• Home
  • Showing MS GUNDAM 00 product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing MS GUNDAM 00 product(s)

img MS GUNDAM 00

Showing 121 - 150 of 192 products

Quick View
img
SAVERM70.90

Gundam Avalanche Exia

Gundam Avalanche Exia made its debut in the "Mobile Suit Gundam 00V" side story serialized in Hobby Japan magazine, and fans can now build the powerful mech with this sharp snap-fit model kit from Bandai! Molded in color and carefully detailed after mecha designer Kanetake Ebikawa's drawings, the Mobile Suit is equipped with its high-mobility hs-A01 Avalanche along with its Seven Sword System. Its armament includes a GN Sword capable of switching into rifle mode, two GN beam daggers, two GN beam sabers, a GN long blade, and a GN short blade. The mech features sharp mechanical detailing throughout, and will be fully articulated with polycap joints upon completion. Foil stickers and marking stickers are included. Weight: 650g


Wikipedia information about Gundam Avalanche Exia 
GN-001/hs-A01 Gundam Avalanche Exia (aka Gundam Avalanche Exia, Avalanche Exia, Exia), is a variant of GN-001 Gundam Exia, suited with the Avalanche armor in the side-story Mobile Suit Gundam 00V.

Although the GN particle propulsion system native to the Exia allows for relatively high speed and acceleration, the unit is actually incapable of matching or exceeding certain aircrafts and spacecrafts in flight. To eliminate this issue, the high mobility equipment hs-A01 Avalanche was created. The optional equipment consists of a series of large-capacity GN particle condenser attachments, which act to store the particle production of the GN Drive for release in a single 10-minute burst of ultra-high speed. Higher output is possible, but the strain it places on the body of the pilot becomes severe. As the condensers require a full hour to charge, repeated use of the burst function is impossible. The standard Seven Swords armaments can be mounted behind the Avalanche equipment and can be quickly deployed for use.

Taken from Robert Spacey's narrative on GN-001/hs-A01 Gundam Avalanche Exia first encounter in Gundam 00V. As a young historiographer, I had the opportunity to accompany a UN inspection of the Union Army. At that time the Union military was faced with the problem of increasing its armed presence in South America and I went there to collect data out of purely scientific interest. It was then that it appeared. I was engaged in a conversation with the inspection team's pilot Deborah Galiena, when an alarm sounded at the base. Right after that, Gundam Avalanche Exia appeared in the sky. The Union army immediately launched a squadron of SVMS-01 Union Flag. However, the Flags weren't superior to the Avalanche Exia in aerial maneuverability, and were torn apart by the Avalanche Exia. The battle was over very quickly.

Weapons
  • GN Beam Saber-The beam saber is a hilt with the ability to activate beam blade by generating a positron field filled with GN Particles.While they are generally stronger than GN solid blades, one disadvantage is their performance varies depending on the surrounding atmospheric conditions.
  • GN Beam Dagger-Possesses the same power output as the beam saber but was designed to generate a smaller and more concentrated beam that is harder to diffuse. Setsuna has made a habit of throwing them while in combat. This weapon type became obsolete in the future as the ability to manipulate beam saber length blades was achieved. Mounted on the back of the shoulders. The beam saber is a hilt with the ability to activate beam blade by generating a positron field filled with GN Particles. While they are generally stronger than GN solid blades, one disadvantage is their performance varies depending on the surrounding atmospheric conditions.
  • GN Blades-Named as GN Long Blade and GN Short Blade respectively. These are Exia's customized solid swords that differ in size from the main GN Sword and took the longest time in Exia's arsenal to develop. Because the GN Sword has difficulty doing damage without a certain amount of swing and space due to it's size, these were designed in order to give the Exia solid blades that can be used in a variety of situations that the GN Sword has difficulty with. It possess the ability to cut through 2 meters of conventional E-Carbon armor.
  • GN Shield-A shield mounted on Exia's left arm. It possesses an "expansion" mode where the left and right blue sections move outwards and increase the defense area the shield covers, but the drawbacks of this mode are increased particle consumption as well as a decrease in the overall defense property of the shield due to the increased area that GN Field element covers.
  • GN Sword-A solid GN blade attached to a miniature forearm shield, which serves as the Exia's primary weapon, and the largest blade amongst the Seven Swords. It works by applying a GN Field over the solid sword which greatly increases the sharpness and cutting power. The blade can be vertically folded along the forearm, exposing the muzzle of a beam rifle.
  • GN Vulcan-These weapons are smaller cousins to the GN Beam weapon. Typically locations include head and wrist mounted system, both ensuring a wide field of fire. Purely secondary weapons, they are used to engage soft targets, and in a defensive capacity. Their anti-mobile suit capability is virtually nil, especially against another GN powered unit. While there is no meaningful chance of penetrating another mobile suits armor, there is always a chance that a lucky round could damage joints or sensors. They can also be used in a "spray and pray" fashion once an enemy's armor has been breached, exposing their tender innards. So despite their low power, GN Vulcans can still be a threat no experienced pilot would ignore. While low damage potential limits their offensive utility, the trade off is a high rate of fire. This is very useful when engaging small, fast, maneuverable targets such as GN Fangs and missiles.

