Its armaments include a GN hand gun, two GN beam sabers, GN shield pods, and a GN shield. Acting as a support unit for her brothers' Mobile Suits, Gundam Throne Drei can connect with Gundam Throne Eins through the included bendable wire to charge its GN mega launcher for a devastating attack!

This heavy Gundam from Gundam 00 features a large beam bazooka that be switched between single handle mode and GN Burst mode that can hook up to the massive GN Condenser in its chest. Barrel can extend revealing the powerful energy conversion device detail inside.

• The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  
• Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  
• GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  
• Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  
• Includes custom marking seals and Gundam Decals.
  
• Includes GN Code decal sheet.
  
• GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  
• stand included to hold the Drive while it's not with the Exia.
  
• Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  
• GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

- Accessory: Large-scale GN beam saber ×2 that GN buster, large-scale rifle, GN [finfangu] × 4 (Canon Inc. ordnance at the Canon Inc. mode), and is shielded.

- Accessory: 2, saber × [bi-muchakuramu], flat part of the hand (Only the right hand :), and the BA-1 type.

- Accessory: GN bazooka II and GN beam saber × 2 (one brevi 1 in length)

- Includes: Beam Saber x2 (long/short), Beam Chakram x1, Open hands with expression (left/right) x1, Closed Fist (right), BA-1 type base x1

- Able to attach the rifle in two ways. - Comes with: GN Buster Rifle, Large GN Fin Fang x4 (Cannon during Cannon mode), GN Shield, Large GN Beam Saber x2

A unit used by the Innovate Anew, it features GN saber fangs and sword that can be displayed suspended behind in mid air. A display is included.

- Accessory: 2 and 2 and 2 and special flat part of the hand × grasp person × stand beam saber

Refined Masurao used by Mr. Bushido in the second season of Gundam 00 features physical blades that can be combined, a beam chakram effect part that can be housed above the head, and Try Punisher weapon housed inside the chest and shoulders. Display stand included.

- A rifle that shields of the exclusive use and is special is attached. 

- Two basic large Gundam the 21st century of Kira Yamato & moment and F and [seiei]. Competing of dream. - The activity image color is adopted in the play, and equipment is a full set. Real SD is pursued. - Feature GN drive of [ekushia] is detachable. Clear parts are used for the head and the chest. - Marking seal that is reminiscent of MG. - The freedom Gundam : to each attack mode. To the high mat mode (high mobile empty war mode). The [kusui;faasure-ru] ordnance and the [barae-napurazuma] settling beam ordnance are developed. Accessories: [Rupusubi-muraifuru], shield, GN sword, GN shield, GN long blur id, GN short blur id, and GN beam saber and GN beam dagger

Here's a super-deformed plastic kit of the lead Mobile Suit from the second season of the "Gundam 00" anime! 00 Gundam comes sharply molded in color and will be fully poseable with polycapped joints upon completion. With parts that snap together easily, it requires no cement or paint to complete (although paint would add a more realistic appearance). Its signature weapon loadouts are included, along with a sheet of foil stickers.

GN-009 Seraphim Gundam (HG) Carried on the back of Seravee Gundam, Seraphim Gundam is now offered as a snap-fit plastic kit! Molded in color, Seraphim Gundam will be fully poseable with polycap and ball-jointed articulation upon completion, and it's also transformable into a backpack to attach to the back of Bandai's HG Seravee Gundam kit (sold separately). When in backpack mode, its torso can be slid open into Face Burst mode. Two Beam Sabers and a sheet of foil stickers are included.

Here's a superb set that not only pairs up the previously-released HG 00 Gundam with HG 0 Raiser, it also includes its most powerful weapon GN sword III with a clear pink beam effect part + CLEAR SKIN VERSION! Both kits come molded in clear skin color and 00 Gundam will be fully articulated with polycapped joints upon completion. Like its anime counterpart, 0 Raiser can dock with 00 Gundam to form 00 Raiser. Weapons include two GN sword IIs and one GN sword III that can switch to GN rifle II and GN rifle IIIs respectively, two GN beam sabers, and a shield. Foil stickers are included for detail. A black stand is also provided to assist with displaying the completed model in dynamic mid-air poses.

