select distinct (productid) from product_subcategory_map where subcatid = 353

MS GUNDAM 0083: STARDUST MEMORY

Showing 1 - 30 of 39 products

img
SAVE RM26.10

HG 1/550 Mechanic RX-78GP03 Gundam Dendrobium

Yet another "wow" when I opened the box. A good affordable kit of the "Dendrobium" has been needed for a long time and Bandai finally serves one up. Hatches on the missile bays can be posed open or closed. The GP-03S is removable and slightly poseable. Claw units are poseable and you can have with or without the beam saber. Kit is largely snap-together but you do need cement and paint for the GP03S Steimen and the Garbera-Tetra.. Item Size/Weight : 32 x 19.3 x 8.4 cm / 430g

RM63.80
img
SAVE RM27.20

SDBB Gundam RX-78NT-1 & Gundam GP01Fb

- Inherit Gundam RX-78-2 Gundam justice to two great co-star! - NT-1 is enhanced armor [Armor Chobham] accepted wear! - Chobham armor Chobham original tank is BB! - Head Gear original BB. - GP01Fb Gundam is one of the episodes up to the movie [Retrofit] reproduced in the product! - The retrofit parts recombination, GP01 and can reproduce GP01Fb. - The newly added Makingushiru, SD yet, MG reminiscent of the dignity! - Accessories: Gundam RX-78NT-1 ... Armor Chobham, Gatling gun × 2, beam saber, shield - Accessories: Gundam GP01Fb ... GP01 retrofit parts, beam rifle, beam saber × 2, Shield

RM61.70
img
SAVE RM23.90

[013] HGUC 1/144 RX-78GP01 Gundam Zephyranthes

Item Size/Weight : 30 x 19 x 6.7 cm / 288g

RM48.00
img
SAVE RM20.80

HG 1/550 Mechanic AMX-002 Neue-Ziel

- 1 / 550 the size [Gundam GP03S] [Zaku F2] is attached. - Item Size/Weight : 29.9 x 19 x 6.8 cm / 283g

RM51.10
img
SAVE RM49.90

[012] RG 1/144 RX-78 GP01 Gundam Zephyranthes

  • Start-up plan in the RG series GP! - Simultaneous release of the two aircraft!
  • RG series of bullet 12,13 first prototype GP01 Gundam from [Mobile Suit Gundam 0083]
  • And (code name Zefiransasu), that the universe is a specification Furubanian.
  • The RG series is set anime called aircraft that are based on the RX78-2 Gundam renovation
  • I can have inheritance. As an expression, it was to improve the range of motion of the RG RX-78-2 Gundam on sale
  • Following the adoption of common development plan of the two aircraft in the play mode Advanced MS joint 5. In addition,
  • The core fighter is equipped with a horizontal connection mechanism. In addition, the repair of GP01 in the play
  • It Furubanian and core fighter aircraft design from a different background who became thus almost
  • The leg unit also design products while leaving the color of the ground war, specializing in aerospace
  • Dropped, they represent a set form that skillfully. In precise detail unique to RG
  • I have a real representation of mobile suits.
  • Fully reproduce the core block system. A gimmick, such as wings and nose rotation, backpack
  • By incorporating the core block system, which is one of the features of the first prototype Gundam,
  • Fully reproduce the deformation of the core Fighter II.
  • One year after the end of the war (Zefiransasu) ... first prototype Gundam RX-78GP-01
  • First prototype was born Gundam [Gundam Development Plan (Plan GP)] by.
  • Zefiransasu is a code name during development.
  • Accessories: beam rifle, beam saber × 2, Jytte beam, shield,
  • 1/144 pilot figure

RM100.00
img
SAVE RM48.90

[013] RG 1/144 RG-78 GP01FB Gundam Full Burnern

  • Start-up plan in the RG series GP! - Simultaneous release of the two aircraft!
  • RG series of bullet 12,13 first prototype GP01 Gundam from [Mobile Suit Gundam 0083]
  • And (code name Zefiransasu), that the universe is a specification Furubanian.
  • The RG series is set anime called aircraft that are based on the RX78-2 Gundam renovation
  • I can have inheritance. As an expression, it was to improve the range of motion of the RG RX-78-2 Gundam on sale
  • Following the adoption of common development plan of the two aircraft in the play mode Advanced MS joint 5. In addition,
  • The core fighter is equipped with a horizontal connection mechanism. In addition, the repair of GP01 in the play
  • It Furubanian and core fighter aircraft design from a different background who became thus almost
  • The leg unit also design products while leaving the color of the ground war, specializing in aerospace
  • Dropped, they represent a set form that skillfully. In precise detail unique to RG
  • I have a real representation of mobile suits.
  • Fully reproduce the core block system. A gimmick, such as wings and nose rotation, backpack
  • By incorporating the core block system, which is one of the features of the first prototype Gundam,
  • Fully reproduce the deformation of the core Fighter II.
  • Specification first prototype Gundam universe ... Furubanian first prototype Gundam RX-78GP-01Fb.
  • Standard specifications for equipment in the atmosphere, additional equipment for the purpose of improving mobility is applied.
  • And Universal Boost pod on the back, is one of the characteristic features.
  • Accessories: beam rifle, beam saber × 2, Jytte beam, shield,
  • 1/144 pilot figure