RM121.00
RM121.00 Request Stock
Quick View
img
SAVERM22.90

[061] HG 1/144 00 Gundam Seven Sword/G

  • Bandai's High Grade Universal Century kit line continues to get better and better and nowhere is this in evidence more than on the latest kit, the 00 Gundam Seven Sword/G. 
  • Molded in color with clear parts and marking stickers. As always, plenty of poly-caps are used to ensure a great amount of articulation. 
  • Weapons include GN Sword II Blaster, GN Buster Sword II (assembles in shield and sword mode), GN Katar, GN Sword II Long (assembles in rifle and sword mode), GN Sword II Short, and GN Beam Saber. Weight: 330g

RM66.00
RM66.00 Request Stock
Quick View
img
SAVERM48.29

GNY-001 Gundam Astraea

Weapons include GN beam rifle, GN beam sabers, shield, prototype GN sword, and GN launcher. Includes new features such as shoulder joints that can extend outward, allowing dramatic poses as seen in the animated series. Waist features axial cover parts for recreating off-center poses. Weight:524g

RM119.60
RM119.60 Request Stock
Quick View
img
SAVERM33.90

[067] HG 1/144 Gundam Zabanya

Accessories includes beam rifle and comes with a pistol shape and 2 sets bits. At least ten GN Rifle Bit IIs are stored within the GN Holster Bits, mounted on Zabanya's rear thruster block. Weapons-wise, GN Micro-Missiles are laced throughout its armor and the GN Holster Bits contain GN Rifle Bits within them. Expected to arrive on middle September, 2010

RM74.00
RM74.00 Request Stock
Quick View
img
SAVERM127.90

MG 1/100 GN-001 Gundam Exia (Trans-am Mode)

  • Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  • The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  • It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
  • Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
  • Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  • Weight:696g.

RM220.00
RM220.00 Request Stock
Quick View
img
SAVERM24.20

[070]00 HG 1/144 Gundam 00 Raiser (GN Condenser Type)

  • Gundam 00 Raiser condenser mode made its appearance! 
  • Active character in the early 00 movies. 
  • Accessories: 
  • GN Sword II × 2, 
  • GN Sword III, 
  • shield, 
  • pedestal

RM95.70
RM95.70 Request Stock
Quick View
img
SAVERM39.90

[054] HG 1/144 Gundam 00 Raiser + GN Sword III

  • Raiser + GN Sword III of the final battle specification is the product of a normal color!
  • Effects are clear parts. GN Sword II also included of course.
  • Sword mode rifle mode can be converted to GN Sword III.
  • Effects blade part of GN Sword III also reproduced in clear plastic.
  • Accessories: GN Sword III x 1, GN Sword II x 2, GN beam saber x 2, GN shield x 1

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM99.90

1/100 Gundam 00 Raiser Designer Color Ver.

This item is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.  

