• The 3rd volume of the EW version is Shenlong Gundam! 
  
• The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  
• Marking work designed by Hajime Katoki. 
  
• Accessories: Dragon-Hang, Beam Trident, Shield
  

• MG Raiser, go!
  
• Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  
• Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  
• This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  
• Cockpit block features opening hatch. 
  
• Raiser binder is equipped with opening gimmick.
  
• Thanks to new molds, weapons such as Raiser Sword can be recreated.
  
• Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  
• 1/100 pilot figure (Standing, Sitting)
  

• Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  
• The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  
• F type armor is faithfully reproduced. 
  
• Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  
• Adopted the ""Advanced MS joint"". 
  
• The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  
• Runner x9, Realistic decal x1, Instruction manual
  

• From Mobile Suit Gundam 00V: the variant of the Gundam 00- the 00 Gundam Seven Sword!
  
• Includes an arsenal of weaponry. 
  
• Both the Suit and weapons are packed with gimmicks!
  
• Includes new kneecap parts unique to the Seven Sword!
  
• Includes all Seven Swords and the GN Sword II Blaster! 
  
• GN effect parts are reproduced using clear parts, and fixed joint are installed for easy weapon manipulation. GN Sword II Blaster features an expandable hilt, and can be mounted onto the binder.
  
• Both Shield and Sword mode mode of GN Buster Sword II can be reproduced!
  
• LED unit (sold separately) can be installed for a more accurate look!
  
• Also includes GN Sword II Long and Short (both featuring gimmicks), and GN Katars can be connected to shift to shield form!
  

• Freedom Gundam, the main MS of "Mobile Suit Gundam SEED", appears in the RG series. 
  
• The forms of its wings are designed on the basis of investigation of real machines, and new frames improve its movability. They add realism on it. 
  
• The "Lupus" beam rifle can be attached to the shield and add the stock. 
  
• The beam of the Lacerta beam saber is recreated with transparent parts. It can be worn at the waist. 
  
• The laminate anti beam shield can be mounted to its arms. 
  
• You can recreate its high mat mode and full burst mode. 
  
• Realistic decals improve its reality. 
  
• runner (includes advanced MS joint) x9, realistic decal x2, instruction manual 
  

• The commercialization of the Mobile Suit Gundam SEED DESTINY] Force Impulse Gundam Shin Asuka to boarding that appeared in at the long-awaited MG.
  
• Based on the TV set [Mobile Suit Gundam SEED DESTINY] original animation director is Shigeta Satoshi of cooperation, setting and, to pursue shape.
  
• Fully reproduce the deformation and coalescence, which is a feature of the force impulse. Each form can be exhibitions by the landing gear.
  
• And when leg flyer, MS form at the time, both legs of the interlocking gimmick internal organs. Other, you can have contact to the elbow, and the interlocking mechanism built.
  
• The side armor, deployment knife Built
  

• Duel Gundam Assault Shroud recreated as a Master Grade! 
  
• The second in the SEED Remaster series, the Duel Gundam is designed on the versatile X100 frame system! 
  
• Simple assembly provides the maximum range of motion with a minimum number of parts.
  
• Completely redesigned for the Remaster series of MGs.
  
• Reproduce the attachable Assault Shroud gimmick! 
  
• Cockpit hatch opens and closes, and cockpit internals are detailed.
  
• Yzak Joul figures included- sitting and standing
  
• Designed using exclusive blueprints for this Master Grade kit. 
  
• Accessories: Shield, 57mm High-Energy Rifle with 175mm Grenade Launcher,
  
• Shiva 115mm Rail Gun, 250mm 5-Barrel Missile Pod, 350mm Bazooka, Saber x2
  

• Accessories: high-energy beam rifle 60mm, beam saber × 4, beam pair shielded, Hand grip (left and right), palm (left and right) - Item Size / Weight : 39 x 31 x 8 cm / 791g
  

Technical Data

• Model number: GAT-X303
• Code name: Aegis Gundam
• Unit type: prototype attack use transformable mobile suit
• Manufacturer: Morgenroete, Inc
• Operator(s): Earth Alliance; ZAFT (Zodiac Alliance of Freedom Treaty)
• First deployment: 25 January C.E. 71
• Accommodation: pilot only, in standard cockpit in torso
• Dimensions: head height 18.86 meters
• Weight: max gross weight 79.6 metric tons
• Armor materials: unknown
• Power plant: ultra compact energy battery, power output rating unknown
• Propulsion: unknown 

According to wikipedia

GAT-X303 Aegis is a prototype transformable attack-use mobile weapon, it is featured in the anime series Mobile Suit Gundam SEED. The unit is piloted by Athrun Zala.

