
SAVERM11.90

[019] HGIBO 1/144 Gundam Astaroth

  • Also appeared in the HG series early official Gaiden protagonist machine [Gundam Astaroth]!
  • In accordance with the development of the popular [Orufenzu of Mobile Suit Gundam Blood and iron] official Gaiden, kit the protagonist machine in HG series.
  • Faithfully reproduce the distinctive proportions that followed the view of the world!
  • Enjoy Parts retrofit in various combinations by providing a hole of 3mm diameter throughout the body.
  • In addition Barbados other, a built-in Gundam frame fuselage and a common specification of the frame, it can also be customized with other products!
  • Left arm of the sub-knuckle is also possible equipment to other products.
  • Equipped with a gimmick large armed Demolition knife that can be modified for storage form. Other knife, comes with rifles.
  • Accessories: Demolition k-nife, rifle

RM48.00
img
SAVERM33.80

[018] HGIBO 1/144 Graze Ein

  • The massive Graze Ein from Mobile Suit Gundam: IRON-BLOODED ORPHANS is here! 
  • It's got manipulators both for gripping and for its screw punch, and even drill kick feet! 
  • Its backpack is adjustable to add extra impact to poses swinging its gigantic a-xe. 
  • And both left and right shoulder machine guns can be swapped in!

RM68.00
img
SAVERM17.00

SD Ex-Standard 00 Gundam

  • SD Ex-Standard GN-0000 00 Gundam
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM18.90
img
SAVERM30.00

[Daban] PG 1/60 GAT-X105 Strike Gundam Figther

[Daban] 1/60 GAT-X105 Strike Gundam (PG)

Series: Gundam Seed
Grade:PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai product 

RM250.00
RM250.00 Add to cart
img
SAVERM42.30

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • FUN TO BUILD
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • BEST PROPOTION
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • OPTION
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack

RM59.50
img
SAVERM52.30

[198] HG REVIVE 1/144 Force Impulse Gundam

  • Mobile Suit Gundam SEED DESTINY’s Force Impulse Gundam is reborn in the REVIVE lineup!
  • It maintains its stylish proportions even with fully-functional docking/splitting engineering. 
  • The kit also includes a high-energy beam rifle, shield, and Vajra beam saber.

RM73.50

Showing 181 - 210 of 2720 products