Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

Armors can be taken off to express NADLEE version. GN cannon on the shoulders can be slided to recreate battle mode. NADLEE's hair can be moved to express movement. GN bazooka in two modes (normal and battle mode). Double joint system in arm articulations. Waist supported with axis cover parts for balanced posing. Various wrists and foil stickers included.

Force Impulse w/Sword Silhouette Extra-Finish Simple instruction included in a box. Weight : 593g

Introducing GUNDAM DYNAMES featured in GUNDAM 00 from 1/100 scale series. Various wrists and foil stickers included. Covering parts in the waist for stable-ness. Belts made with TPE. Chest lens and shoulder belts made with special material. New joint system installed. Double joint system in the shoulders. Accessories include of: Includes beam rifle, beam sabers, hand guns, and armor covers.

The Cherudim Gundam joins the lineup of 1/100 scale precision models of Mobile Suits from Gundam 00. Shoulders incorporate a swing mechanism for enhanced mobility forward, back, up, and down, allowing for dramatic "aim and shoot" poses. Forehead-mounted sensor covers open for sniper mode, and the "follow screen" is molded in translucent plastic. GN shield bits can be removed and placed on a stand to re-enact scenes from the show. Includes GN sniper rifle II, and two GN beam pistol II guns.

First introduced in the "Mobile Suit Gundam Seed Frame Astrays" manga that ran in the Dengeki Hobby magazine, Trojan Noiret's custom Gundam Astray Green Frame now receives the coveted 1/100-scale plastic kit treatment from Bandai! This much-anticipated snap-fit kit release comes sharply detailed and molded in its distinctive dark green and white colors. Its polycapped joints allow it to be set in various dynamic action poses. Weaponry includes its signature Twin Sword Rifle that can switch between sword type and rifle type, two Beam Sabers, and a shield. Also included in the set is an 8.5cm unpainted figure of Trojan molded in beige. A sheet of foil stickers and a sheet of Trojan Noiret custom marking stickers are provided.

Bandai 467300 HG Gundam Seed Destiny ZGMF-X23S SAVIOUR GUNDAM 1/100 Scale Kit

Item is a plastic model kit and assembly is required (this is a snap kit and glue is not required)

Our items are Bandai original items distributed in Japan and comes with Japanese instructions (illustrated diagram is included)

A beautiful version of the Gundam Astray (red frame) as piloted by Lowe Gule, molded in colored plastic and featuring snap-fit assembly for ease in building. In 1/100 scale it's got lots of nice detail and is superbly poseable for a kit that's not a Master Grade! Included weapons are the Gerbera Straight (sword; painted in bright silver chrome) and the Beam Rifle. Also included is a 1/20 scale unpainted figure of Lowe Gule. Stickers are included for detail.

GNY-001F Gundam Astrea Type-F History of GNY-001F Gundam Astrea Type-F: The story is that as HRL’s battleship has gotten closer to CB’s Colony Krung Thep, 874 is gathering intelligence using the Sadalsuud, Ruido comes out in the Astrea to intercept. The instruction that came from Veda was “Defeat”. Here, Ruido in the Gundam starts attacking the person. Later on, the second generation Gundam Meister arrived in a transport aircraft on a battlefield. Four HRL MS “Phantom”s against the Gundam Meister 874’s Gundam Astraea fight a one-sided battle that ends in 36 seconds. Ruido in Astraea shoots down the first Helion Platoon that was examining AEU’s Orbital Elevator. In addition, 874 who intercepts in Sadalsuud, who sees the shadow of an approaching aircraft, proposes that Ruido does a check.Ruido sorties in the Astraea in place of the injured Marlene. Ruido does not want Marlene to go out into the battlefield. If he was fighting very well, then there’s no need for her to go out into the battlefield. Ruido exterminates the Helion force through Astraea. Source: http://gundam.wikia.com

GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

Sharing the same mold as the 2007 1/100-scale Gundam Exia, this kit of Setsuna's Mobile Suit comes molded in glossy colors for you to build the mech in Trans-Am mode. The sharply detailed kit can take on a wide range of poses upon completion, thanks to the use of polycaps in its joints. It comes fully equipped with its signature weaponry, including a GN sword that can switch to GN sword rifle mode, and foldable shoulder antennas. Not a drop of glue or paint is required! A sheet of hologram foil stickers is included. Combat Characteristics Designated as a 3rd-generation Gundam, the Gundam Exia is built with close combat as its major strength. The unit is the successor to its second generation predecessor, GNY-001 Gundam Astraea; much of Exia's design was heavily influenced from Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems. Exia was created as a high-mobility unit to greatly supplement its close combat role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control (AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1] The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration. Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1] When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater mobility is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack. The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet. In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat. Source:wikipedia

