• Home
  • Showing WATER DECALS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing WATER DECALS product(s)

Showing 1 - 30 of 70 products

Quick View
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
RM18.80 Add to cart
Quick View
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM15.08

HG 1/144 STRIKE FREEDOM Metal Effect Water Decal

- Water Decal for HG 1/144 Strike Freedom Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 10 cm x 9 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM14.90
RM14.90 Add to cart
Quick View
img
SAVERM8.90

Water Decal MG 1/144 Gundam Seed Blitz Gundam

- Water Decal for Water Decal MG 1/144 Gundam Seed Blitz Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal RG/ HG 1/144 00 QAN[T] Gundam

- Water Decal for RG/ HG 00 QAN[T] OO?Qan[T] 
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM19.90

Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam

- Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam Water Decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 15 cm x 20 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #47 Gundam OO Multiuse 2 [MS AEU Enact Union Flag Tieren Space Ground commander Taozi Type]

Water Decal 47 For HG Gundam 00 Series Set 2 [MS AEU Enact Union Flag Tieren Space Ground commander Taozi Type] 1/144 HG Gundam Bandai Multi Use Decals Multiuse

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #127 Mobile Suit Gundam OO The Movie Multiuse 1

These are high-quality & detailed waterslide decals to add custom realistic markings for your gundam models. 
Each sheet measures at 19cm x 11cm .
Water Decal include Gundam 00 Qan[t], Gundam Zabanya, dan Brave

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #46 Gundam OO Multiuse 1 (Celestial Being SR)

The term Gunpla refers to the mecha models, characters or plastic vehicles from the Japanese Gundam franchise and marketed by Bandai; it results from the contraction of "Gundam plastic model". Appeared in 1980.


THE GUNPLA PHILOSOPHY: THE MODEL FOR EVERYONE! "without glue or paint

All Gundam models are characterized by two essential properties: 

- the parts are nestable 

- and they're molded in color. 


Gunpla are classified by ranges (called "grade") according to their quality and/or size. The main ones are :

- NG No Grade (1980), although the term only appears much later, it refers retrospectively to the first models released as early as 1980.

- HG High Grade (1990), first range of higher quality at a scale of 1/144.

- MG Master Grade (1995), of higher quality than HG High Grade with, for example, the internal mechanics fully modeled at a scale of 1/100.

- PG Perfect Grade (1998), the most technically advanced range at a scale of 1/60.

- FG First Grade (1999), the inexpensive clip-on range.

- HGUC High Grade Universal Century (1999), a popular re-edition of the Universal Century robots.

- EX-model (2001), range dedicated not to robots but to vehicles and related flying machines.

- MS Mega Size (2009), 1/48 scale range.

- RG Real Grade (2010), similar to the MG Master Grade with a pushed internal skeleton but at a size called 1/144 like the "HG High Grade".

- RE/100 Reborn One Hundred (2014), new range of 1/100 scale gunplays.

- Super Deformed Gundam or SD Gundam is a Japanese animation franchise whose works are parodies of the Gundam saga, adopting the graphic codes of the super deformed. 

 

However, the exhaustive classification is much more complex, since it depends on the scale (from 1/550 to 1/35), improvements (the master grade range exists in versions 1.5, 2.0 and 3.0) and special events (a Ver.G 30th range was released for the thirtieth anniversary of the franchise for example.

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for RE / 100 Gundam Guncannon Detector

[Da Lin] Water Decal for RE / 100 Gundam Guncannon Detector

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RE / 100 Gundam Guncannon Detector
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for RE / 100 Gundam GP04G Gerbera

[Da Lin] Water Decal RE / 100 Gundam GP04G Gerbera

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RE / 100 Gundam GP04G Gerbera
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.00

[VT] Water Decal for Gundam Machine Nest Domain Base - S Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Small Size

RM8.00
RM8.00 Add to cart
Quick View
img
SAVERM14.00

[VT] Water Decal for Gundam Machine Nest Domain Base - L Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Large Size

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM13.90

Bandai Water Decal for Macross Frontier HG 1/100 YF-29 Durandal Valkyrie (for the Maximilian Genus Custom Full Set Pack)

This is a sheet of water-slide decals, dry transfers, or self-adhesive stickers for use in detailing anime or science-fiction kits.

This set of decals was made especially for Bandai's 1/100 HG YF-29 Durandal Valkyrie (Maximilian Genus Custom) Full Set Pack model kit! Decals are included for all three forms: Battroid, Gerwalk and Fighter. Order yours today!

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM6.10

[Water Decal][Bandai] Gundam Decal RG 1/144 RX-78-2 Gundam #84

[Bandai] Water Decal for RG 1/144 RX-78-2 Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RG 1/144 RX-78-2
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM3.00

[Amex] Fluorescent Water Decal for MR Model (MJH) HIRM alike 1/100 Gundam Astray Noir

[Amex] Fluorescent  Water Decal for MR Model (MJH) HIRM alike 1/100 Gundam Astray Noir

This is a High Quality Fluorescent  Water Decal by AMAX and it is not a sticker. 

- Special design for HIRM alike 1/100 Gundam Astray Noir
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.90
RM16.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal Maintenance Racks, Hangars, Warning Stripes, Universal Water Decal

[Da Lin] Maintenance Racks, Hangars, Warning Stripes, Universal Water Decal

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use B

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use B

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit Gundam Machine Nest Domain Base Universe Use B
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use A

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use A

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit Gundam Machine Nest Domain Base Universe Use A
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for RG 1/144 RX-78-2 Ver.2.0 Gundam

[Da Lin] Water Decal for RG 1/144 RX-78-2 Ver.2.0 Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RG 1/144 RX-78-2 Ver.2.0 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for SDCS Gundam Cross Silhouette Calibarn Gundam

[Da Lin] Water Decal for SDCS Gundam Cross Silhouette Calibarn Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit SDCS Gundam Cross Silhouette Calibarn Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #128 Mobile Suit Gundam OO The Movie Multiuse 2

\"Gundam Decal\" new lineup! Introducing water transfer decals that can be used on 1/144 scale!
Highly versatile water transfer decal.
Decals compatible with Harute Raphael Jinx IV are included.

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG / 144 Infinite Justice Gundam Type II

[Da Lin] Water Decal for HG / 144 Infinite Justice Gundam Type II 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG / 144 Infinite Justice Gundam Type II 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Raider Gundam

[Da Lin] Water Decal for HG 1/144 Raider Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Raider Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Providence Gundam

[Da Lin] Water Decal for HG 1/144 Providence Gundam 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Providence Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei

[Da Lin] Water Decal for HG 1/144 Gundam Throne Zwei 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Gundam Throne Zwei 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart

Showing 1 - 30 of 70 products