Price Clear







Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 331 - 360 of 500 products

img
SAVERM13.80

Mr Hobby Mr. Mark Softer

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

  • First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
  • Apply decal over it.
  • Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
  • The decal will stick perfectly, even on uneven or curved surfaces.
  • If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
  • Capacity: 40ML

RM15.10
img
SAVERM11.00

Mr Hobby Mr. Mark Setter 40ML

  • Apply the mark setter to the position where decal is to be stuck.
  • Stick a slide mark
  • Spread it evenly and remove water with a swab, etc.
  • Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

RM17.90
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
img
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
img
SAVERM11.00

[Water Decal][Bandai] Mobile Suit Gundam Iron Blooded Orphans #103

[Bandai] Mobile Suit Gundam Iron Blooded Orphans Water Decal #1 (GD103)

For HGIBO / NG 1/100 Barbatos 

RM18.90
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Johnny Ridden Zaku II High Mobility Type

[Da Lin] RG Johnny Ridden Zaku II High Mobility Type Water Decal (RG21)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for Johnny Ridden Zaku II High Mobility Type 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Exia Gundam + Repair II
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 GP01 Gundam + Full Burnern

[Da Lin] RG GP01 Gundam + Full Burnern Water Decal (RG17)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG GP01 Gundam + Full Burnern 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Wing Gundam Zero Custom EW
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Tallgeese I

[Da Lin] Water Decal for RG 1/144 Tallgeese I Water Decal


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG 1/144 Tallgeese I
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gundam Strike Rouge + OOtori Equipment

[Da Lin] Water Decal for MG 1/100 Strike Rouge + Ootori Equipment

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Strike Rouge + Ootori Equipment
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 TR-6/ TR series

[Da Lin] Water Decal for MG 1/100 TR-6/ TR series


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 TR-6/ TR series
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Unicorn +MS Cage (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Unicorn +MS Cage  (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Unicorn +MS Cage (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Wing Zero EW

[Da Lin] Water Decal for MG 1/100 Wing Zero EW


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Wing Zero EW
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 OO Qan[T]

[Da Lin] Water Decal for MG 1/100 OO Q[Tan]

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 1/100 OO Q[Tan]
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Advanced GN-X

[Da Lin] Water Decal for MG 1/100 Advanced GN-X


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Advanced GN-X
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for NG 1/100 Scale Cherudim Gundam

[Da Lin] Water Decal for 1/100 Scale Cherudim Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Cherudim Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Seravee Gundam

[Da Lin] Water Decal for 1/100 Scale Seravee Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for 1/100 Scale Seravee Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Dynames Gundam

[Da Lin] Water Decal for MG 1/100 Dynames Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Dynames Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for NG 1/100 Arios Gundam

[Da Lin] Water Decal for NG 1/100 Arios Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for NG 1/100 Arios Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Altron

[Da Lin] Water Decal for MG 1/100 Altron


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Altron
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Epyon

[Da Lin] Water Decal for MG 1/100 Epyon


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Epyon
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Shenlong EW

[Da Lin] Water Decal for MG 1/100 Shenlong EW


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Shenlong EW
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 HiRM Ver Wing Zero

[Da Lin] Water Decal for MG 1/100 HiRM Ver Wing Zero


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 HiRM Ver Wing Zero
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 HiRM Ver XXXG-01W

[Da Lin] Water Decal for MG 1/100 HiRM Ver XXXG-01W


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 HiRM Ver XXXG-01W
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Gundam Strike Freedom (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM7.10

[Da Lin] Water Decal for MG/NG 1/100 Astray Gold Frame Amatsu Mina (Bronzing Color Coating)

[Da Lin] Water Decal for 1/100 Scale Astray Gold Frame Amatsu Mina (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for 1/100 Scale Astray Gold Frame Amatsu Mina (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Gold Color Coating)

[Da Lin] Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Sazabi Ver. Ka. (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM16.00
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Nu Gundam /v Gundam Ver. Ka (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Nu Gundam Ver. Ka  (Bronzing Color Coating)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 Nu Gundam Ver. Ka (Bronzing Color Coating)
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM19.90
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 GN Sword IV

[Da Lin] Water Decal for MG 1/100 GN Sword IV

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water Decal for MG 1/100 GN Sword IV
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00

Showing 331 - 360 of 500 products