Gundam Astray Mirage Frame History of Gundam Astray Mirage Frame: In CE 71, the Orb Union's Morgenroete corporation built five Gundam Astray prototype mobile suits at Heliopolis, the MBF-P01 Astray Gold Frame, MBF-P02 Astray Red Frame, MBF-P03 Astray Blue Frame, MBF-P04 Astray Green Frame and the MBF-P05 Astray Mirage Frame, which were used to base the five G Project Gundams that they assisted the Earth Alliance's Atlantic Federation in creating. They successfully copied the EA's beam rifle and saber technology, but Morgenroete did not have access to the Phase Shift armor design, and compensated this by making the Gundam Astray units lighter and more agile than their EA counterparts. On January 25, CE 71, ZAFT's attack on Heliopolis to steal the Alliance Gundams also unknowingly interrupted the Astray Project. In order hide their progress, Orb's military decided to destroy the Astray lab. However all Astray prototypes survived and fell into the hands of different factions. The Mirage Frame, which only existed in form of reserve parts, fell into the hands of the mysterious organization Librarian, who modifed it to the existing model. With the rebirth of Rondo Ghina Sahaku by Librarian, he is given this mobile suit for his revenge towards Gai Murakumo. However, the Mirage Frame is heavily damaged in battle with Gai's MBF-P03R Gundam Astray Blue Frame 2nd Revise and the Mirage Frame is significantly upgraded to the MBF-P05LM2 Gundam Astray Mirage Frame 2nd Issue. Source:http://gundam.wikia.com

Gundam Astray Mirage Frame Second Issue Histories of Mirage Frame: In CE 71, the Orb Union's Morgenroete corporation built five Gundam Astray prototype mobile suits at Heliopolis, the MBF-P01 Astray Gold Frame, MBF-P02 Astray Red Frame, MBF-P03 Astray Blue Frame, MBF-P04 Astray Green Frame and the MBF-P05 Astray Mirage Frame, which were used to base the five G Project Gundams that they assisted the Earth Alliance's Atlantic Federation in creating. They successfully copied the EA's beam rifle and saber technology, but Morgenroete did not have access to the Phase Shift armor design, and compensated this by making the Gundam Astray units lighter and more agile than their EA counterparts. On January 25, CE 71, ZAFT's attack on Heliopolis to steal the Alliance Gundams also unknowingly interrupted the Astray Project. In order hide their progress, Orb's military decided to destroy the Astray lab. However all Astray prototypes survived and fell into the hands of different factions. The Mirage Frame, which only existed in form of reserve parts, fell into the hands of the mysterious organization Librarian, who modifed it to the existing model. With the rebirth of Rondo Ghina Sahaku by Librarian, he is given this mobile suit for his revenge towards Gai Murakumo. But when it was greatly damaged by Gai's MBF-P03R Gundam Astray Blue Frame 2nd Revise, Librarian upgraded the Astray Mirage Frame into the Astray Mirage Frame 2nd Issue while modifying Ghina for him to pilot it. It was dispatched into battle against Serpent Tail and this time destroyed Gai's unit for his revenge. He later betrays the Librarian Works and now being hunted by the Junk Guild, Serpent Tail and the Librarian Works due to his actions. Source:http://gundam.wikia.com/

GN-003 Gundam Kyrios MG 1/100. History of GN-003 Gundam Kyrios: Most of GN-003 Gundam Kyrios's history and exploits can be found on Allelujah Haptism's page. UN Forces Capture & Experimentation After the battle against the UN Army ended, Allelujah ejected the unit's GN Drive before it came into the hands of the UN Army. The GN Drive was recovered by Fon Spaak for Fereshte, and after Celestial Being negotiated for its return along with 0 Gundam's GN Drive. Kyrios was then used by the Human Reform League as an experiment with a Tieren arm and a GN-X hand using a GN Drive Tau. This specific experiment failed due to the GN Particles from the Drive having difficulty transferring power to the end of the experimented arm. Data gathered in these experiments was eventually used in development of the GNX-704T Ahead.What has happened to the Kyios after the expreiment remains unknown Sources:http://gundam.wikia.com

Beautiful 1/100 scale injection plastic kit of 'Freedom Gundam', from the hot new series 'Gundam Seed'. Superb tooling from Bandai ensures quality and detail, and their multi-gate technology allows several colors to be blown on a single runner, which reduces the number of necessary runners. The completed kit is highly poseable thanks to plenty of polycaps in the joints; the 'wings' open and close, and the plasma rifles fold up and over the mech's shoulders to be used in combat. Included is an unpainted plastic figure of Lacus Clyne, standing prettily and holding Haro in her hands.

This Special Edition of the 00 Raiser comes with all clear plastic parts giving it a look unique unto itself. Just like the original release this special edition comes with a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and GN Shields. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! The included clear green Celestial Being Action Base can be used to set the Mobile Suit in dynamic mid-air poses. A sheet of foil stickers is provided. Two button batteries are required, not included.