• Home
  • Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + MS GUNDAM WING / ENDLESS WALTZ product(s)

img MS GUNDAM WING / ENDLESS WALTZ

Showing 1 - 30 of 136 products

Quick View
img
SAVERM319.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM580.00
RM580.00 Add to cart
Quick View
img
SAVERM75.90

MG 1/100 Gundam Deathscythe EW

  • It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  • Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  • The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  • Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  • Katoki Hajime has designed the markings. 
  • Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g

RM152.00
RM152.00 Add to cart
Quick View
img
SAVERM105.90

MG 1/100 Gundam Epyon EW

  • Gundam Epyon is newly designed in the EW version. 
  • It can be completely transformed from the MS mode into the flying mode. 
  • Thanks to "the pullout system", you can reproduce its heat rod's whip. 
  • Various gimmicks give expression to "Soryu". Its neck, mouth and hand claws are movable.
  • Includes marking stickers designed by Hajime Katoki.

RM182.00
RM182.00 Add to cart
Quick View
img
SAVERM93.90

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM176.00
RM176.00 Add to cart
Quick View
img
SAVERM93.90

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM140.00
RM140.00 Add to cart
Quick View
img
SAVERM77.90

MG 1/100 Shenlong Gundam EW Ver.

  • The 3rd volume of the EW version is Shenlong Gundam! 
  • The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  • Marking work designed by Hajime Katoki. 
  • Accessories: Dragon-Hang, Beam Trident, Shield

RM150.00
RM150.00 Add to cart
Quick View
img
SAVERM64.90

MG 1/100 Wing Gundam EW Ver.

  • Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  • Tons of new features! 
  • Molded in updated colors as shown in EW! 
  • New package art creates a unified look for the MG Endless Waltz series! 
  • MG EW series produce a sense of a new package!
  • Marking decals designed by Hajime Katoki.
  • Parts expand for performance-based dynamic posing! 
  • Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2

RM145.00
RM145.00 Add to cart
Quick View
img
SAVERM70.00

P-Bandai: MG 1/100 Altron Gundam EW Ver. (Nataku)

Note : Box is slightly dented but the runners are still in good condition.

From "MOBILE SUIT GUNDAM WING?Endless Waltz", the MG 1/100 Altron Gundam has finally been made available into a kit!
???
???Mobile Suit XXXG-01S2
???Wufei named this machine "Nataku"
???
From “MOBILE SUIT GUNDAM WING Endless Waltz", the MS Altron Gundam, enhanced version of the Shenron Gundam,
releases in the Master Grade Series.
It is named “two-head dragon(er-tou-long)?ALTRON” because of the characteristic weapon “Dragon Hang” equipped on both arms,
and now reproduced with a new design which is based on Master Grade standards.
????
* The 2 characteristic weapons is repoduced with new design!
??Includes the Dragon Hang and Twin Beam Trident with a new design based on Master Grade standards.
??
?(Dragon Hang)
??The stretch structure which shows the storage and attack position of the arm is recreated.
??The claw tip is movable on two-axis, and can be stretched, opened and closed.
??An arm block for extension is included, and it is possible to obtain a powerful pose display according to the scene.
??Includes 2 auxiliary stands which allows a stable display of the Dragon Hang for the attack pose.
?
?(Twin Beam Trident)
??The handle comes with various detailed new parts.
??Output ports are at both ends, which allows to mount the clear molded beam blades onto both sides.
??After removed the Beam Blades, the Beam Trident can be attached and carried on the backpack.
??
* Comes with BRAND NEW Character Figures??
????Includes a newly designed same-scale figure of Chang Wufei wearing the uniform of Marimeia troops (standing / sitting)
?
* Comes with a new design of water slide decals!
?
Weapons: Dragon Hang x 2 / Twin Beam Trident

