Price Clear







Showing Gundam Model Kits + MASTER GRADE (MG) product(s)

Showing 391 - 420 of 447 products

img
SAVERM99.90

MG 1/100 Master Gundam (Hyper Mode)

  • Hyper Mode Master Gundam (MG)

RM200.00
img
SAVERM113.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM215.00
img
SAVERM79.90

MG 1/100 Gundam Age-1 Normal

  • The MG gene is passed on to Gundam AGE's first generation- the Age-1 Normal!
  • Currently being broadcast, Mobile Suit Gundam: AGE's first generation lead Suit is the first to be recreated as a Master Grade kit. Based on the design notes of Kanetake Ebikawa, this suit is packed full of detail. Foil seals cover the chest and head emitters, representing lights, and various gimmicks are built in.
  • Head: Neck junction and rear helmet are detailed
  • Shoulders: Rear shoulder armor (flaps, thrusters) is detailed 
  • Waist: Connectors, as well as waist armor is detailed
  • Legs: inner leg armor. Near the point behind the movable armor is subjected to detail throughout.
  • Knee: Knee can be recreated using seals or elements. 
  • Feet: Rear foot is detailed, and sole design incorporates verniers. 
  • Accessories: DODS Rifle, Shield, Beam Saber x2, Beam Dagger x2,
  • Pilot Figures (Standing, Sitting)
  • Item Size/Weight : 31.1 x 20.1 x 11.3 cm / 561g

RM130.00
img
SAVERM88.70

MG 1/100 RMS-108 Marasai

  • Display to evolve! Package that comes with special parts! 
  • Parts of the amount is detachable. The internal detail, including steps to reproduce. 
  • Reproduction of the back of the head with the pipe power even visible from the gaps in the armor detail. 
  • By integrating the LED unit (sold separately), the camera eye is capable of emitting light. - Cockpit hatch is openable. Cockpit can be seated figure. 
  • Form, of a unique power to take over the pipe and shoulders of MS, while MS-dione series of federal troops Reproduction and spike armor. With movable shield, the saber can be mounted on the backside. 
  • RMS-108 was developed campaign period ... Marasai Guripusu, the company Anaheim Electronics The successor of the Haizakku. In the first MS was adopted Gandariumu γ in armor material, MS second generation Machine is a masterpiece of the first period. 
  • Accessories: beam rifle, beam saber x— 4, shield, wrist for having weapons (rifle, For saber), fist (left or right), palm of the new method (left or right), only joint action-based, Figure, figure cockpit, joint parts, secret parts

RM151.20
img
SAVERM43.90

MG 1/100 RX-78-2 GP01 Zephyranthes

MG GP01 with proportions as interpreted by Hajime Katoki features a transforming core fighter that can dock with the Gundam body and includes beam rifle, beam sabers, and collapsible shield with e-pack ammo.
  • Gundam GP01 Zephyranthes
  • Accessories: 2x beamsaber, 1x beam rifle, 1x shield
  • Item Size/Weight : 31 x 20 x 7.7 cm / 529g

RM105.00
img
SAVERM77.60

MG 1/100 Gundam Age-1 Titus

  • It is to the height with new AGE series which inherits the gene of MG. 
    Titus appearance!
  • Investigation of the raison d'etre of an internal structure -- ` -- メカディテール was taken in to the space of each part as the internal structure ` of an attractive sake.
    Although the space on the back side could be seen conventionally at the time of pausing, ` ガンプラ which does not have ` spare time more is investigated by increasing the amount of information to this space.
  • Coexistence of completeness and the ease of making -- Emphasis is put on ` making-easy [ ` ], raising completeness.
    In MG AGE series, it has composition which includes an internal structure in the exterior, and, as a result, the number of parts decreases conventionally. And yet, it is more highly complete structure.
  • Accessories : effect part x2 for beam lariats (auxiliary support part x2), effect part x6 for a beam knee kick, effect part x8 for a beam shoulder tackle, pilot figure x2
Item Size / Weight : 31 x 20 x 13 cm / 566g

RM132.30
img
SAVERM93.10

MG 1/100 Aile Strike Gundam (with Bazooka)

- Aile Strike Gundam MG with bazooka included scale 1/100, limited series stock, only 300 yen more to get this modal. - Top up with bazooka compare to original MG22242 Normal Aile Strike Gundam scale 1/100 (3800 yen). - Preview may be seen at this website address: http://mygundammodelkits.blogspot.com/2009/08/mg-gat-x105-aile-strike.html - The other remained the same, I have taken some photos from above website, thanks first.

