Price Clear







Showing METAL PARTS product(s)

Showing 51 - 80 of 162 products

img
SAVERM5.85

[Metal Part] Aviation Hole 2.5mm for HG / MG Gundam model kits - 15 units

  • 2.5mm diameter aviation hole.
  • Package include 15 units of aviation hole for modelling kits customization.
  • Thickness : 1.5 mm

RM7.15
img
SAVERM22.18

[Metal Part] Zaku Metal shoulder thorn type ZC1 for HG / MG - 3 units

  • 3 units of zaku metal part shoulder throne type ZC 1.
  • Widest diameter: 9.7mm, length: 16.8mm
  • can fit with MG zaku modelling kits nicely and don't need any cement to be attach on the kit.

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C6, Red) (2 Units)

[Metal Part] Blue Metal Thruster Vents (C7)

  • Specifications: Maximum diameter 15mm, Height 12mm, Joint Diameter 2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

    1)Requires drilling works to create a joining point (2mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM15.30

[Metal Part] MG 1/100 Hi-Nu Gundam Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM88.40
img
SAVERM30.20

[Metal Part] RE 1/100 Gundam Mk III Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 2mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2mm diameter

RM3.00
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B11, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Brown Colour

  • Diameter: 5.0mm 
  • Brown colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on 1/144 or 1/100 DOM, MG Zaku

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Blue Colour

  • Diameter: 5.0mm
  • Blue colour lens
  • Thickness: 2.6mm
  • Material: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits
  • Glue required

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Gold Colour

  • Diameter: 5.0mm
  • Gold colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Green Colour

  • Diameter: 5.0mm
  • Green colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM7.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (S1, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S1)

  • Specifications : Maximum diameter 15.0mm, Height 13mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal parts are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM12.50
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S2, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S4)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (S5, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S5)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM12.70
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S6, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S6)

  • Specifications : Maximum diameter 11mm, Height 9.5mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 3.0mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 3.0mm diameter

RM3.80
img
SAVERM49.00

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

It contain 19 types of metal parts for RG 1/144 MSN-04 Sazabi Zaku II to enhance

1. Red Eye Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Shoulder Part Thruster x 3 pair
4. Hydraulic Piston x 4
5. Hand Part - 5.0 mm Flat Head Armored Screw x 4 units
6. Hand Part - 6.0 mm Flat Head Armored Screw x 4 units
7. Main Thruster x 1 Unit
8. Secondly Thruster x 1 Set
9. Side Thruster x 1 Set
10. Bottom Thruster x 1 Set
11. Aviation Hole 1.6 mm x 1 Set
12. Aviation Hole 3.0 mm x 2 units
13. 5.0 mm Flat Head Armored Screw x 2 units
14. Joining Angle Detailing Enhancement Part x 2
15. 6.0 mm Flat Head Armored Screw x 4 units
16. Leg Main Thruster x 1 Set
17. Leg Side Thruster x 3 Set
18. Flat Head Screw 2.0 mm x 1 Pack
19. Metal detailing sticker

RM99.00
img
SAVERM24.80

[TLX] Metal Build Alloy Inner Frame for RG 1/144 RX-93 Nu Gundam (TLX-01)

  • Metal Build Alloy Inner Frame for RG RX-93 Nu Gundam
  • The original RG RX-93 Nu Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast RG RX-93 Nu Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM95.00
img
SAVERM10.00

[IRON TOYS] Metal Build Alloy Inner Frame and Metal Parts for Full Mechanics FM 1/100 Gundam Aerial

Brand : Iron Toys (Tie Chuang)
  • Metal Build Alloy Inner Frame for Full Mechanics FM 1/100 Gundam Aerial
  • The connector between the calf and knee is changed from separate parts to one part.
  • The power tube at the rear of the leg is changed to a braided rope style display.
  • The original Full Mechanics FM 1/100 Gundam Aerial design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast Full Mechanics FM 1/100 Gundam Aerial model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM128.00
RM128.00 Add to cart
img
PO PriceRM105.00

