Price Clear







Showing MS GUNDAM 00 product(s)

Showing 31 - 60 of 195 products

img
SAVERM26.50

[024] HG 1/144 Cherudim Gundam

HG 1/144 Cherudim is the second Gundam to come from the 00 Second Season line up. Whilst a direct continuation of the first season line, these latest kits boast certain improvements. Head The head is constructed like most HG Gundams, with a two part helmet, a face and a v-fin. Cherudim adds in a set of extra antenna, which connect via a tab and slot to the left side of the head. Further, the sniper Gundam's trademark target scope is sculpted as detail in the centre of the V-fin. Although usually hidden by the trademark red piece, you can remove that and stick it on to the top of the head in order to display the sniper scope. It's a nicely done effort which gets the kit off well from the word go. Torso The torso has rather blocky feel, losing the more circular aesthetic of the previous season. This is partially due to Dynames' optional armour cloak instead being directly built on to Cherudim's cockpit. It's clear evolution of previous ideas and looks somewhat like the Gundam is wearing a bullet proof vest. Ideal for the team's star sniper. Backpack On the back is a fairly generic Gundam backpack, in stark contrast to the previous cones/domes. Though far from just providing thrust, it also holds Cherudim's pair of GN Pistol II's (simple 3 piece constructions with rotating handles) and the Trans-Am use holoscreen. To mount this, two roughly rectangular shapes fold out about 180, so they're surrounding the head. You then plug in a single clear piece. The detail on the holographic scope is nice and sharp but is sadly lacking any colour, so you'll need to paint it to make it show accurate. Arms The arms of the kit use one of the best innovations of the season 2 kits- new wrist articulation. Before, most Gundams basically had a simple balljoint wrist. Not bad but not really much use, especially for posing with larger weapons. Here, the balljoints are still present but connect into a slightly smaller block which extends slightly into the forearm with vertical movement. This allows for much better range and posing, especially with Cherudim's rifle. I've struggled to get Dynames into a sniping pose but the combined arm articulation allows Cherudim to easily pull this iconic pose off. For hands you get two generic weapon holding hands a spare left hand with fingers sculpted in a curved grasp. Ideal for poses craddling the rifle. Legs The legs are perhaps the oddest part of the kit, kind of reminding me of Transformers Animated rather than Gundam. The feet have long fin on the back of each, rationalised as folding down to provide support from recoil when Cherudim is firing. Obviously there's no call for that on a plastic model, but the accuracy is appreciated and they do give the kit a little extra balance. Weapons Sadly, the rifle itself is less strong. Combination and transformation is the big theme of the season 2 Gundam weapons, a direct reference to how CB are no longer an unchallenged force on the battlefield. Cherudim's rifle can be built as a traditional long rifle or fold up to make a shorter gun. The problem is that rather than create a joing to allow the rifle to fold, you have to pull the front section off, turn it upside down and slide a chunky peg into a slot in the back half. It's not the worst design choice ever, but given recent 500/600 yen SD Gundam kits can have the same gimmick on a sword, it'd be nice to see a more expensive HG kit pull off likewise. The Cherudim doesn't have any sabers, but it's folding GN Pistol II's have a blade on the underside of the barrel. These pistols can transform via a simple folding joint from pistols to close combat weapons pretty well. They fit snug into the Cherudim's hands. Shield Bits Extending from Cherudim's butt in a slightly questionable practice is the unit's GN Drive, covered by several GN Shield Bits. The Bits are the main gimmick of the kit, a more defensive variation of the GN Fangs used by Zwei and Arche. These consist of nine identical panels, which are mounted on various places across the body; 2 on the left shoulder, 1 on each knee and 6 covering the GN Drive. A transparent plastic stand is provided, allowing you to display the Bits in hovering defensive action. Some variety is possible but you're pretty much stuck with them as floating shields, not the flying mini-guns Lockon can also use them for. Still, the thought is appreciated. Overall This is a decent kit. I'll admit I probably like the basic design of Dynames more, but Cherudim is far from the worse design out there and alot of the well handled kit engineering helps smooth things over for doubters like me. I don't think this is a must have kit, but it's a strong representation of the Cherudim design. Be sure to lock it on to your shopping basket.