RM380.00
RM380.00 Add to cart
Quick View
img
SAVERM2.00

Third Party Brand HG 1/144 Wing Gundam Zero Custom

HG 1/144 Wing Gundam Zero Custom


Brand : Third Party Brand
Grade : High Grade
Scale : 1/144
Model : Wing Gundam Zero Custom

Please note that this is Not Bandai product

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM10.98

SD Ex-Standard Wing Gundam Zero EW

  • SD Ex-Standard XXXG-00W0 Wing Gundam Zero EW
  • SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM30.00

P-Bandai : MG 1/100 Tallgeese Fluegel EW

Mobile Suit Gundam Wing Endless Waltz: Glory of the Losers continues its amazing releases with the Master Grade Tallgeese Flugel! This kit offers numerous amount of newly molded parts, from its head to its wing binders. The kit also shares the same molds with the MG 1/100 Tallgeese EW for its main body and added with various equipment new to the Tallgeese Flugel, that includes both heat lance and heat halberd.

RM420.00
RM420.00 Add to cart
Quick View
img
SAVERM5.10

JMS HG 1/144 The Nascent Desert Sandrock Fighter with Water Decal

JMS HG 1/144 The Nascent Desert Sandrock Gundam


Brand : JMS
Scale : 1/144
Grade : High Grade
Model : Sandrock

Please note that this is NON-Bandai product

RM22.90
RM22.90 Add to cart
Quick View
img
SAVERM99.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM152.00
RM152.00 Add to cart
Quick View
img
PO PriceRM170.00

MGSD Wing Gundam Zero EW

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2024
Estimate arrival : DEC 2024

- P-O Price RM170.00
- Deposit RM30.00, Balance RM140.00
- We will inform to make balance RM140.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • "New dimension wings" that surpass the conventional wisdom of SD Gundam! Introducing "Wing Gundam Zero EW" from the SD high-end brand "MGSD"!
  •  The main wings of the "Wing Binder", which combines mobility and beauty, can be deployed to expose the silver parts inside and the clear parts with "reflection cut". When the upper wings of the secondary wings are pulled up, the lower wings are linked and deployed in tandem.
  •  By making full use of the mobility of the "Wing Binder", it is possible to recreate the atmospheric entry pose.
  •  The first variable mechanism in the MGSD series is installed. It is possible to recreate two "Neo Bird forms": "Outer Atmospheric Mode" with the main wings folded, and "Atmospheric Mode" with the main wings deployed.
  •  Equipped with a deployment gimmick on each armor part. In addition to deploying the unit on the side of the head, when the upper part of the shoulder armor is raised, the lower armor is linked and deployed, exposing the silver parts inside.
  •  The base of the front skirt deploys forward, so the range of motion of the skirt and legs is not hindered.
  • In addition to the combination gimmick, the "Twin Buster Rifle" is equipped with a barrel extension gimmick and a joint deployment gimmick that connects to the arm to increase holding power.
  • MGSD's unique frame structure reproduces the internal frame in SD size. The internal frame is the core of the product, allowing for smooth movement.
  • Camera details are expressed in a double structure. By layering the detailed internal parts and clear parts, a realistic multi-layered structure is created.

[Accessories]
  • Twin Buster Rifle x 1
  • Shield x 1
  • Effect parts x 2
  • Marking sticker x 1

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM120.00

Gundam Universe XXXG-01D2 Gundam Deathscythe Hell (EW)

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  APR 2024
Estimate arrival : MAY 2024

- P-O Price RM320
- Deposit RM100, Balance RM220
- We will inform to make balance RM 220 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The majestic Gundam Deathscythe Hell from "Mobile Suit Gundam Wing: Endless Waltz" is joining the "Gundam Universe" action-figure series from Bandai! Its impressive Beam Scissors weapon is included, as is its distinctive cloak. It's fully posable for maximum action -- you need this incredible figure in your collection, so order yours today!