Not just a recolor of the 2008 1/100 GN-0000 + GNR-010 00 Raiser Special Set, this excellent release offers a third light-up LED for the Mobile Suit's head, a brand new weapon, and all parts come molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of 00 Raiser!

Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode! Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser!

A sheet of foil stickers and a sheet of designer's marking stickers are provided.

Three LED button light are included without batteries.

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM113.80

GN-0000 + GNR-010 Gundam 00 Raiser (00 Gundam+0 Raiser Set)

Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

RM186.00
RM186.00 Request Stock
Quick View
img
SAVERM10.70

FG 1/144 Gundam Virtue

Copyright Sotsu Agency / Sunrize Item Size/Weight : 20.4 x 15 x 5.5 cm / 170g

RM28.20
RM28.20 Request Stock
Quick View
img
SAVERM79.00

1/100 GN-004 Gundam Virtue

Armors can be taken off to express NADLEE version. GN cannon on the shoulders can be slided to recreate battle mode. NADLEE's hair can be moved to express movement. GN bazooka in two modes (normal and battle mode). Double joint system in arm articulations. Waist supported with axis cover parts for balanced posing. Various wrists and foil stickers included.

RM160.00
RM160.00 Request Stock
Quick View
img
SAVERM31.90

[034] HG 1/144 Gundam Virtue (Trans-am mode)

Here -  is the HG series kit of the Gundam Virtue in Trans-Am Mode, as seen in the first season of Mobile Suit Gundam 00. The GN cannon barrel can extend, and the connector arm is posable, allowing for dramatic shooting poses from the show. The GN cannon and leg unit sides slide to open into GN field mode. GN bazooka barrel can slide to replicate burst mode. Foil stickers are printed in appropriate colors for Trans-Am mode as well.

RM58.00
RM58.00 Request Stock
Quick View
img
SAVERM23.00

MG 1/100 GNX-603T GN-X

  • Characteristic GN Drive is accurately recreated! 
  • Whole body specially designed to accommodate the GN-X’s unorthodox frame while keeping the MG range of motion and stability! 
  • Cockpit hatch opens, and cockpit interior is detailed, and figures for both Peries and Sergei are included! 
  • Following in the wake of the extremely successful Gundam Exia, the updated frame features the characteristic hex binder, and is built to allow maximum mobility! 
  • Accessories: GN Beam Rifle, GN Beam Rifle Long Equipment, GN Beam Saber, GN Shield

RM145.00
RM145.00 Request Stock
Quick View
img
SAVERM29.90

[066] HG 1/144 Gundam 00 Qan[T]

  • The main machine, 00 QAN[T], decided for release before the release of the movie! 
  • The Bit Gimmick completely reproduced: The tip of Bit Blade has been formed with clear green. With the bit able to split, the battle scene from the promotion video can be reproduced! 
  • Includes the 00 QAN[T] custom GN Sword. The mode change has also been recreated. 
  • Clear parts have been used for the eyes, head, ears, and lens parts. 
  • The bits can be detached. The binder part is mobile. 
  • The swing action mechanism has continually been used, for obtaining a wide range of poseable area. 
  • The Bits blade tip has been made with AFX material, with safety in mind. - Accessories: Bit, GN Sword Item Size/Weight : 302g

RM66.00
RM66.00 Request Stock
Quick View
img
SAVERM31.90

[068] HG 1/144 Gundam Harute

- 1 / 144 the size amazing transformation! Gandam Harute! - Reproduce the form of the transformation gimmick detachable rifle. - MS-time form, reproducing moving back binder. - Detachable backpack. Each movement in the base. - Accessories: Rifles × 2, Backpack. Item Size/Weight : 31 x 19.1 x 7.8 cm / 387g

RM76.00
RM76.00 Request Stock
Quick View
img
SAVERM35.90

[012] HG 1/144 GNW-002 Gundam Throne Zwei

  • Weapons include a GN buster sword, GN hand gun attached to its left arm, and GN fangs (non-deployable). 
  • A sheet of foil stickers is included for detail. 
  • Not a drop of glue or paint required, although painting it would add a more realistic appearance.