RM45.40
img
SAVERM32.60

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

  • Estimate Arrival Late August 2017
  • This is a model kit, assembly needed
  • Pre-painted Plastic, no paint requires

RM217.40
img
SAVERM101.50

P-Bandai Exclusive: 1/144 Gundam 00 Seven Sword (RG)

P-Bandai Exclusive: 1/144 Gundam 00 Seven Sword (RG)

RM198.50
img
SAVERM30.00

[EXPO LIMITED] RG 1/144 Gundam Exia (Metallic Extra Finish Ver.)

This is Limited Production items

RG 1/144 Gundam Exia (Metallic EXPO Edition)

RM250.00
img
SAVERM170.00

[EXPO] RG 1/144 Gundam 00 Raiser Trans-Am Mode (Clear Edition)

RG 1/144 00 Gundam Trans-Am Mode (EXPO Clear Edition)

RM190.00
img
SAVERM35.40

P-Bandai Exclusive: HG 1/144 GN-Arms Type E (Real Color Ver.)

P-Bandai Exclusive: HG 1/144 GN-Arms Type E (Real Color Ver.)

*NOTE: RG GUNDAM EXIA NOT INCLUDED*

RM264.60
img
SAVERM29.90

P-Bandai Exclusive: RG 1/144 Gundam Exia R2

P-Bandai Exclusive: RG 1/144 Gundam Exia R2

  • Exia Repair II!
  • This is a pre-painted model kit, no paint require.

RM170.10
img
SAVERM570.00

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser (Trans-am Mode)

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser [Trans-Am] - 2nd Reissue
  • Estimate delivery March 2019
[ACCESSORIES]
  • GN Micro Missile x 8
  • GN Beam Saber x 2
  • GN Vulcan
  • GN Shield x 1 [2 parts]
  • GN Sword II x 2
  • GN Sword III x 1
  • Particle Disruption Missile x 2
  • Hand Missile Unit x 2

RM1780.00
RM1780.00 Request Stock
img
SAVERM116.50

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Parts Set Conversion

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Part Conversion

Estimate arrival Late August 2017

Trans-am clear parts for PG 1/60 00 Raiser Trans-AM ver. , which is sold separately.
Clear orange, are provided for the antennas. Molds separated with clear pink, clear green, and clear red.
GN drive exterior parts of both shoulders are not included.  Armored exterior parts such as GN Sword â…¡, GN Sword â…¢, GN Shield, etc. are reproduced with clear parts.
PG 1/60 Special Stand sold with PG 1/60 00 Raiser Trans-AM ver. 
This kit is getting released to celebrate the 10th anniversary of Mobile Suit Gundam 00 anime series.

RM283.50
img
SAVERM20.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM270.00
img
SAVERM61.90

NG 1/100 MSJ-06II-A Tieren Ground Type

  • A kit in 1/100 scale to appeal the mechanical detail the type Tieren the ground.
  • Incorporating a new shield is movable up and down shoulder, a more robust representation of the MS. On the surface of the tank aircraft
  • Enforcement of texturing to the image.
  • Step and use the aircraft surface, the bottom of shoes.
  • Comes with a new bazooka. Sensor can be mounted at the bottom of the box. The image of the structure parameters weapon
  • By dividing ー star, directing further reality real weapon. Dedicated to the arm can be mounted in the joint.
  • For the foot takes the mold from real weapons, represent a mold in the ground type. Mono
  • Is reproduced in clear plastic. Under the clear plastic mold is adopted aware of the camera.
  • Movable joint of the arm is aware of the double joint, can be reproduced to smooth the stance of each weapon. Holding the weapon or
  • Comes with a certain facial expression are indispensable to posing palm.