- The original Gundam from Gundam 00 features clear transparent parts to replicate its initial appearance to Setsuna.

Weight : 1325g

HG 1/144 Cherudim is the second Gundam to come from the 00 Second Season line up. Whilst a direct continuation of the first season line, these latest kits boast certain improvements. Head The head is constructed like most HG Gundams, with a two part helmet, a face and a v-fin. Cherudim adds in a set of extra antenna, which connect via a tab and slot to the left side of the head. Further, the sniper Gundam's trademark target scope is sculpted as detail in the centre of the V-fin. Although usually hidden by the trademark red piece, you can remove that and stick it on to the top of the head in order to display the sniper scope. It's a nicely done effort which gets the kit off well from the word go. Torso The torso has rather blocky feel, losing the more circular aesthetic of the previous season. This is partially due to Dynames' optional armour cloak instead being directly built on to Cherudim's cockpit. It's clear evolution of previous ideas and looks somewhat like the Gundam is wearing a bullet proof vest. Ideal for the team's star sniper. Backpack On the back is a fairly generic Gundam backpack, in stark contrast to the previous cones/domes. Though far from just providing thrust, it also holds Cherudim's pair of GN Pistol II's (simple 3 piece constructions with rotating handles) and the Trans-Am use holoscreen. To mount this, two roughly rectangular shapes fold out about 180, so they're surrounding the head. You then plug in a single clear piece. The detail on the holographic scope is nice and sharp but is sadly lacking any colour, so you'll need to paint it to make it show accurate. Arms The arms of the kit use one of the best innovations of the season 2 kits- new wrist articulation. Before, most Gundams basically had a simple balljoint wrist. Not bad but not really much use, especially for posing with larger weapons. Here, the balljoints are still present but connect into a slightly smaller block which extends slightly into the forearm with vertical movement. This allows for much better range and posing, especially with Cherudim's rifle. I've struggled to get Dynames into a sniping pose but the combined arm articulation allows Cherudim to easily pull this iconic pose off. For hands you get two generic weapon holding hands a spare left hand with fingers sculpted in a curved grasp. Ideal for poses craddling the rifle. Legs The legs are perhaps the oddest part of the kit, kind of reminding me of Transformers Animated rather than Gundam. The feet have long fin on the back of each, rationalised as folding down to provide support from recoil when Cherudim is firing. Obviously there's no call for that on a plastic model, but the accuracy is appreciated and they do give the kit a little extra balance. Weapons Sadly, the rifle itself is less strong. Combination and transformation is the big theme of the season 2 Gundam weapons, a direct reference to how CB are no longer an unchallenged force on the battlefield. Cherudim's rifle can be built as a traditional long rifle or fold up to make a shorter gun. The problem is that rather than create a joing to allow the rifle to fold, you have to pull the front section off, turn it upside down and slide a chunky peg into a slot in the back half. It's not the worst design choice ever, but given recent 500/600 yen SD Gundam kits can have the same gimmick on a sword, it'd be nice to see a more expensive HG kit pull off likewise. The Cherudim doesn't have any sabers, but it's folding GN Pistol II's have a blade on the underside of the barrel. These pistols can transform via a simple folding joint from pistols to close combat weapons pretty well. They fit snug into the Cherudim's hands. Shield Bits Extending from Cherudim's butt in a slightly questionable practice is the unit's GN Drive, covered by several GN Shield Bits. The Bits are the main gimmick of the kit, a more defensive variation of the GN Fangs used by Zwei and Arche. These consist of nine identical panels, which are mounted on various places across the body; 2 on the left shoulder, 1 on each knee and 6 covering the GN Drive. A transparent plastic stand is provided, allowing you to display the Bits in hovering defensive action. Some variety is possible but you're pretty much stuck with them as floating shields, not the flying mini-guns Lockon can also use them for. Still, the thought is appreciated. Overall This is a decent kit. I'll admit I probably like the basic design of Dynames more, but Cherudim is far from the worse design out there and alot of the well handled kit engineering helps smooth things over for doubters like me. I don't think this is a must have kit, but it's a strong representation of the Cherudim design. Be sure to lock it on to your shopping basket.

