Price Clear







Showing Modelling Tools + PAINTING MATERIALS product(s)

Showing 571 - 600 of 976 products

img
SAVERM11.10

Mr Hobby Mr Base White 1000

Mr. BASE WHITE is useful for making a black, red or other dark-colored surface white. This newly developed product uses special pigments to completely hide the base color and aids application of detailed finishing and top coats. Because it also works as a surfacer, it can be used to hide small imperfections. - Personal advice Clean the surface with sandpaper before applying surfacer, + after applying surfacer, kindly wait for a moment until the surface dries. - How long to wait for the this white base1000 to dry? Normally at minimum of time :), please wait an hour for it to dry to cover the surface. - Do I need thinner for this white base 1000 to dry? Since are using the bottles, you should thin them with a 50:50 or a 60:40 ratio to prevent "cobwebbing". "Cowebbing" - means the primer dries as soon as it is sprayed out of an airbrush, leading to an effect that looks like spider webs. You may also see some video on applying surfacer + white base 1000 by hobbyist http://www.youtube.com/watch?v=1qmk2TYeh1Y

RM17.80
img
SAVERM12.80

Mr Paint Remover 40ml

  • Apply the mark setter to the position where decal is to be stuck.
  • Stick a slide mark
  • Spread it evenly and remove water with a swab, etc.
  • Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

Item consider compressed air can / flaming item and have EXTRA RM16 charges if deliver to Sabah / Sarawak.

RM16.10
img
SAVERM4.60

[B513] (MR HOBBY) Mr. Super Clear Gloss (170ml)

Mr. SUPER CLEAR is a solvent-type coating agent for creating surfaces of superior quality.
It can be used not only for color painting, but also as the perfect coating agent when your work needs that added touch.

- 170ml

Do and Don't

- This coating agent is specially formulated for use with Mr. COLOR. It should be used after Mr. COLOR has dried completely.
- It cannot be used over water-based hobby colors.
- It will damage slide marks if applied over them.
- Should not be used in airbrushing on hot and humid days (temperature of 30° C or more, humidity of 70% or more) as blushing can occur.
- When a Mr. COLOR and Mr. SPRAY car color is marked “two coat”, be sure to apply a coat of Mr. SUPER CLEAR SHINE. This applies to automobile colors as well. The original color can be restored by recoating.

RM45.30
img
SAVERM7.30

Tamiya Park Green Paint Spray TS-35

Colour: Park Green
Tamiya Paint Code: TS-35
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)


Do not spray on decals and sticker.

If you cannot find the Tamiya Spray Paint that your are looking for, you can refer to this picture and contact us to ask if there's any stock left. We will be replying ASAP after checking from supplier. If you are using mobile phone to view the webpage, u may Whatsapp us too.

RM32.60
img
SAVERM7.30

Tamiya Metallic Blue Paint Spray TS-19

Colour: Metallic Blue
Tamiya Paint Code: TS-19
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)


Do not spray on decals and sticker.

These cans of spray paint are extremely useful for painting large surfaces. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized plastic model car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.

If you cannot find the Tamiya Spray Paint that your are looking for, you can refer to this picture and contact us to ask if there's any stock left. We will be replying ASAP after checking from supplier. If you are using mobile phone to view the webpage, u may Whatsapp us too.

RM32.60
img
SAVERM7.80

Fine Surface Primer (L) for Plastic and Metal - Pink 180 ml

This pink primer is perfect for applying an undercoat to car models that are going to be painted in bright red. By using a pink primer, car models painted in red shades will have better brilliance compared to using gray or even white primer. It is also the perfect primer for base coating small and large figure models. The flesh tones applied to figure models primed in pink will yield a more lifelike appearance.
  • Indispensible when painting bright red, this primer provides an undercoat.
  • Gives a smooth and precise finish.
  • Can contains 180ml.

RM52.10
img
SAVERM10.90

Tamiya Liquid Surface Primer 40ml - White

  • The currently available Liquid Surface Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modelling brush. However, since some modellers have found it difficult to paint over it with a lighter color, we now release this white-colored version of the liquid primer to solve this problem. 
  • You can also thin out the primer with Tamiya Lacquer Thinner for convenient application with airbrushes. Each bottle contains 40ml.

RM25.00
img
SAVERM10.98

Tamiya Liquid Surface Primer 40ml - Gray

  • In order to smooth over small scratches etc., many modelers have created their own liquified putty by dissolving putty with lacquer thinner. Tamiya now makes this process a whole lot easier by releasing our very own liquified putty, Liquid Surface Primer. Just brush on over scratches, rough areas etc. and you will get that perfect smooth finish.
  • Applies easily to small areas using a modeling brush
  • Can be used on plastic, metal and wooden models
  • Can be further diluted using Tamiya Lacquer Thinner, allowing it to be used in airbrushes.
  • 1 bottle contains 40ml

RM25.00
img
SAVERM3.98

Tamiya Color Acrylic Paint X-15 (Light Green) (23ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 23ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-15
Type: Light Green
Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00
img
SAVERM13.90

[B504] Mr Metal Primer R 40ml Spray

Brand: Mr Hobby
Capacity: 40 ml

Undercoats for metal models and parts to make Mr.COLOR and other AQUEOUS HOBBY COLORS usable for surfaces.