[Figure Size]: Approximately 15cm tall
[Materials]: ABS, PVC

[Set Contents]:
- Main figure
- Interchangeable weapon-holding hands (x1 each, left and right)
- Beam Scissors
- Effects for Beam Scissors
- Tamashii Stage exclusive joint (Tamashii Stage is not included)

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM390.00

[PRE-ORDER] The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Color Version)

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : JUN 2022 
Estimate arrival : JULY-AUG 2022

- P-O Price RM390.00 
- Deposit RM100, Balance RM290.00 
- We will inform to make balance RM 290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

The Gundam Base MG 1/100 Wing Gundam Zero EW Ver. Ka (Pearl Version)

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
Quick View
img
SAVERM52.00

[Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)

MG 1/100 Nataku/ Altron Gundam from Super Nova (Blue Version)


- MG 1/100 Altron (Blue Version)
- From Super Nova
- Pre-painted plastic, no paint required.
- Self assembly required

Kindly note that this kit is a NON-BANDAI product.

RM148.00
RM148.00 Request Stock
Quick View
img
SAVERM97.60

P-Bandai Exclusive: MG 1/100 Heavyarm Gundam EW (Reissue)

Second batch is open for Pre-order.

Estimated delivery: Jan, 2018

The long waited Gundam W Endless Waltz gunpla!
Comes armed: double gatling gun
This is prepainted plastic model kits, require simple snap-fit assembly only. .

RM302.40
RM302.40 Request Stock
Quick View
img
SAVERM19.90

[211] HGAC 1/144 Leo

The fourth installment of the "Gunpla Evolution Project" is the HGAC 1/144 Leo from "Gun dam Wing"! 

The Leo is a mass-produced MS named after the "Leo" constellation. Emphasis has been placed on this kit's ease of assembly, making it easier for fans to collect and build multiple kits! 

The new joint structuring on this kit allows for a wide range of articulation and shortens the time required for assembly. The joints can also be fitted later, making the process easier for those who enjoy customizing and painting their kits. 

The arrangement of the runners have also been reorganized by grouping the parts together to aide in an easy visualization of the kit's construction such as "leg parts" or "arm parts" in proximity of each other. 

In addition to ease of assembly, the HG 1/144 Leo also recreates designs and precise details that have been added to this new format such as the usage of clear parts instead of stickers on the main camera on the head. 

A drum gun, beam sabers, and shield and included and can be stored I the back of the shield. 

Combine this with other HGAC kits such as the "HGAC 1/144 Wing Gundam".

- Accessories
  • Drum Gun x 1
  • Beam Sabel x 2
  • Shield x 1

- Product content
  • Molded parts x 5
  • Instruction manual x 1

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM284.60

P-Bandai: MG 1/100 Wing Gundam Zero Custom EW + Drei Zwerg [Special Coating]

P-Bandai: MG 1/100 Wing Gundam Zero Custom EW + Drei Zwerg [Special Coating] 


Release date : Jan 2018
Estimate delivery : Feb 2018

RM595.40
RM595.40 Request Stock
Quick View
img
SAVERM438.00

Hi-Resolution Model 1/100 Wing Gundam Zero Ew [Special Pearl Coating Ver.]

The impressive wing Gundam zero from the OVA "Gundam wing: endless Waltz" is getting the hi-resolution BAN216746 treatment! Based on its new appearance in the Gundam wing EW manga, it now features a transforming Neo-Bird mode, opening armor gaps for zero system use, and 6 wings. Each hi-resolution BAN216746 kit comes with a combination plastic and die cast pre-built frame that offers extraordinary detailing and posing capabilities. Armor is made of high quality plastic materials that has no need for paint or alteration and features different finishes ranging from high gloss to Pearl to metallic. Set includes twin Buster rifle, beam saber x2, 2 wires, and shield. Gundam frame x1. Runner x15. Instruction manual x1.

RM760.00
RM760.00 Request Stock
Quick View
img
SAVERM80.00

[Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver.

[Super Nova - MoXin] XXXG-OOWO  MG 1/100 Wing Gundam EW Ver.