RM151.80
img
SAVERM77.60

MG 1/100 Gundam Age-1 Spallow

  • The evolved AGE-1 Spallow appears as an MG! 
  • Designed with a complex internal frame.
  • Includes several manipulator variants to enable various posing options! 
  • Clear parts reproduced with clear-colored elements.
  • Thorough details cover the Suit- even the internal cockpit hatch is detailed!
  • Includes 1/100 figure of Flit Asuno.

RM132.30
img
SAVERM96.10

MG 1/100 RX-78-2 Gundam (w/clear parts)

Item Size/Weight : 31 x 20 x 14 cm / 717g

RM155.80
img
SAVERM76.90

MG 1/100 Gundam Age-2 Normal

The 2nd Gundam featured in Mobile Suit Gundam Age, the Age-2 Normal, features a completely transformable design with no need for part swapping and possesses incredible surface detail. Also, this kit features great articulation and a unique build design which allows the AGE-2 to transform into it's Strider form without any parts swapping! Marking stickers and extra hand parts are also provided.MG only gimmicks on this release include; retractable landing gear integrated into the armor, an opening cockpit in both battle and robot form and a set of double sided beam sabers. Runner x17, foil sticker x1, marking sticker x1, gundam decal x1, instruction manual x1 included.

RM175.00
img
SAVERM91.20

MG 1/100 Strike Rouge Gundam (Clear Color Ver.)

Here's another cool "Clear Color" release from Bandai! Strike Rouge follows the same design as its previous Master Grade release with the exception of its new, crisp, clear color scheme. Its parts appear almost crystal-like, and, though they are colored, they are transparent. This version of Infinite Justice is just made to shine under the proper lighting! Like all of the Bandai Master Grade model kits, this Strike Rouge Clear Color Ver. is completely snap-together with parts that are molded in color so no paint or glue is needed to complete it. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. This Strike Rouge Clear Color Ver. Master Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.


More Info from Wikipedia
The Strike Rouge is a mobile suit using spare parts from the GAT-X105 Strike that was in Mobile Suit Gundam SEED and its sequel Mobile Suit Gundam SEED Destiny. Its primary pilot is the Princess of Orb Cagalli Yula Athha. The word Rouge is the French word for the color red.

After the first Strike was destroyed outside the territory of the Orb Union, a different Strike model was built, using spare parts of the originial suit. This Strike variant, called the Strike Rouge, was built on the Kusanagi during the last days of the first Bloody Valentine War and piloted by Cagalli Yula Athha, who used the suit for a short time during the Second Battle of Jachin Due on 26 September, CE 71. Among her actions was the rescue of Athrun Zala, who detonated his suit inside ZAFT's superweapon GENESIS to prevent it from firing on Earth.
The Strike Rouge remained operational until mid CE 74, and was used as Cagalli's personal mobile suit after she and the crew of the Archangel left Orb. She launched in her suit several times to convince the Orb forces not to fight against the ZAFT ship Minerva, although with little success. When the Archangel returned to Orb, after modifying it to his specifications (by configuring the suit's Variable Phase Shift armor to reflect the original Strike's colors) Kira Yamato launched into space with the Strike Rouge (equipped with a booster) and used it briefly to protect the Eternal. The Strike Rouge however was no match against ZAFT's newer and more powerful mobile suits and was heavily damaged in this battle. With both of its pilots equipped with newer and more powerful mobile suits, the Strike Rouge did not see battle again and it remains questionable if it was ever repaired or simply decommissioned.