RM105.80
img
SAVERM27.90

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

Estimate Arrival: September 2017

RM170.10
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
img
SAVERM23.90

[05] HG 1/144 MSJ-06II-A Tieren Ground Type (Land)

- MS mass production innovation Federation of humanity.

- In the hip using a double ball joint that allows moving up and down.
- Left and right arm can be mounted on the large-caliber rifle is armed only. The mechanism of poly shoulder caps
Used, can reproduce the various action poses and flexible.
- Each hand grip is an x corresponding to the left or right. x 1 left palm. Comes with a foil seal for detail color reproduction.
- Armed Includes: x 1 rifle arm, carbon blades x 1

RM48.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
img
SAVERM716.80

PG Gundam Exia (LED Lighting Model)

This beautifully detailed Perfect Grade kit of the Gundam Exia includes an LED set to light it up in dramatic fashion!  Featuring a carefully engineered inner frame, it's fully posable after assembly and is loaded with weapons; a special base is included as well. The LED color can be changed from blue to red, and the LED for the GN drives and the eyes can be activated separately. LED set requires 4 AA-size batteries, not included.

[Includes]:

* GN sword
* GN shield
* GN long blade
* GN short blade
* GN beam saber (x2)
* GN beam dagger (x2)
* Marking stickers
* Silver stickers
* Silicon sheet (x2)
* LED set

RM1200.00
RM1200.00 Request Stock
img
SAVERM239.00

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]


From "Mobile Suit Gundam 00 - A wakening of the Trailblazer -",

Double-o'quanta of image which executed Transum appeared in master grade.
Reproduce the red shining airframe by using special coating such as gross injection, extra finish etc.

A water transfer type decal is also newly included.


- SPECIAL COATING

The image of the shining red aircraft at the time of activating Transum is reproduced with special coating. 
Gross injection is used for the pink color armor of the main body etc.
Pearl pink coating is applied to produce a shiny feeling.
The red armored part adopts extra finish processing with metallic feeling.

Metallic colors are used for joints and arms.
 
- DECAL
Adjusted color tone according to transom mode, various markings are newly included with water transfer type decal.

- GN Drive's lighting condition can be reproduced with LED unit (sold separately) mounted!

Attached armed: GN sword V / GN sword bit / GN shield

RM360.00
img
SAVERM288.80

MG 1/100 00 GUNDAM Seven Sword/G (TRANS-AM Mode) [Special Coating]

MG 1/100 00 GUNDAM SEVEN SWORD/G (TRANS-AM MODE) [SPECIAL COATING]


Side story variant of the popular MS 00 Gundam in a limited production Trans-Am variant of the Master Grade Gundam 00 Seven sword with stylish pearlescent red hue over its entire body. This MG kit encompasses total 7 of blades on the mobile suit. It's fully articulated and made with modern plastic.

RM430.00
img
SAVERM457.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM920.00
img
SAVERM42.00

P-Bandai: HG 1/144 Advanced GN-X [Deborah Galiena]

P-Bandai: HG 1/144 Advanced GN-X [Deborah Galiena] 
Release Date: April 2019
Estimate Delivery: May 2019


[ACCESSORIES]

  • Proto GN Lance
  • Advanced GN Beam Rifle
  • GN Beam Saber
  • GN Shield

RM138.00
img
SAVERM64.00

HG Brave Standard and Commander Test Type 2 in 1 Combo Set

HG Brave Standard and Commander Test Type 2 in 1 Combo Set


Package include :

1. [071] HG 1/144 Brave Commander Test Type
2. [072] HG 1/144 Brave Standard Test Type 

Each one 1 unit

RM128.00
img
SAVERM40.00

[EXPO] RG 1/144 Gundam OO Raiser Special Clear Color Expo Edition

The genuine EXPO RG 1/144 Gundam 00 Raiser Clear Colour (stand not included).



