Price Clear







Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 391 - 420 of 476 products

img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B5, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B5)

  • Specifications: Maximum diameter 9.5mm, Height 9.0mm, Joint Diameter 2.0mm
  • Thruster Pin : 4.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

    1)Requires drilling works to create a joining point (2.0mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM17.90

[Figure-rise Effect] Ground Effect (Purple)

- Grand effect appears in Figure-rise Effect!

- Faithfully reproduce landing scenes and battle scenes! The width of the display further expands!
- The ground parts can also be used as a foundation! If you use the clear base, you can reproduce the effect of the peeled ground floating in the air!
- A special action base is included, and the combination with the effect is free!
- The dedicated action base post is movable in three axes and can be flexibly adjusted in position.
- By further combining the attached joint parts, you can secure the scaffolding by separating the effect parts from the pedestal, stereoscopically attached to the support, a wide range of display possible!
- Also compatible with the figure-rise effect on sale!

- accessories
· Action base x 1
· Joint parts x 4
· Large strut parts x 2
- Support pole parts small x 2
· Joint parts for pedestal x 1

- Product content
· Molded product x 3
· Instruction manual x 1

RM36.00
img
SAVERM13.80

[029] HGBC 1/144 Ninpulse Beams

- Beam effect set corresponding to various Gundams appears!

- Four beam effect parts are reproduced with various sizes and shapes.
- It is also possible to link two effect parts.

- accessories
· 8 beam effect part parts x 2

RM22.10
img
SAVERM20.60

Figure-rise Effect Burst (Space Pink)

The new version of Bandai Figure-rise Effect Burst in a deep space style color!  A base and pole arms are included to give you more freedom in setting up your action scenes. 


Accessories:

- Action base
- Joint part (x4)
- Large supporting arm (x2)
- Small supporting arm (x2)
- Joint part for base

RM33.30
img
SAVERM10.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Silver)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Silver
Scale : 1/144

* Note : Gundam Barbatos is not included

RM14.00
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C3, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C4, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C5, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C5)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C8, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C8)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Silver)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Silver 

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
img
SAVERM9.20

[Metal Part] Energy Cable Tubes Pipes (L size, 5mm, Titanium Black)

5mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.40
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Titanium Black)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
img
SAVERM7.30

[Metal Part] Energy Cable Tubes Pipes (S Size, 3mm, Titanium Black)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.3 mm , 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.3 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.5 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.5 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
img
SAVERM52.00

[Metal Part] MG 1/100 MS-06J Zaku II Ver 2.0 Metal Enhancement Part Set

MG MS-06J Zaku II Ver 2.0 Enhance Metal Parts Set


It contain 10 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Backpack Thruster x 2
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg x 1
7. Aviation Hole 1.6 mm x 15
8. Aviation Hole 2.0 mm x 15
9. Metal Silver Bead Ball 1.5mm x 50
10. Flat Head Screw 2.0 mm x 30 


RM68.00
img
SAVERM52.00

[Metal Part] MG 1/100 MS-07B-3 Gouf Custom Metal Enhancement Part Set

MG MS-07B-3 Gouf Custom Enhance Metal Parts Set


This package contain 9 different metal parts for MG 1/100 MS-07B-3 Gouf Custom

1. Gouf Metallic Red Eye Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Gatling Gun Muzzle for Gouf Custom x 6 
5. Gatling Gun Bullet Chain x 1
6. Backpack Thruster x 1 
7. Leg Thruster x 2
8. Flat Head Screw 2.0 mm x 30 
9. Aviation Hole 2.0 mm x 15

RM68.00
img
SAVERM4.80

[Metal Part] 5.0mm Ribbed Shell Screw * 4 units

5.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 5.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
img
SAVERM4.80

[Metal Part] 4.0mm Ribbed Shell Screw * 4 units

4.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 4.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
img
SAVERM3.00

[Metal Part] U1 Metallic Silver Air Vents / Thruster for Gundam Kit - 4pcs

  • Easy installation
  • Widest diameter:8.5mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (4 vents)
  • MG F.A. Unicorn Gundam (4 vents)
  • MG Nu Gundam Ver KA (4 vents)

RM7.80
img
SAVERM11.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Gray)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Gray
Scale : 1/144

* Note : Gundam Barbatos is not included

RM13.00
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y1, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y1, Gold)

  • Specifications : Maximum diameter 6mm, Height 6.5mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50

Showing 391 - 420 of 476 products