RM30.00
img
SAVERM13.30

Tamiya Color Enamel Paint XF-26 Deep Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-26
Color: Deep Green
Quantity: 10ml

RM10.60
img
SAVERM13.30

Tamiya Color Enamel Paint XF-13 J.A. Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: XF-13
Color: J.A. Green
Quantity: 10ml

RM10.60
img
SAVERM8.00

[B602] MR Hobby Premium Top Coat Semi Gloss 88ml Spray

Water based Semi Gloss coating agent for finishing surfaces.


It is very effective for military models as well as for skin color in figures. It is water based, so you can use it on surfaces painted with AQUEOUS HOBBY COLOR, ACRISION COLOR and Mr. COLOR.

RM40.00
img
SAVERM13.30

Tamiya Color Enamel Paint XF-61 Dark Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Oil Base) 
Color Code: XF-61
Color: Dark Green
Quantity: 10ml

RM10.60
img
SAVERM11.90

Mr Hobby - MR. PRIMER SURFACER 1000 (Gray) 40ml

  • Mr Hobby Brand

This is a surfacer with primer (base filling paint).
The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models has been improved for this product.
Surface attachment has been enhanced not only for plastic models but also for metal in etched parts and resin.
Spray type and bottle type are available. Color is gray.

RM21.00
img
SAVERM12.00

Mr Hobby Mr. Surfacer 1000 Spray Deluxe

Mr.SURFACER 1000 contains finer granules than Mr.SURFACER 500. They are both used in much the same way but ,due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible. Available in bottle and spray.

RM36.00
img
SAVERM11.40

Mr Hobby - MR.FINISHING SURFACER 1500 (Grey) 40ml

Mr Hobby - MR.FINISHING SURFACER 1500 (Grey) 40ml

This surfacer can be applied to give a final finish to the surface more smoothly.It has the characteristic of being fine grained and it is not prone to clogging up detail in the mold. Most suitable not only for making a base before painting but also for surface finishing of an original mold before casting.

RM21.00
img
SAVERM11.40

Mr Hobby - MR.FINISHING SURFACER 1500 (Black) 40ml

Mr Hobby - MR.FINISHING SURFACER 1500 (Black) 40ml


This is a black version of the Finishing Surfacer.This black base allows the omission of the painting of a black coat before applying a metallic color and reduces the thickness of painting.

RM21.00
img
SAVERM10.40

Tamiya Color Acrylic Paint Mini X-09 (Brown) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.


Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-09
Color: Brown
Volume10ml

RM9.50
img
SAVERM10.40

Tamiya Color Acrylic Paint Mini X-28 (Park Green) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.


Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-28
Color: Park Green
Volume: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C120 RLM80 Olive Green Semi-Gloss (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semiglossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C120
Colour: Olive Green
Quantity: 10ml

RM9.50
img
SAVERM1.50

Mr. Hobby-Mr. Color-C038 Olive Drab (2) Flat (10ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: C038
Colour: Olive Drab (2)
Quantity: 10ml

RM9.50
img
SAVERM7.30

Tamiya Matt White Paint Spray TS-27

Colour: Matt White
Tamiya Paint Code: TS-27
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)

Do not spray on decals and sticker.

These cans of spray paint are extremely useful for painting large surfaces. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized plastic model car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
If you cannot find the Tamiya Spray Paint that your are looking for, you can refer to this picture and contact us to ask if there's any stock left. We will be replying ASAP after checking from supplier. If you are using mobile phone to view the webpage, u may Whatsapp us too.

RM32.60
img
SAVERM7.30

Tamiya Light Gun Metal Paint Spray TS-42

Colour: Light Gun Metal
Tamiya Paint Code: TS-42
Bottle Size: 100ml
Application: Plastic
Brand: Tamiya (Made in Japan)

Do not spray on decals and sticker.

These cans of spray paint are extremely useful for painting large surfaces. The paint is made up of a synthetic acrylic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized plastic model car bodies. Tamiya spray paints are not affected by acrylic or enamel paints. They may be applied over a cured spray painted surface.
If you cannot find the Tamiya Spray Paint that your are looking for, you can refer to this picture and contact us to ask if there"e;s any stock left. We will be replying ASAP after checking from supplier. If you are using mobile phone to view the webpage, u may Whatsapp us too.

RM32.60
img
SAVERM3.99

MODO Clear Yellow M-045 18ML

  • contains 18ml
  • clear color
  • MODO Clear Yellow M-045 18ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
img
SAVERM10.98

MODO MX-19 BRIGHT SILVER 18ML

  • contains 18ml
  • MODO BRIGHT SILVER MX-19 18ML
  • mixed together with lacquer thinner for model kit painting.

RM19.00
img
SAVERM10.98

MODO GUN METAL MX-20 18ML


  • contains 18ml
  • metal color
  • MODO GUN METAL MX-20 18ML
  • mixed together with lacquer thinner for model kit painting.

RM19.00
img
SAVERM2.98

MODO MK-03 Super Glossy Varnish

  • contains 1 hardener liquid bottle (15ml) + 1 clear liquid bottle (15ml)
  • mixed propotion of 2 : 1 for 20ml of clear liquid with 10 ml harderner.
  • do not touch within 2 - 4 hours / cover with protective cover to avoid dust.
  • after spraying, top coat finishing is not needed anymore.
  • super glossy varnish surface effect

RM33.00
img
SAVERM11.58

MODO PM-07 PROMIX 7 - Clear Gold 20ML

  • contains 20ML
  • Limited special edition color
  • MODO PM-07 PROMIX 7 - Clear Gold 20ML

RM24.40

Showing 571 - 600 of 976 products