• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

• Total of 520pcs parts to create a robot . Can switch and transofrm between the massive G-Fortress flyer, the core base, core top and core fighter individual units, plus of course the actual ZZ Gundam itself. 
  
• Inner detail is not as good as some other MG releases, but given the nature of the ZZ, that's not surprising. 
  
• Fully posable hands are just part of the completely posable structure that lets you duplicate virtually any scene you can think of. 
  
• Weapon includeds two beam sabers, and a huge double cannon.
  

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

• Released Date: 2001 Well armed with two beam sabers and 12 1.3MW funnel remote beam weapons. 
  
• From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. 
  
• The shoulder armor opens just like the prototype. 
  
• Binder with accureate details and thruster. 
  
• Details opening cockpit area. 
  
•  Weight: 1kg
  

• I'm going to skip obvious puns like "Bandai Strikes Gold!" and just get to the good stuff: 
  
• The Hyaku-Shiki gets the MG treatment! The results are incredible. 
  
• Bandai has engineered this piece so that the beautifully gold plated pieces have very fine sprue attachment points to make assembly easy. 
  
• Just use care in removing the numerous perfectly plated gold pieces from the tree. 
  
• As usual with a Bandai MG series everything moves via poly-cap joints. 
  
• Leg and arm armor can be removed. A beautiful kit and a real attention-getter on display.

• A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  
• No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  
• Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g
  

Weight: 1000g

• Leg joints feature adjustable extension, allowing the kit to take dramatic action poses from the series. 
  
• Chest unit and leg units are built around a movable frame, just like in the series. Includes a beam rifle with exchangeable magazine, Hyper Bazooka, retractable shield, two beam sabers, and Vulcan pod. 
  
• Weight:1000g 
  

BB217 RX-178 Gundam Mk II Titans Plastic Model Kit. Stories: Developed by new faction, TITANS, which is an elite soldiers group formed by Earth Federation and Zeon remnants, there are three MS that operated. It has new technology called Moveable Frame, so it can move even without its outer armor attached. Weapons included: Beam Rifle, Hyper Bazooka, Beam Saber 2X, Shield, Energy Pack 2X, and a Bazooka Cartridge. Two suits were successfully stolen by Camille, Quattro, and his subordinates during Quattro’s mission to spying this Gundam at Green Noah colony. Camille hatred towards TITANS made him crazy enough to hijack one of the Gundam. Seeing it as a great opportunity, Quattro and his mates help Camille escape the Colony along with the Gundams, unit 3 piloted by Camille while the other (unit 1) is taken by force. After safely arrived at A.E.U.G. battle ship, Argama, they had the Gundam re-colored to A.E.U.G. white and blue scheme. It was piloted by Camille until half of the story before he changed to Zeta Gundam. The pilot then changed to Emma Sheen, a former TITANS soldier who has changed side to A.E.U.G. because she hated the way TITANS works. It can be combined with G-Defenser for more mobility and fire power in space. The Movable Frame concept actually taken by Camille for Zeta Gundam because of some problems that Zeta has before applying the concept. Near the end of series, Gundam Mk-II was destroyed along with Emma’s tragic death. Story Source: http://eyeshield30.wordpress.com Weight: 130g LIMITED STOCK AVAILABLE NOW!

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box. 
  
• Weight: 529g
  

• Color molded body is reproduced in Real Type Color! Seal comes with special markings!
  

Mastering grade with MG campaign of the 30th [ganpura] anniversary and clear exterior. The limited amount, and a clear exterior parts and one runner are an additions wholly and same prices. This is a kit of reasonable difficulty that will look fantastic when it is all put together It is a really high-quality kit and comes with a variety of parts that should come together nicely when assembled. If you have been looking for a Gundam centrepiece, this is definitely a good choice. Simple enough that you can assemble parts in between games at http://www.poker.dk/, and modelled on yet another Gundam from the ongoing series, it is definitely one that many Gundam kit enthusiasts can sink their teeth into with relish. It can enjoy a mechanical interior.

HD Color (Limited Version) !!!A limited edition version of the Zeta Gundam 2.0 released in conjunction with the Blu-Ray edition of "Mobile Suit Z Gundam" Molded in a glossy plastic and includes foil-stamped original markings and HD decals. Features an enhanced transformation system that improves the proportions in both Mobile Suit and Wave Rider modes. Redesigned joints for Mobile Suit mode plus the addition of a waist that can twist for a fusion of posability and transformability. Accessories include a beam rifle, beam saber, shield, grenade pack, and Hyper Mega Launcher.

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts! Simple instruction included in a box! Z Gundam's wiki The MSZ-006 Zeta Gundam, designed by Kazumi Fujita, is a fictional weapon of the anime Mobile Suit Zeta Gundam from the Universal Century timeline of the Gundam metaseries. Its popularity has led to many variations, upgrades, redesigns and influenced later design works such as the Zeta Plus[2] and the Wing Gundam. It is also the only mobile suit having a real, pilotable, down-scaled, 7-metre-tall, hydraulically controlled model built. The name "Zeta Gundam" is the eponymous Gundam in which the suit appears, Mobile Suit Zeta Gundam, which is the sequel of Mobile Suit Gundam. The suit however is first deployed mid-series as a reinforcement suit. It was piloted by the series' main character Kamille Bidan until the end of the series. The Zeta Gundam also became the starting mobile suit of the main character Judau Ashta of the sequel Mobile Suit Gundam ZZ before he switched to the more powerful MSZ-010 ZZ Gundam. The Zeta Gundam eventually sustained heavy damage and was abandoned at the conclusion of the first Neo Zeon movement. The unit has also appeared in most of the Super Robot Wars game series, which is famous for featuring different mecha of many anime franchise together in one mixed story. Inside the Gundam franchise, it has been featured in the PlayStation game Gundam Battle Assault (Gundam: The Battle Master 2 in Japan), the PS2 game Mobile Suit Z Gundam: AEUG vs. Titans and PSP's Gundam Battle series. It is also one of the featured units in the March 2007 release of the PS3 and Xbox 360 game Dynasty Warriors: Gundam, a spin-off series of the Koei game Dynasty Warriors. Three variant units are also featured in Episode 9 of Gundam Evolve.[10] In the SD Gundam manga Double Zeta Kun kokoniari(ダブルゼ－タくんここにあリ, Little Double Zeta is here), Zeta Chan is the main female character, a girl version of Zeta with only the V antenna and the name recognizable. Source: http://en.wikipedia.org

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

RX-178 Gundam Mk-II (MG) A.E.U.G. Color

BB Hyaku Shiki & Mega Bazooka Launcher

Along with the Hyaku-Shiki (Type 100), the Rick Dias is one of the most popular mecha from Zeta Gundam as it was designed by Mamoru Nagano of L-Gaim and Five Star Stories fame. This new kit does it justice, featuring overall slimmer, sharper proportions than the chunky High Complete Model or 1/100 kit of many years ago. As usual for kits in the High Grade series, it's molded in color, features snap assembly, and has poly-caps for all the moving joints.Reviews by Gundam.tk: Personal review: Limited mobility on the feet as the armor pieces on the leg constrained the movement of the lower body part, you have a clearly loose part on the head of the rick Dias (once is completed), and you got to be careful on 'some' of the part.

• Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  
• Features huge rear skirt and knee armor, as well as upgraded thrusters.
  
• Can convert from Quattro Custom to standard Rick Dias! 
  

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. A custom display stand for showing it off is included as well. All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. Foil stickers for details are included.

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  
• At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
• Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
• Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
• The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
• Accessory: Beam Rifle, Beam Sword x4