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM19.90

[002] HG 1/144 Union Flag Mass Production Type

  • This simple HG kit of mobile suit Union Flag from "Gundam 00" will be fully articulated and can switch between MS Mode and Flight Position upon completion, with plenty of joints to allow for recreating its various signature action poses. Weapons include a linear rifle, sonic blade (plasma sword), and a defense rod. A sheet of foil stickers is included for detail.
  • Item Size/Weight : 29.7 x 19 x 5.3 cm / 234g

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM108.90

HG 1/144 GN Arms Type E + Gundam Exia

  • action base included
The GN Arms is a limited-produced series and the successors to the GNR-000 GN Sefer series. Only two units were created and both of them were modified to reflect the combat themes of their respective assigned Gundams; GN Arms Type-E is fitted to complement GN-001 Gundam Exia. Although fitted after Gundam Exia, GN Arms E retains similarities to its counterpart and its components are one part of an overall tactical support system.

For weapons, the GN Arms was designed to utilize different weaponry between its fighter and mobile armor (MA) form. Although armed with a specialized silhouette, it has limitations depending on its form. The units are armed with two sets of weaponry: standard and customized.

The standard weaponry is featured in both units; both are armed with a pair of Large-Size GN Cannons and GN Claws. The cannons are hidden at the top-rear hatch, right on top of the thrusters. The top hatch provides protective shielding for the cannons as it is the most powerful (comparable to Gundam Virtue’s GN Bazooka) and vulnerable (its destruction can destroy the entire craft) in combat. The GN Claws is a three-pronged weapon inherited from the Gundam Avalanche Exia Dash armor system. It is a melee-type weapon, meant for close range bird-of-prey style attacks. However, the original GN Claws was built with beam sabers for extended reach and had greater attack capabilities against its enemy target(s); CB engineers (for some unknown reasons) removed that ability, limiting these particular GN Claws for mainly latching and tearing against its target(s). The claws are located at the underbelly of the GN Arms; they’re folded within the lower platform until deployed. However, while its standard weaponry makes it formidable, it is its specialized weaponry that gives the GN Arms its unique combative qualities.

GN Arms E's customized equipment are its pair of Large-Size GN Swords and the GN Guns. The swords are larger versions of Exia’s swords; they’re GN particle-laced vibro-swords designed to cut through large targets (ex: mobile armors, spaceships, asteroids, etc). However, they’re specifically designed to puncture through GN Fields in case their enemy(s) managed to acquire GN technology. Designed after Exia's primary weapon, the GN Guns are built behind the sword. Although called guns, their firepower is comparable to Dynames' GN Rifle. The overall weapons silhouette gives the pair of gun-swords a focus in close-quarters combat (CQC), but balanced for mid-to-short range firing solutions.

In terms of systems, the GN Arms is powered by GN particles. The units are built with GN Condensers to store a limited supply of particles; its pilot must be mindful of its particle reserves or risk a power-down in a compromising tactical position. However, the units are designed with a docking system that connects their respective Gundams’ GN Drive to help recharge their particles for extended operation usage. Celestial Being engineers also installed a GN Field for added protection against enemy attacks. While not built into the GN Arms, either units can utilize the Trans-Am System through their Gundams during emergency situations to temporarily enhance three times their normal combat capabilities. However, its overall systems risk reduction in performance after all its particles are expended.

For combat, its native form is a fighter: GN Arms Mode. Able to fly in outer-space and Earth’s atmosphere, it can only utilize the GN Guns and Large-Size GN Cannons for high-speed heavy assault combat; it relies on its speed to flank and shoot down its target(s), similar to traditional aerial dog fighting. Unfortunately, its remaining weapons and abilities are offline in this form and its weapons are locked in place, lacking flexibility and dynamic firing solutions. As fixed weapons, they are limited to shooting down its target relative to the body positioning of the unit itself. While the units can deploy a GN Field, it was never used in this form; it suggests GN Arms either can't deploy its GN Field or has limited usage in its fighter form. Another weakness are the units' limitations in traveling between Earth and space; to compensate for those weaknesses, the Assault Container can be deployed to for enhanced tactical operations.