Weapons wise, the Strike Rouge features the exact same weaponry as the original GAT-X105 Strike. This includes the two head-mounted CIWS guns, two combat knifes and a beam rifle.
Like the Strike, the Strike Rouge was always equipped with a Striker Pack. The most commonly used was the Aile Striker, which added additional two beam sabers to the armament. Besides the Aile Striker, the suit also was known to be equipped with the Integrated Weapons Striker Pack, or IWSP. This pack combined the best aspects of the Aile, Launcher and Sword packs from the original Strike. It included a large number of additional weaponry to the suit's armament, including railguns, cannons, anti-ship swords and a combined shield, mounting a gatling gun and a beam boomerang.

Though never stated in the series, it is obvious that the Aile Striker Pack for the Strike Rouge was upgraded by the Orb Union between the end of the First Bloody Valentine War and the Second Bloody Valentine War. The original Aile Striker Pack did not have full flight capability in the atmosphere, however in Gundam SEED Destiny the Aile Strike Rouge is shown on several occasions flying in Earth's atmosphere along side the ZGMF-X10A Freedom.

RM148.70
img
SAVERM79.90

MG 1/100 Buster Gundam

  • Built for heavy-duty combat, the Buster Gundam is an artillery unit specializing in long-range assault! 
  • Characterised by its two massive cannons, the Buster Gundam's iconic look has been redesigned for maximum detail, and it's SEED-specific X100 frame gives it outstanding maneuverability!
  • Full of arms-specific gimmicks! 
  • Recreate the massive Hyper Impulse Long-Range Sniper Rifle by docking the two smaller weapons together! 
  • Gun barrel equipped with pump-action gimmick for realistic action.
  • The dual sub-arms are equipped with a movement gimmick and can hold the huge weapons for dynamic firing poses.
  • Shoulder-mounted missile hatches open.
  • One of the five Gundams built under the Earth Alliance's G Project, the GAT-X103 Buster Gundam was created on the versatile X100 Frame, and designed to overwhelm any gunfight with its massive firepower.
  • Accessories: 350mm Gun Launcher, 94mm High-Energy Rifle,
  • Fist (Left and Right), Open Palm (Left and Right)

RM160.00
img
SAVERM115.10

MG 1/100 GAT X-303 Aegis Gundam

  • Accessories: high-energy beam rifle 60mm, beam saber × 4, beam pair shielded, Hand grip (left and right), palm (left and right) - Item Size / Weight : 39 x 31 x 8 cm / 791g


Technical Data

  • Model number: GAT-X303
  • Code name: Aegis Gundam
  • Unit type: prototype attack use transformable mobile suit
  • Manufacturer: Morgenroete, Inc
  • Operator(s): Earth Alliance; ZAFT (Zodiac Alliance of Freedom Treaty)
  • First deployment: 25 January C.E. 71
  • Accommodation: pilot only, in standard cockpit in torso
  • Dimensions: head height 18.86 meters
  • Weight: max gross weight 79.6 metric tons
  • Armor materials: unknown
  • Power plant: ultra compact energy battery, power output rating unknown
  • Propulsion: unknown 


According to wikipedia

GAT-X303 Aegis is a prototype transformable attack-use mobile weapon, it is featured in the anime series Mobile Suit Gundam SEED. The unit is piloted by Athrun Zala.

The Aegis is a commander-type mobile suit with very advanced sensors and heavy attack power. It can transform into a mobile armor configuration armed with a "Scylla" 580mm energy cannon (which is later mounted on the GAT-X131 Calamity Gundam). This cannon is powerful enough to destroy even a spaceship. Additionally, the suit also features a hand-held 60mm beam rifle. For close-range combat, Aegis is equipped with 4 beam sabers. As these weapons are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration. Like most other mobile suits, the Aegis is equipped with two "Igelstellung" 75mm multi-barrel CIWS in its head. Lastly for defense the suit mounts a single shield on its left arm and is equipped with the Phase Shift armor system.

Designed as a command-type mobile suit by the Earth Alliance, the Aegis was one of the original five mobile suits created as part of the Atlantic Federation's G Project. The Aegis eventually was rolled out on January 20, CE 71, together with the other suits produced as part of the project. Stored in the colony Heliopolis, it became the target of ZAFT and, together with all but one of the prototype mobile suits, was stolen by them on January 25. Its pilot is Athrun Zala, who then used the suit for several months.

