Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas. The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.
Mr.Surfacer 1200 contains finer granules than Mr.Surfacer 1000. They are both used in much the same way but, due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible.
Mr Finishing Surfacer 1500 - black primer micro filler in a convenient spray can. Perfect for a quick application without the need to clean your airbrush afterwards.Covers minor scratches and surface imperfections. Dries quickly for an ultra smooth finish which once dry can be sanded and polished further if needed. Can be applied in multiple layers as needed for that perfect finish.
This surfacer has reproduced the rust-proofing color used as the base color on tanks. Base coat painting on tanks can be done in one go, so that you can start painting the exterior within a shorter time.We have made this the same number as the widely used Surfacer 1000.
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
Method of use
This product quickly dissolves paint stains on airbrushes, brushes, paint trays, spare bottles, etc. Keeping your tools clean is the best way to become a better modeler.
Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.
The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.
The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.
The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.
The Super Metallic series of hobby paints is a very new range new metallic paint, which utilises high class fine metallic particles to obtain a superior finish to other metallic paints.
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D
MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.
Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D