Celestial Being engineers realized the GN Arms have limitations exiting Earth’s atmosphere and its overall mass is too great to fit into a linear train for a ride back into space. While not designed for the sole purpose of being an atmospheric shuttle, the Assault Container (AC) is a heavily armed tactical mini-MS carrier that can safely house Exia and GN Arms through some of the most treacherous conditions; the GN Arms bears little involvement in operations when docked.

When combined with the AC, the GN Arms’ overall systems are not utilized other than its thrusters (providing additional thrust power to account for its added weight into the AC). Its overall body is safely shielded within the confines of the AC along with its respective Gundam (although they’re not docked together in any special configuration). Combined with the Gundam and powered by its GN Drive, the pilot of the GN Arms is transferred through a special lift and ported over the AC's helm for manning its flight controls and weapons; the AC is in complete control and the GN Arms is just along for the ride. However, should the container become compromised, the pilot can immediately transfer back into the GN Arms and eject Exia to escape and can recombine as a MA for advanced combat.

When transforming into GN Armor, the pilot expands the unit into a large exo-suit combat system. The GN Arms opens in such a way that Exia simply "falls" its back onto the GN Armor, lock in place, and utilize its systems in a matter of seconds. The cockpit folds up and rotates to the rear of its frame. The mid-section expands and exposes a special docking module that docks directly with Exia's GN Drive Cone. The lower modules fold out to reveal its GN Claws and foot platform to dock with Exia's legs. Its fixed weapons are now unlocked and widened for Exia's arms to dock and utilizing it as an extension of its arms.

In GN Armor combat, the armor is co-piloted by Lasse and Setsuna; the full aspects over its controls are not fully defined and its capabilities is based on observation. In battle, Setsuna has full control over Exia while Lasse seems to handle mainly propulsion and the MA's cannons during combat. Setsuna's influence over the MA seems to be limited to its control over the armor's GN Guns, Large-Size GN Swords, and the GN Claws; he relies on Lasse for evasive maneuvers, firing the cannons, and deploying its GN Field against enemy fire. Should the the GN Arms becomes critically damaged, Exia can simply pull itself out of the MA and resort to MS combat.

Overall, the GN Arms units had proven their value in combat, however, it would be the last of its kind. While Celestial Being engineers continued to produce new support units in its GNR series, Celestial Being ceased creating of any kind of mobile armor. Instead, Celestial Being engineers focused on developing equipment to enhance the combat capabilities of their Gundams; it eliminates the need for mobile armors since their individual capabilities can surpass them. However, the combat and technical data of the GN Arms was used to help CBS-74 Ptolemaios 2, a multi-purpose warship that supplements and succeeds the GN Arms as the Gundams' most powerful combat support unit.

RM220.00
RM220.00 Request Stock
Quick View
img
SAVERM33.90

[062] HG 1/144 Gundam Astraea Type-F

  • Gaiden Official MS, Astraea Type F of the new armed goods! 
  • New settings, including militants, HG reproduced as heavily armed militants were used to scale! 
  • Basic protocol as Astraea armed GN sword, shield, GN Launcher 
  • GN beam rifle comes. 
  • Add new armament: GN missile Hand, GN pistol, bazooka for jinx 
  • New configuration: GN hammer ([thorn] GN reproduce the clear green parts of the jet of particles. Comes with a wire during injection can represent a hammer.) 
  • Type F2 also available to the Assembly in the selection formula. 
  • Accessories: proto GN sword, GN launcher, shield, GN beam rifle, GN missiles hand 
  • GN beam saber × 2, GN pistol (with holster) × 2, bazooka jinx

RM74.00
RM74.00 Request Stock
Quick View
img
SAVERM48.50

1/100 SVMS-010 OVER FLAG

The elite Over Flag variable Mobile Suit from "Gundam 00" model kit is here in 1/100 scale! Molded in color, the black Over Flag will be fully articulated upon completion thanks to pollycapped joints, and can also switch between its MS Mode and Flight Position. Weapons include a new type linear rifle, two sonic blades, two plasma swords, and a defense rod. Sharp mechanical detail can be seen on the linear rifle, thrusters, landing wheels, and wing flaps. A sheet of foil stickers and a sheet of Over Flag team marking stickers are provided. Three in-scale figures are included, molded in white: Graham Aker in a pilot suit and two Union ground crew members.