The Aegis is transported to Earth shortly after the Battle of Orbit on February 13 to pursue the Archangel. It is held at the Carpentaria Base in Australia until the Archangel passed through the Indian Ocean, where it was sent to rendezvous with the Vosgulov-class submarine Cousteau. The Aegis, GAT-X102 Duel, GAT-X103 Buster and GAT-X207 Blitz successfully intercepted the Archangel in midocean and forced the heavily damaged assault ship to lay over at Orb for repairs.

Finally, its destruction occured in late May while fighting Kira Yamato in the GAT-X105 Strike and Tolle Koenig in his FX-550 Skygrasper. Athrun self-destructed the Aegis while grappling the Strike, destroying both units. He ejected before self-destruction and was found injured on the shore by Cagalli Yula Athha. Later in that year, he returned to combat piloting the new, Aegis-derived ZGMF-X09A Justice. From June to the end of the war he piloted the Justice as part of the Clyne Faction, alongside Kira Yamato in the ZGMF-X10A Freedom.

The fragments of the destroyed mobile suit eventually found their final, peaceful use as a playground for young children, on the same island where Athrun and Kira fought. Its shield was later found and sold at the black market auction for junk where Lowe Guele picked up the TMF/TR-2 BuCUE Tactical Reconnaissance Type which head he used temporarily for his MBF-P02 Astray Red Frame. A variation on its transforming system is used by ZAFT, on a much larger scale, in the ZGMF-X11A Regenerate.  

After the war, the Earth Alliance produced another Aegis which was then upgraded by Actaeon Industries into the GAT-X303AA Rosso Aegis.


Weapons

  • CIWS guns: Mounted in the Aegis's head are two "Igelstellung" 75mm multi-barrel CIWS guns. These light projectile weapons are used to intercept missiles and to destroy lightly armored vehicles, although it is classified as Anti Air.

  • Beam Saber: Aegis is equipped with 4 beam sabers that are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration.

  • Shield:A simple metal shield that can be mounted on its left arm.

  • Scylla Canon: A powerful energy cannon that is only able to be fired in its mobile armor configuration. The weapon has enough power to tear through the entire width of an Earth Alliance battle ship.

  • Beam Rifle:For ranged combat the Aegis Gundam mounts a 60mm high-energy beam rifle.


Author p/s: In comparison with NG 1/100 Aegis Gundam, there were alot of huge differences in term of mobility of the modelling kits, the detailed of the armor, and the ability of transformation is another unique buying point for this gundam kit too, MUST BUY item!!

RM172.80
img
SAVERM76.90

MG 1/100 Gundam Age-2 Dark Hound

  • Fully transformable AGE Master Grade: The Dark Hound!
  • Complete transformation to flight form!
  • In addition to each weapon, a variety of manipulator parts are included.
  • Using an Action Base (sold separately) enables easy and accurate aerial posing.
  • Piloted by Bishidian Pirate Captain Ash, the Dark Hound is a repaired and renovated Gundam AGE-2 Normal.
  • Accessories: DODS Lancer, Anchor Shot x2, Beam Saber x2, Pilot Figure (Sitting, 

RM175.00
img
SAVERM59.90

MG 1/100 RX-78GP01FB Gundam Full Burnern

MG GP01Fb with proportions as interpreted by Hajime Katoki features a transforming core fighter that can dock with the Gundam body and includes beam rifle, beam sabers, and collapsible shield with e-pack ammo. Fb model includes alternate shoulders with pop out verniers and feet that can dock into housings for space use.
  • Master Grade Gundam GP01 Full Burnern
  • 1x Core Fighter, 2x Beamsaber, 1xBeam Rifle, 1x Shield
  • Item Size/Weight : 31 x 20 x 10 cm / 665g

RM120.00
img
SAVERM239.90

MG 1/100 Sinanju Ver.Ka (Titanium Finish)

- Includes: 

Beam Rifle, Beam Saber x2
Grenade Launcher, Shield, Beam Axe x2
Cockpit figure, Standing figure, Attachment for Action Base.