The Aegis is a commander-type mobile suit with very advanced sensors and heavy attack power. It can transform into a mobile armor configuration armed with a "Scylla" 580mm energy cannon (which is later mounted on the GAT-X131 Calamity Gundam). This cannon is powerful enough to destroy even a spaceship. Additionally, the suit also features a hand-held 60mm beam rifle. For close-range combat, Aegis is equipped with 4 beam sabers. As these weapons are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration. Like most other mobile suits, the Aegis is equipped with two "Igelstellung" 75mm multi-barrel CIWS in its head. Lastly for defense the suit mounts a single shield on its left arm and is equipped with the Phase Shift armor system.

Designed as a command-type mobile suit by the Earth Alliance, the Aegis was one of the original five mobile suits created as part of the Atlantic Federation's G Project. The Aegis eventually was rolled out on January 20, CE 71, together with the other suits produced as part of the project. Stored in the colony Heliopolis, it became the target of ZAFT and, together with all but one of the prototype mobile suits, was stolen by them on January 25. Its pilot is Athrun Zala, who then used the suit for several months.

The Aegis is transported to Earth shortly after the Battle of Orbit on February 13 to pursue the Archangel. It is held at the Carpentaria Base in Australia until the Archangel passed through the Indian Ocean, where it was sent to rendezvous with the Vosgulov-class submarine Cousteau. The Aegis, GAT-X102 Duel, GAT-X103 Buster and GAT-X207 Blitz successfully intercepted the Archangel in midocean and forced the heavily damaged assault ship to lay over at Orb for repairs.

Finally, its destruction occured in late May while fighting Kira Yamato in the GAT-X105 Strike and Tolle Koenig in his FX-550 Skygrasper. Athrun self-destructed the Aegis while grappling the Strike, destroying both units. He ejected before self-destruction and was found injured on the shore by Cagalli Yula Athha. Later in that year, he returned to combat piloting the new, Aegis-derived ZGMF-X09A Justice. From June to the end of the war he piloted the Justice as part of the Clyne Faction, alongside Kira Yamato in the ZGMF-X10A Freedom.

The fragments of the destroyed mobile suit eventually found their final, peaceful use as a playground for young children, on the same island where Athrun and Kira fought. Its shield was later found and sold at the black market auction for junk where Lowe Guele picked up the TMF/TR-2 BuCUE Tactical Reconnaissance Type which head he used temporarily for his MBF-P02 Astray Red Frame. A variation on its transforming system is used by ZAFT, on a much larger scale, in the ZGMF-X11A Regenerate.  

After the war, the Earth Alliance produced another Aegis which was then upgraded by Actaeon Industries into the GAT-X303AA Rosso Aegis.

Weapons

• CIWS guns: Mounted in the Aegis's head are two "Igelstellung" 75mm multi-barrel CIWS guns. These light projectile weapons are used to intercept missiles and to destroy lightly armored vehicles, although it is classified as Anti Air.
  

• Beam Saber: Aegis is equipped with 4 beam sabers that are mounted on the forearms and feet rather than hand-carried, all four can be wielded simultaneously, in either mobile suit or mobile armor configuration.
  

• Shield:A simple metal shield that can be mounted on its left arm.
  

• Scylla Canon: A powerful energy cannon that is only able to be fired in its mobile armor configuration. The weapon has enough power to tear through the entire width of an Earth Alliance battle ship.
  

• Beam Rifle:For ranged combat the Aegis Gundam mounts a 60mm high-energy beam rifle.
  

Author p/s: In comparison with NG 1/100 Aegis Gundam, there were alot of huge differences in term of mobility of the modelling kits, the detailed of the armor, and the ability of transformation is another unique buying point for this gundam kit too, MUST BUY item!!

• The long-awaited Crossbone Gundam X-1 finally joins the 1/144-scale HGUC series! 
  
• Rocketing out of the manga Mobile Suit Crossbone Gundam, protagonist Suit Crossbone X-1 is incarnated as an HGUC kit! Adopting the high standards found in the All Gundam project, the X-1 features accurate proportions and colors, tons of weapons, easy assembly, and a wide variety of movement.
  
• Facial vents reproduced with extra parts.
  
• X thrusters attach to the rear of the body to form the high-powered core fighter.
  
• Zan Saber and Buster Gun combine to form Zanbuster weapon! 
  
• Accessories: Buster Gun x1, Zan Saber x1, Brand Marker x2, Heat Dagger x2, Heat Dagger (Soles) x2, Beam Shield, Beam Saber x2, Core Fighter Body x1