  • An exquisitely designed model of the “Over Flag” in 1/100 scale!
  • The sharp appearance is designed to evoke the image of a fighter jet when transformed.
  • Translucent plastic is used for the facemask, and includes molded sensor unit detail.
  • Features accurate interior details such as jet turbines.
  • Weapons include a linear rifle and plasma cutters (x2), and the hilts of the plasma cutters can be stored in the forearms, just like the animation.
  • Includes 1/100 scale pilot, maintenance, and runway guide person figures.

RM83.40
RM83.40 Request Stock
Quick View
img
SAVERM29.90

[033] HG 1/144 Kyrios Gundam Trans-Am Mode

GN-003 Gundam Kyrios Trans-Am Mode
Item Size/Weight : 31 x 19 x 7.2 cm / 337g

Gundam Kyrios from the first season of "Mobile Suit Gundam 00" makes a return flight back to Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Kyrios but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and can switch between MS Mode and Flight Position. Weapons include a GN beam submachine gun and a GN shield that can be converted into a claw.

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM31.90

[043] HG 1/144 Arche Gundam

An antagonist Gundam from the second season of Gundam 00 with a large GN Buster Sword that also doubles as a massive rifle. Head and backpack unit can detach as an escape just like in the show. GN Condensors on body are replicated through translucent plastic.
  • Accessories: GN Sword x— 1, GN shield x— 1, GN beam saber x— 2

RM64.00
RM64.00 Request Stock
Quick View
img
SAVERM21.70

[017] HG 1/144 Al-Saachez`s AEU Enact Custom Agrissa Type

Here's a sharp snap-fit plastic kit of Ali Al-Saachez's AEU Enact Custom Agrissa Type variable Mobile Suit that will be fully transformable upon completion! Capable of switching between MS Mode and Flight Position, this color-molded kit is packed with a blade rifle with slide-out blade, a defense rod that can be attached to either side of its arm, a sonic blade (plasma sword), and a missile launcher.

RM38.20
RM38.20 Request Stock
Quick View
img
SAVERM21.70

[020] HG 1/144 Al-Saachez`s AEU Enact Custom

RM38.20
RM38.20 Request Stock
Quick View
img
SAVERM21.70

[019] HG 1/144 AEU Enact Demonstration Color

RM38.20
RM38.20 Request Stock
Quick View
img
SAVERM30.60

[030] HG 1/144 Gadessa

A mobile suit used by Innovades, the Gadessa features a long range Mega Launcher cannon weapon that can unfold like in the Gundam 00 TV series second season. A display stand is included.

RM58.30
RM58.30 Request Stock
Quick View
img
SAVERM23.90

[018] HG 1/144 GN-X

A high grade of the mass produced Gundams in Gundam 00. Features GN beam rifle with interchangeable barrel for long range type, beam sabers and arm mounted shield.

RM48.00
RM48.00 Request Stock
Quick View
img
SAVERM23.60

[023] HG 1/144 GN-X III A-Laws Type

Action base is not included.


A refined GN-X, this unit features a new lance like weapon that can act as both a gun and melee weapon. GN pistol and GN beam sabers also included.

RM48.30
RM48.30 Request Stock
Quick View
img
SAVERM23.90

[036] HG 1/144 GN-X III (ESF Type)

- Earth Federation appeared in color!


A refined GN-X, this unit features a new lance like weapon that can act as both a gun and melee weapon. GN pistol and GN beam sabers also included.

RM48.00
RM48.00 Request Stock
Quick View
img
SAVERM72.96

1/100 GN-008 Seravee Gundam

1/100 GN-008 Seravee Gundam

RM142.90
RM142.90 Request Stock

Showing 121 - 150 of 192 products