RM100.00
img
SAVE RM60.90

MG 1/100 RGM-79Q GM Quel

  • The first mass-produced Mobile Suit utilized by the (initially) anti-Zeon forces, the Titans, is realized as a Master Grade! Armed with a beam rifle, kinetic rifle, shield, and beam saber, the Quel is a force to be reckoned with. 
  • As with most Master Grades, this kit features details such as a 1/100 scale figure of the pilot, a 1/20 scale figure of engineer Nina Purpleton, and stick-on decals.
  • Item Size/Weight : 31 x 20 x 10 cm / 533g

RM119.00
img
SAVE RM33.70

P-Bandai Exclusive: HGBF 1/144 Gerbera Tetra (Kirara Custom)

P-Bandai Exclusive: 1/144 HGBF Gerbera Tetra (Kirara Custom)

RM140.00
img
SAVE RM53.90

MG 1/100 RX-79(G) Gundam Ez8

Back2Back

This "ground pounder" carries a backpack (could hold a car) which opens for weapons storage. Cockpit armor panels fold down. Includes an unpainted figure of Pilot Shiroh Amada. The instruction book is 19 pages and includes a "Documentary photographs" page, and painting guides. Weapons include Beam Rifle, 10mm Machine Gun, Hyper Bazooka (Ground Type), Beam Saber and Shield.

RM126.00
img
SAVE RM33.10

[025] HGUC 1/144 RX-78GP03S Gundam Stamen

Back2Back

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com

RM62.80
img
SAVE RM26.90

[018] HG 1/144 RX-78GP01FB Gundam Full Burnern

Back2Back

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern (Often mistranslated as "Gundam "Zephyranthes" Full Vernian") is the upgraded space use version of the RX-78GP01 Gundam "Zephyranthes". It is featured in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory. The unit is piloted by Kou Uraki.


The RX-78GP01-Fb Gundam "Full Burnern Zephyranthes" is a retrofit of the RX-78GP01 Gundam "Zephyranthes" with emphasis on space combat. This equipment was already completed by the time of the Gundam "Zephyranthes"' roll-out, but scheduled tests could not take place due to the damage during the battle with the Cima fleet. Though the GP01 was meant to operate in both Earth and Space, the Core Block System had to be swapped before each battle. After the GP01, still in its Earth configuration, was critically damaged in a battle with Cima Garahau, Anaheim Electronics took the remains of the Gundam and gave it a massive overhaul, creating the Gundam Full Burnern "Zephyranthes". The renovation process was completed in two days, with operational testing being carried out at Anaheim Electronics' Livermore factory.

Its armor is much more streamlined for better mobility in space, and thrusters are mounted in the legs, chest, and shoulder. The air-intakes on the chest are replaced with attitude control thrusters, with the covers expanding during use. Propellant tanks are built into the shins to further extend the operation time of the RX-78GP01-Fb. The backpack is equipped with built-in generators. Four additional thruster units are attached to the feet in the same manner as "shoes". The most noticeable addition to the GP01 are the two Universal Booster Pods on the backpack. They allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result , the pilot has to contend with high G-forces due to overwhelming acceleration.

RM62.00
img
SAVE RM35.90

[133] HGUC 1/144 DRA-C

Back2Back

  • Mass Production of the fleet de l'Ours, appeared in HGUC!
  • What HGUC Doratsutse finally appeared in the `0083`! Reproduce the huge leg and shoulder thrusters,
  • Stand is included, such as weapons and original play value that should not be missed.
  • Plastic parts left arm as the original play value of the Gatling Gun
  • Manipulator (hand) can be retrofit to the part. Gatling gun can be handheld.
  • The left hand can be equipped with a shield and saber!
  • Since moving to a wider range neck can be arranged in a flexible poses impressive space.
  • MS-21C Doratsutse ... MS has been developed by de l'Ours for the assault fleet. Space-
  • Be abolished by specialized legs, has been granted the propellant tanks and thrusters instead.
  • Accessories: beam saber, shield, gatling gun, flat hand (left), base

RM84.00
img
SAVE RM70.90

MG 1/100 RX-78GP02A Gundam Physalis

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 

Weight: 806g. 

RM169.00
img
SAVE RM21.50

[113] HGU 1/144 RGM-79C GM Type C

  • Jim breaks release additional new parts of the hand grip! - Added a new hands in the palm and grip. 
  • Accessories: bazooka, Beam Gun, Shield, Sabre (grip only)

RM50.40
img
SAVE RM62.86

MG 1/100 RX-78GP03 Gundam Stamen

  • The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  • Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  • The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  • Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  • Of course, the use of cement and paints will improve the appearance of a finished model.