RM480.00
img
SAVERM74.90

MG 1/100 RGM-96X Jesta

  • Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
  • Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
  • Movable shield arm can hold the shield against the backpack or in a usable position! 
  • Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
  • Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
  • With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
  • Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

RM165.00
img
SAVERM156.90

MG 1/100 MSN-06S Sinanju

  • Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  • The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
  • Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
  • The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
  • With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".

RM292.00
img
SAVERM119.20

MG 1/100 Gundam Age-2 Double Bullet

  • Appearing in Gundam AGE, the Age-2 Double Bullet has evolved the Age-2 designs even further! 
  • The Double Bullet, an evolution of the Gundam AGE-2 appears as an the MG! Designed with a complete inner frame and all the unique characteristics of Master Grade AGE kits.
  • Transformation mechanism is also reproduced, along with all the details you expect from a modern Master Grade kit. 
  • Twin DODS Cannons included with blade and beam parts in order to reproduce iconic scenes from Gundam AGE!
  • Includes calf missile deployment gimmick.
  • A truly gimmick-based MG, the cannon's position can be changed to be fired while being held or not, and can be separate from the shoulder mounts to be used like standard DODS Rifles. 
  • Transformation gimmick included to shift into flight mode! 
  • Also includes scale Asemu figures.
  • Accessories: Twin DODS Cannon x2, Calf Missile x2, Beam Saber x2,
  • Pilot Figure (Sitting, Standing)

RM132.70
img
SAVERM89.90

MG 1/100 Aile Strike Gundam Ver.RM


  • Marking the completion of the MG SEED Remaster Project: The original Aile Strike Gundam!
  • Following the release of the Duel Gundam Assault Shroud, Aegis Gundam, Buster Gundam and Blitz Gundam, the four SEED Remaster Gundams last year, and using feedback about the technologies and concept designs used, the GAT-X frame is recreated here in high definition! Designed following the newer proportions, this MG reflects the sort of forward-thinking redesigns that characterise the MG series.
  • Includes Beam Rifle and folding Armor Schneider knives.
  • Can recreate the Perfect Strike Gundam using the MG Sword Launcher Striker Pack! (Sold Separately)
  • Can be mounted with most other Striker Packs, and activated with included battery pack! 
  • Accessories: Aile Strike Pack, Rechargeable Battery Pack, Beam Rifle, Beam Saber x2,
  • Shield, Armor Schneider x2, Pilot Figure x4, Dedicated Stand

RM162.00
img
SAVERM77.40

MG 1/100 RX-78-2 Gundam Ver.3.0

  • Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  • August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  • With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  • Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  • Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  • Rear leg armor enables better range of motion in the ankle joints. 
  • Includes paintable material for the internal structure for easy detailing.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka

RM191.50
img
SAVERM269.10

MG 1/100 MSN-02 Perfect Zeong

  • The Master Grade kit of the regular Zeong (sans legs) was big enough...in this scale, the Perfect Zeong is just about the size of a typical Perfect Grade kit, standing a massive 36 cm tall. Take note of the weight and dimensions and estimate accordingly. Over 350 parts plus polycaps for joints, stickers for detail, screws for stability and wire for the cables that allow the Zeong's hands to shoot out and snap back. Make room on your display shelf!
  • Total of 480pcs parts to be assembly, also with stickers, screws for stability and wire for the cables that allow the Zeong's hands to shoot out and snap back. Total height is 38cm. pls see size comparison from Dalong.net and it is one of the largest Gundam model kit!

RM330.80
img
SAVERM69.90

MG 1/100 MS-06J Zaku II Ver 2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
img
SAVERM89.90

