Price Clear







Showing Gundam Parts product(s)

Showing 121 - 150 of 1224 products

img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Zeta Gundam

[Da Lin] Water Decal for RG 1/144 Zeta Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Zeta Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM3.10

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam Astray Gold Frame Amatsu Mina
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM17.90
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Unicorn Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Sinanju

[Da Lin] Water Decal for RG 1/144 Sinanju


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Sinanju Gundam Water Decal
-- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong 

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Full Armor Unicorn Gundam

[Da Lin] Water decal for RG 1/144 Full Armor Unicorn Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Full Armor Unicorn Gundam
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Gundam Astray Red Frame

[Da Lin] Water Decal for RG 1/144 Astray Red Frame

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Astray Red Frame
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Gundam 00 Qan[T]

[Da Lin] RG Gundam 00Q Water Decal (RG06)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam 00 Qan[T] Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM13.00

[Da Lin] Dragon VFin for PG Astray Blue Frame - Ver 1.5

Enhance your Astray Blue Frame with the special design Red Dragon Vfin

Brand : Dalin
Grade : PG
Scale : 1/60
Color : Blue

Suitable for Dragon VFin for Astray Blue Frame
Note : Gundam Kit is not included.

RM22.00
img
SAVERM9.90

[003] HGBD:R 1/144 Marsfour Weapons

A weapon set for Mars for Gundam appears from [Gundam Build Divers Re: RISE], which will be distributed on the Gundam channel from October 2019!

-Equipped with a gimmick that changes into a larger weapon by combining two large arms and two armed arms consisting of a large sword.
-You can complete the Mars for Gundam by combining it with the separately sold Core Gundam and armored parts for Mars for Gundam.
-In addition to the core Gundam, it is also possible to equip the existing modeler of 1/144 scale. You can enjoy the existing HG enhancements and a wide range of customization.
-Original joint parts included.

[accessories]
* Joint parts x 1
* Foil seal x 1

RM26.00
img
SAVERM9.90

[002] HGBD:R 1/144 Veetwo Weapons

A weapon set for Vitoroo Gundam appeared from [Gundam Build Divers Re: RISE], which will be distributed on the Gundam channel from October 2019!

-You can complete the Vieux Gundam by combining it with the separately sold core Gundam and armored parts for Vieux Gundam.
-A large beam bazooka can be created by combining the short rifle for core Gundam sold separately.
-In addition to the core Gundam, it is also possible to equip the existing modeler of 1/144 scale. You can enjoy the existing HG enhancements and a wide range of customization.
-Original joint parts included.

[accessories]
* Joint parts x 1
* Foil seal x 1

RM26.00
img
SAVERM4.70

Twin Base Gundam Stand - Suitable for 1/44 and SD (Clear)

Basic Gundam Stand for 1/144 scale or SD gundam (Clear Color)


- Suitable for BB, SD, SD Ex-Standard - Can fit 2 Gundams kit in 1 base

RM5.20
img
SAVERM7.10

[VT] Action Base VT-111 MG/RG/HG (White)

[Third Party] Action Base 5 MG/RG/HG (White)

RM12.80
img
SAVERM7.10

[VT] Action Base VT-111 MG/RG/HG (Clear Red)

[Third Party] Action Base 5 MG/RG/HG (Clear Red)

RM12.80
img
SAVERM7.10

[VT] Action Base VT-111 MG/RG/HG (Black)

[Third Party] Action Base 5 MG/RG/HG (Black)

RM12.80
img
SAVERM7.10

[VT] Action Base VT-111 MG/RG/HG (Clear Green)

[Third Party] Action Base 5 MG/RG/HG (Clear Green)

RM12.80
img
SAVERM7.10

[VT] Action Base VT-111 MG/RG/HG (Clear Blue)

[Third Party] Action Base 5 MG/RG/HG (Clear Blue)

RM12.80
img
SAVERM8.00

[Third Party] Triple Stand Action Base MG/RG/HG (White)

[Third Party] Triple Stand Action Base MG/RG/HG (White)

RM20.00
img
SAVERM8.00

[Third Party] Triple Stand Action Base 4 MG/RG/HG (Black)

[Third Party] Triple Stand Action Base MG/RG/HG (Black)


- This is non-Bandai product 
- Suitable for 1/144 or 1/100 Scale Gunpla Model 
- Can put 3 Gundam its in 1 base 
- Made by PVC Plastic 
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base 
- Size: 18.5x21x21cm
- Three colors for selection 
  • Black 
  • White 
  • Clear

RM20.00
img
SAVERM8.00

[Third Party] Triple Stand Action Base MG/RG/HG (Transparent)

[Third Party] Triple Stand Action Base MG/RG/HG (Transparent)

RM20.00
img
SAVERM22.90

DIY Collection Figures Stage (M Size)

M Size Collection Figure Stage

- Stage Size : Tall 15cm , Length 27cm , Deep 18cm
- 3 Layers Acrylic Plate Design
- DIY , Easy assembly
- Transparent Acrylic 
- Suitable for Action Figures display

3 sizes for selection

RM25.00
img
SAVERM15.90

[VT] DIY Collection Figures Stage (S Size)

S Size Collection Figure Stage


- Stage Size : Tall 15cm , Length 20cm , Deep 18cm
- 3 Layers Acrylic Plate Design
- DIY , Easy assembly
- Transparent Acrylic 
- Suitable for Action Figures display

3 sizes for selection

RM20.00
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (B10, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.70

Showing 121 - 150 of 1224 products