[DIAN CHANG] Metal Build Alloy Inner Frame for MG Astray Red Frame

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : DEC 2022 
Estimate arrival : JAN / FEB 2023 

- Preorder Price RM105.00 
- Deposit RM10, Balance RM95.00 
- We will inform to make balance RM95.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

 ###############################################################
  • Metal Build Alloy Inner Frame for MG Astray Red Frame
  • The original MG Astray Red Frame Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Red Frame Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Request Stock
img
PO PriceRM105.00

[DIAN CHANG] Metal Build Alloy Inner Frame for MG Astray Blue Frame

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : DEC 2022 
Estimate arrival : JAN / FEB 2023 

- Preorder Price RM105.00 
- Deposit RM10, Balance RM95.00 
- We will inform to make balance RM95.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

 ###############################################################
  • Metal Build Alloy Inner Frame for MG Astray Red Frame
  • The original MG Astray Red Frame Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Red Frame Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Request Stock
img
PO PriceRM138.00

[IRON TOYS] Metal Build Alloy Inner Frame and Metal Parts for MG OVA Sinanju

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : APR 2024
Estimate arrival : MAY 2024

- P-O Price RM138.00
- Deposit RM30.00, Balance RM108.00
- We will inform to make balance RM108.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • Metal Build Alloy Inner Frame for MG Sinanju OVA
  • The original MG Sinanju design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Sinanju model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
SAVERM59.00

[Metal Part] MG 1/100 Sazabi Ver. KA. Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Backpack Main thruster - Red x1drill 2.0mm hole, attached to point with minor cement
2.Backpack Sub thruster - Red x2drill 1.5mm hole, attached to point with minor cement
3.Shoulder thruster - Red x6drill 1.5mm hole, attached to point with minor cement
4.shoulder blade (Central) nozzle x2drill 3.0mm hole, attached to point with minor cement
5.shoulder blade lateral nozzle x4drill 1.5mm hole, attached to point with minor cement
6.armor side waist vent x6drill 2.0mm hole, attached to point with minor cement
7.rear armor vents x4drill 2.0mm hole, attached to point with minor cement
8.Arm vents x4drill 2.0mm hole, attached to point with minor cement
9.Front Leg Vents x2drill 2.0mm hole, attached to point with minor cement
10.Leg Side Vents x2drill 2.0mm hole, attached to point with minor cement
11.Leg Rear Vents x6drill 2.0mm hole, attached to point with minor cement
12.Belly vents x1drill 2.0mm hole, attached to point with minor cement
13.Waist Energy Pipe x1direct
14.Metal join cover (round) x6drill 2.0mm hole, attached to point with minor cement
15.Metal aviation hole x15drill 2.0mm hole, attached to point with minor cement
16.Rear Join cover x2drill 2.0mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
Tools needed for assembling metal parts set:
  • Tweezer straight/angled
  • Modelling kits cutter
  • Metal cutter
  • Metal wire 
  • Plastic model kits cement
  • Magnifying glass

RM148.00
img
SAVERM27.50

[Metal Part] MG 1/100 Nu Gundam RX-93 Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Backpack thruster x4drill 2.0mm hole, attached to point with minor cement
2.Upper Calf thruster x2drill 1.5mm hole, attached to point with minor cement
3.Lower Calf thruster x4drill 1.5mm hole, attached to point with minor cement
4.Leg thruster x4Combined with leg thruster to extend thruster effect
5.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
6.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Metal leg joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
12.Metal Shoulder joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
13.Armor screw x30drill 2.0mm hole, attached to point with minor cement
14.Armor Aviation port x10drill 1.6mm hole, attached to point with minor cement
15.Metal beads x50drill 1mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM91.00
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Pink Colour

  • Diameter: 5.0mm
  • Pink colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S8, Silver, Red) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 11mm, Height 9.5mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80

Showing 51 - 80 of 162 products