RM180.00
img
SAVERM112.10

MG 1/100 Gundam Dynames

- From [Mobile Suit Gundam 00] Gundam Dunames will finally appear in MG with completely new modeling!

- Expanded the stand of the GN Sniper rifle, and you can reproduce the stance of [sniper] which hides the main body to the ground.
- Head gimmicks corresponding to snipe pose movements, posing tension due to the leg joint structure can be reproduced.
- Reproduce the deployment of GN full shield.
- Missiles of the lumbar region -  " knee part -  " Hatch opening and closing of signal bullets and deployment of GN thruster Gimmicks unique to MG are installed

[accessories]
- GN Sniper Rifle x 1
GN Beam Pistol & Holster x 2
GN beam sabel x 2
GN shield x 2
GN full shield x 2

[Product content]
Molded article x 17
Foil seal x 1
Marking stick x 1
PP sheet x 1
Instruction manual x 1

RM157.50
img
SAVERM42.00

P-Bandai: HG 1/144 GN-X IV (Mass Production Type)

P-Bandai: HG 1/144 GN-X IV (Mass Production Type)

[ACCESSORIES]
GN beam rifle (long / short)
NGN bazooka
GN buster sword
GN shield
GN beam saber

RM158.00
img
SAVERM169.00

Event Limited MG 1/100 00 XN Raiser [Clear Version]

Event Limited MG 1/100 00 XN Raiser [Clear Version]

RM430.00
img
SAVERM22.00

Daban 8816 MG 1/100 Gundam Astraea Type F with Weapon Set Model Kit for Boy

Daban 8816 MG 1/100 Gundam Astraea Type F with Weapon Set 

RM158.00
img
SAVERM20.00

[M.J.H] MG 1/100 Gundam 00 Seven Sword Ver MB

MJH Gundam 00 Seven Sword G Inspection Color Ver MB

Brand : MJH [formerly known as Dragon Momoko]
Series : Mobile Suit Gundam 00
Grade : Master Grade
Size : 1/100

Package include :
1) Action base as usual
2) Double GN big Sword
3) Double GN Big Gun

Package not included:
- Sticker Sheet
- Decal Sheet
- Water Decal Sheet

Note : This is not BANDAI product.

RM170.00
img
SAVERM59.70

Tamashii Nations GN-001 Gundam Exia

-GUNDAM UNIVERSE Gundam Exia started. Drive out the target.

-Gundam Exia appears from the first [Mobile Suit Gundam 00]. Equipped with GN Sword, GN Long Blade, and GN Short Blade to reproduce a voluminous decoration.

-Comes with a large volume GN sword.
-The GN sword can be stored. GN Blade can be mounted on the mount racks on both legs.
-The GN Blade comes with two types of blades, short and long.
-The pose in the play is decided by the stylish modeling arrangement.

[set content]
? Main body
? Replacement wrist left and right
? GN Sword
? GN Long Blade
? GN Short Blade
? Soul stage joint

RM120.00
img
SAVERM3.00

GaoGao Gao Gao 00-64 HG 1/144 Gundam Fighter Avalanche Exia

HG 1/144 Gundam Fighter Avalanche Exia


Brand : Third Party Brand
Scale : 1/144
Grade : High Grade

Please not that this is NOT Bandai product

RM29.80
img
SAVERM80.60

Gundam Universe GN-0000 + GNR-010 00 Raiser (Completed Set)

The GN-0000 00 Gundam from "Mobile Suit Gundam 00" joins the "Gundam Universe" lineup from Bandai, together with the GNR-010 00 Raiser support unit! The two can be combined, and two GN Sword II are included as well. Order yours now!
  • [Figure Size]: Approximately 15cm
  • [Materials]: ABS, PVC

[Set Contents]:

    • Main figure
    • Interchangeable hands (x1 each, left and right)
    • GN Sword II (x2)
    • Joint for Tamashii Stage

    RM189.00

    Showing 31 - 60 of 195 products