- The wing feather effect is included
- Drei Zwerg Weapon Unit is included
- Dedicated Action Base is incduded

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM34.90

[02] HG 1/100 Shen Long Gundam

The Shenlong Gundam with its powerful extending unfolding right hand that features a dragon themed head with flame throwers. 


Accesories:
- Beam glaive
- Shield
- Effect parts - flame throwers.

RM55.00
RM55.00 Request Stock
Quick View
img
SAVERM308.60

Hi-Resolution Model 1/100 Wing Gundam EW

A Bandai Hobby Online Shop exclusive release of the Wing Gundam from "Gundam Wing" in its EW appearance. New opening gimmicks have been incorporated into the design of the wings while still allowing it to be able to transform into Bird Mode. 

The Hi-Resolution model series comes with a combination plastic and diecast pre-built frame that offers extraordinary detailing and posing capabilities. Armor is made of high quality plastic materials that has no need for paint or alteration and features different finishes ranging from high gloss to pearl to metallic. Set includes Buster rifle with removable energy cartridges, energy cartridge racks, beam sabers, and shield. 

Accessories:
- Buster rifle
- 2 x Beam sabers
- Shield

Set content:
- Gundam frame x1
- Runner x15. 
- Water decal
-  Instruction manual x1

RM500.00
RM500.00 Request Stock
Quick View
img
SAVERM40.00

P-Bandai: HGAC 1/144 Leo [Space Type]

Based on the Mobile Suit Gundam Wing anime series, the Leo model kit is in the 1/144 scale and becomes a fully articulated figure once complete. Leo is produced in special purple coloring and includes a wide selection of weaponry.

Accessories: 
- Mega beam gun
- Drum gun
- 2 x Beam sabers
- Shield
- Long type beam rifle
- Short type beam rifle
- Beam rifle for colony

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM41.00

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam

[Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam


- MG 1/100 Heavyarms Custom 
- From Super Nova
- Pre-painted plastic, no paint required.
- Self assembly required

Set contains:
- 2 joker mask
- 4 Gatling guns
- Gatling gun holder

Weapon Holder is not included.

Kindly note that this kit is a NON-BANDAI product.

RM159.00
RM159.00 Request Stock
Quick View
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM30.00

[M.J.H] 1/100 High Resolution Wing Zero Custom Gundam

  • [M.J.H] 1/100 High Resolution Wing Zero Custom Gundam
  • Brand: MJH 
  • Grade: HIRM 1/100
  • Box Size (L x W x H): 42.4cm x 28.4cm x 9cm

RM150.00
RM150.00 Request Stock
Quick View
img
SAVERM70.00

P-Bandai: MG 1/100 Shenlong Gundam EW (Liaoya Unit)

P-Bandai: MG 1/100 Shenlong Gundam EW (Liaoya Unit)

The Master Grade Shenlong Gundam will be packed with its Glory of Losers weapon, Liaoya.

[ACCESSORIES]

  • Liaoya
  • Shenlong Shield
  • Dragon Fang
  • Beam Trident
  • Action Base
The kit will also include a newly printed water slide decal for detailing.

RM290.00
RM290.00 Request Stock
Quick View
img
SAVERM23.90

[223] HGAC 1/144 Maganac

- From the TV anime [New Mobile Suit Gundam Gundam W], general unit of the MS unit Maguanac team composed of 40 units is three-dimensionalized with HGAC!

- Based on the concept of [Fine Build], adopt a structure pursuing ease of assembly.
- Shield for backpack, Heat Tomahawk for mount at the waist.
- Shoulder armor 's flip up gimmick.

[accessories]
Beam rifle x 1
- Heat Tomahawk x 1
- Shield x 1

[Product content]
- Molded parts x 6
- Foil seal x 1
- Marking stick x 1
- Instruction manual x 1

RM48.00
RM48.00 Request Stock

Showing 1 - 30 of 136 products