Machine - HG Arios Gundam response support.
Adjunct: Rifle × 2, × 1 Arios connection parts, dedicated base

- Earth Federation appeared in color!

P-Bandai Online Hobby Shop Exclusive: RG 1/144 GN-001 Gundam Exia (Trans Am Mode) Gloss Injection Ver.

[Daban] 1/100 00 Gundam Seven Sword/G (MG)

• Line up the first series of RG from the Mobile Suit Gundam 00, Gundam Exia appearance!
  
  
• Is a real grade latest series, it's the 15th of his will, was on the stage of AD
  
  It is Gundam Exia that appeared in the Mobile Suit Gundam 00. In other words, Gundam Exia is present in the world of Jitsuzuki and [AD] the world we live, on the extension of the current science, The aircraft is present. Different from the other Gundam, in the sense of the original in [the real world it is a mobile suit], it is also the concept of the real grade. We sees The go Himotoi from the latest science in the real world of science in 2300 that can not be, Gundam to cross over the present and future of [science] and future, present and [AD], It is so [RG GN-001 Gundam Exia].
  
  
• 1 Point: the pursuit of appearance and a movable mechanism realistic
  It has been omit was included in only Exia that specializes in dogfight, the Gundam of other,
  To the Advanced MS joint mobility configuration "for realizing the movable range similar to a human]
  Equipped. As a result, achieve a range of motion unparalleled among the RG series so far, and a human body basis
  I can enjoy the movement.
  
  
• 2 Point: detail of as a product of the real world of 00 was the stage for the future of the 2300's year of Jitsuzuki and the world we live. Of Exia There should be an extension of energy science is the current design features [GN Drive. The state-of-the-art technology for transmitting light energy to transfer the energy [GN code] Interpreted as material that has evolved from the plasma tube array], from the plasma tube array 
  Texture to the image, you have to pursue the details.
  
  
• GN Drive is removable.
  
  
• GN condenser realistic by the clear parts and decals. GN particle supply code
  
  
• Reproduced by the hologram PET.
  
  
• Ebi himself, who was in charge of the mechanic design of Gundam Exia is thorough supervision. A new Marking the design.
  
  
• Shield and sword comes, seven were derived from development code of the Seven Swords.
  
  
• Accessories: GN Sword, GN shield, GN beam saber x 2, GN beam dagger x 2, GN Short Blade, GN Long Blade

[Daban] 1/100 Gundam 00 Raiser (MG)

REISSUE ITEM

Release date : Dec, 2017

Estimate delivery : Jan, 2017

From "MOBILE SUIT GUNDAM 00", GUNDAM EXIA REPAIR II is here in Master Grade!!

Body shape and new weapons all faithfully replicated in brand new design! Colors from setting recreated by molded color

The new weapon, GN Sword Kai replicated in new design

The destructive GN Sword Kai newly changed along with GUNDAM EXIA REPAIR II is included with brand new design. The signature edge part of the beam sword uses clear material to show the sharpness and beauty from the show. The folding system of the sword is recreated, along with gimmicks to set on the arm or expand its shape.

　

Characteristics of the Mobile Suit faithfully replicated.

The surface parts of "REPAIR II" is faithfully replicated in new design based on "MG GUNDAM EXIA"

New thruster nozzles added to the shoulder armor, back armor, and the back of the calves, changing its shape. Other details, such as the codes on the arms and legs are switched to inner-armor type so changed the surface armor parts of the same places, are fully supervised to recreate REPAIR II.

　

Various option parts

Water transfer decal stickers for more detailed marking and weapons

GUNDAM EXIA has used are included as kit value to expand the possibility of posing.

　

Weapons: GN Sword Kai x 1 / GN Beam Saber x 2 / Shield (GN Long Blade x1 / GN Short Blade x1 / GN Beam Dagger x 2)