MG 1/100 Strike Rouge + Ootori Equipment Ver.RM

  • Announced along with the release of the Mobile Suit Gundam SEED Destiny HD Remaster's Ootori Striker, this marks the fastest a Suit has been translated into an MG in Gundam history! 
  • Following in the footsteps of the Aile Strike Gundam, the Strike Rogue is remastered (Ver.RM), giving the kit a more streamlined look and wide range of motion. Introduced in the HD Remaster of M.S.G.: SEED Destiny, the Ootori Striker Pack was designed by master mechanical designer Kunio Okawara. An Integrated Weapon Striker Pack, the Ootori is full of gimmicks
  • Following the Aile Strike Gundam, MG Strike of Rouge becomes a Ver.RM.
  • Ootori Striker Pack wings expand into a characteristic -  X -   shape, and tail can be folded. 
  • Missile Launcher is mounted over the left shoulder.
  • Dedicated Stand to help reenact arial action poses is included.
  • IWSP EW454F Ootori Pack is separable from the Strike Rogue, and includes a transformation gimmick to shift into flight mode. 
  • The MBF-02 Strike Rouge has been equipped with the IWSP (Integrated Weapon Strike Pack) Ootori Striker for maximum offensive output! Designed with an aerodynamic profile, advanced propulsion system and a full arsenal- Railgun, Beam Launcher, Missile Pod and Anti-Ship Sword. 
  • Accessories: 57mm High-Energy Beam Rifle, Anti-Beam Shield, Armor Schneider x2, Beam Saber x2, Ootori Striker Pack, Dedicated Stand

RM162.00
img
SAVERM60.80

MG 1/100 RX-78/C.A. Casval Gundam

  • Simulation Games [ambition of Gillen] that appeared in Gundam is red.
  • Item Size/Weight : 31 x 20 x 11 cm / 640g

RM119.10
img
SAVERM32.00

[Daban] 6609 MG 1/100 Duel Gundam Assault Shroud

[Daban] 1/100 Duel Gundam Assault Shroud (MG)


Series: Gundam Seed
Grade:Master Grade (MG)
Manufacturer: Daban
Scale:1/100

RM88.00
img
SAVERM83.90

MG 1/100 Build Strike Gundam Full Package

  • From the anime Gundam Build Fighters: the Build Strike Gundam Full Package in its Master Grade form!
  • The main Suit in G.B.F., the Build Strike Gundam was was designed around the Aile Strike Gundam Ver.RM, giving it a light and versatile frame for speed and adaptability. Upgraded with a new transformable beam gun, the Build Booster pack, and a whole new color scheme. As a Master Grade, this Suit has the level of detail that we have come to expect from a high-level kit.
  • Build Booster wings can be extended for flight form or lowered.
  • Build Booster can be mounted on the included display stand.
  • Build Booster beam cannons can move into firing position or used as stabilizers in flight form
  • Beam rifle can be transformed into three different forms: the Beam Gun, Beam Rifle, and Enhanced Beam Rifle
  • Extra Beam Gun pieces mount onto Chobham shield using attachment gimmick.
  • Three point landing gear give the Booster a stable landing platform
  • Accessories: Beam Rifle (Three-Form Transitioning), Chobam Shield, Beam Saber x2,
  • Dedicated Display Stand x1
  • Item Size/Weight : 39 x 31 x 9.1 cm / 916g

RM168.00
img
SAVERM99.90

MG 1/100 Sengoku Astray Gundam

  • The customized Sengoku Astray in the Master Grade quality that fans have come to expect
  • Based on the Red Frame Astray, the Sengoku Astray is more heavily armored than the original Red Frame and presented as a detailed 1/100 scale kit. Shoulder armor and shield are equipped with a deployment gimmick, and the kit is accurately color-moulded with clear and plated parts, and includes decals for the smaller details.
  • Sengoku Yoroi shoulder armor is deployable- use it to give the Sengoku Astray two extra sword-wielding arms or as a weapon to increase the Astray’s punching power.
  • Oni Tate shield is deployable to server as rear protection or as an arm-mounted shield, and the ‘mouth’ of the shield can open
  • Kotetsu and Kiku-ichimonji katana swords have chrome plated blades! 
  • Recreate the dual-blade fighting style, and utilize the deployable shoulder armor as extra arms or knuckle weapons, and sheathe the swords in the shoulder armor
  • This Suit has its own remodeled Red Frame, along with the custom katanas Kotetsu and Kiku-ichimonji 
  • Accessories: Kiku-ichimonji (Katana), Kotetsu (Katana), Oni Tate Shield

RM200.00
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 391 - 420 of 447 products