RM147.00
img
SAVE RM33.40

[026] HGUC 1/144 MS-14Fs Gelgoog (Mrine Cima Custom)

Item Size/Weight : 31.2 x 19.1 x 8.2 cm / 375g

RM55.50
img
SAVE RM32.40

[159] HGUC 1/144 AGX-04 Gerbera Tetra

  • Accessories: Shutsurumu booster, propellant tanks × 2, beam machine gun, Beam saber × 2

RM75.50
img
SAVE RM51.00

MG 1/100 RGM-79C GM Type C

  • The RGM-79C GM Type C (aka GM KinsertUnorderedListai) is an improved version of one of the Earth Federation's first mass production mobile suit, the RGM-79(E) GM Early Type. It first appeared in Mobile Suit Gundam 0083: Stardust Memory.
  • Weapons:
  • Vulcan Gun
  • Beam Saber
  • HFW-GR·MR82-90mm Machine Gun
  • HFW-GR·MR82-90mm GM Rifle
  • 360mm Hyper Bazooka
  • Shield

RM97.90
img
SAVE RM61.80

MG 1/100 MS-06F-2 Zaku II F2

  • The MS-06F2 Zaku II F2 Type (also Zaku II Late production model) is a mass produced general purpose multi-class mobile suit and a variant of the original MS-06F Zaku II.
  • Weapons:
  • Shoulder Shield
  • 3-tube Missile Pod
  • MMP-78 120mm Machine Gun
  • MMP-80/90mm Ver.8 Machine Gun
  • 280mm Zaku Bazooka
  • 880mm Raketen Bazooka
  • Sturm Faust

RM118.10
img
SAVE RM53.90

MG 1/100 RGM-79N GM Custom

Held back by high production and operating costs, the GM Custom was nonetheless a commanding presence on the battlefield! 
While only armed with a beam rifle, kinetic rifle, beam saber, and shield like most GMs, this unit rivals the performance of seemingly more advanced Gundam-type Suits. 
As with all Master Grades, this kit features details such as a 1/100 seated scale figure of the pilot, a 1/20 scale figure of pilot South Burning, and decals to customize your kit.
Item Size/Weight : 31 x 20 x 10 cm / 612g

RM126.00
img
SAVE RM53.90

MG 1/100 MS-06F-2 Zaku II F2 (E.F.S.F. Color)

  • The MS-06F2 Zaku II F2 Type (also Zaku II Late production model) is a mass produced general purpose multi-class mobile suit and a variant of the original MS-06F Zaku II.
  • The MS-06F2 Zaku II F2 Type was an upgraded and improved version of the original MS-06F Zaku II, introduced in the middle of the One Year War because the original F-Type Zaku II was becoming outdated with the newer, more powerful Zaku variants, and later the more efficient MS-09B Dom and MS-14A Gelgoog mobile suit lines.
  • The F2 Type featured a slightly (approx. 4%) more powerful Minovsky fusion reactor than the standard Zaku. The Zeon's new Zaku II F2 Type had more armor placed around the cockpit's exterior, making projectile weapon attacks less effective at hitting the inner cockpit and reactor inside the torso. The F2 Type was also made significantly lighter in weight, which made the mobile suit much more fuel efficient. Because of this, the F2 Type had a greater operational time. The Zaku II F2 Type could also be outfitted with a pair of solid rocket boosters on its backpack that could give it a brief but tremendous increase in overall thruster output. The overall combination of a more powerful reactor and less weight made the F2 Type a more agile and maneuverable combatant. With these upgrades, the F2 Type would also be on a more equal ground when the Earth Federation began to field their first mass production mobile suit, the RGM-79 GM.
  • Weapons:
  • Shoulder Shield
  • 3-tube Missile Pod
  • MMP-78 120mm Machine Gun
  • MMP-80/90mm Ver.8 Machine Gun
  • 280mm Zaku Bazooka
  • 880mm Raketen Bazooka
  • Heat Hawk
  • Sturm Faust

RM126.00
img
SAVE RM43.90

MG 1/100 RGM-79C GM Type C (Standard Color)

  • GM Type C Standard Colour Type
  • Marking seal invulnerable [Fourth Platoon] or reproduce.
  • The waist can be supplied with weapons mounts.
  • Beamsaber x 1, Beam rifle x1, shield x 1
  • Item Size/Weight : 31 x 20 x 8 cm / 516g

RM105.00
img
SAVE RM71.70

MG 1/100 MS-14A Gelgoog (Gato Custom)

  • The MS-14A Gelgoog (ゲルググ,Gerugugu) was the last mass production mobile suit produced by the Principality of Zeon during the One Year War.
  • The high-performance A-Type Gelgoog was equipped with a twin-bladed beam saber (referred to as both a beam naginata due to the shape of the blades, though it was actually very different in function from the traditional Japanese weapon, as well as a "beam halberd") and a high-output beam rifle, a first for a Zeon mobile suit. The Gelgoog was a superior mobile suit in every aspect to the MS-06F Zaku II and even the new MS-09R Rick Dom.
  • Weapons:
  • Twin Beam Sword
  • Beam Rifle
  • Trial Product Beam Rifle
  • Giant Bazooka
  • Prototype Beam Rifle
  • Shield

RM137.20
img
SAVE RM69.86

RE/100 Gundam GP04 Gerbera

  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM140.00

Showing 1 - 30 of 39 products