• Home
  • Showing Other Series Kits product(s)

Showing Other Series Kits product(s)

Showing 1411 - 1440 of 2342 products

Quick View
img
SAVERM12.90

[Pokemon] Plastic Model Collection Quick!! 01 Pikachu

- Easy and simple assembly! A new brand [Pokepla Quick!!], perfect for your first plastic model experience, is here!

- A Pikachu with a total length of about 75 mm that can be made with all 15 parts.
- Pursuit of good modeling that can be done because it is a fixed pose.
- Easy assembly and colorful finish with carefully selected parts division.
- Simple specification that you can think of the finished product the moment you see the runner.
- Touch gate method that does not use tools.
- Minimal use of seals.

[accessories]
- Foil seal x 1

RM26.00
RM26.00 Request Stock
Quick View
img
SAVERM109.50

[Different Dimension Heavy Work] Official SNK License - [KOF 14] Naklulu Machine Girl [Second Batch]

  • [Different Dimension Heavy Work] Official SNK License - [KOF 14] Naklulu Machine Girl
  • Material?ABS
  • Figure Height?Around 14cm
Package Content?
  • Body x 1
  • Guardian Eagle Mamahaha x 1
  • Back Pack x 1
  • Laser Blade x 1
  • Treasure knife x 1
  • Painted Face Emotion x 4
  • Hand gesture x 6 pair
  • Action Base x 1
  • Auxiliary bracket x 1

RM190.00
RM190.00 Request Stock
Quick View
img
SAVERM80.00

[Dimension Studio x Model Principal] A.T.k Girl - 1/12 Azure Dragon Armor / Qing Long

[Dimension Studio x Model Principal] A.T.k Girl - 1/12 Dragon Armor

Brand : [Model Principal] 
Series : A.T.K Girl Series
Scale : 1/12

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM80.00

[Dimension Studio x Model Principal] A.T.k Girl - 1/12 Phoenix Armor

[Dimension Studio x Model Principal] A.T.k Girl - 1/12 Phoenix Armor
Brand : [Model Principal] 
Series : A.T.K Girl Series
Scale : 1/12


- A new Suzaku will appear in the 1/12 scale ATK girl.
- Not only 3 types of tampo printed face parts, but also raw face parts are included.
- If you use a special decal, you can make it with your favorite expression!
- If you use the attached display stand, you can enjoy flying in the air.
-Not only joint parts but also armed parts have a wide range of movement, so fine movements can be reproduced.

- Completion size: Approximately 16.5 cm

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM130.00

[Demon Slayer] Kimetsu no Yaiba: Giyu Tomioka Water Breathing FiguartsZERO PVC Figure

Giyu Tomioka joins the Figuarts ZERO figure lineup from Bandai! In a dynamic pose, he's seen performing the Water Breathing attack; the splashing water effect parts around him add a real sense of motion to the figure. Details like his calm expression, the kimono pattern on his sleeve and the kanji on the blade of his sword will make this figure really stand out wherever you display it -- order yours today!

RM320.00
RM320.00 Ask Availability
Quick View
img
SAVERM69.40

S.H.Figuarts Ultraman Zero (Completed)



The mighty Ultraman Zero returns to Bandai's S.H.Figuarts lineup! He comes ready for battle with his Zero Twin Sword, Zero Slugger, Color Timer, and plenty of optional hands for all your posing needs. An optional Zero Twin Shoot part is also included. Order today!

Contents :
  • Main figure
  • Interchangeable head part
  • Color Timer
  • Zero Twin Shoot 
  • Interchangeable left arm
  • Interchangeable hands (x5 left, x6 right)
  • Zero Slugger (x2)
  • Zero Twin Sword

RM260.00
RM260.00 Ask Availability
Quick View
img
SAVERM63.80

[01] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS KENBU

??In commercialization, the main character was made into a three-dimensional model after structural verification for actually designing a 10m class aircraft by KEN OKUYAMA DESIGN.

--AMAIM (Amain) equipped with I-LeS (Autonomous Thinking AI) assembled with the autonomous thinking AI guy that Amou who was collecting junk parts met.
-Equipped with a cylinder gimmick on the chest. Action poses with the attached armed sword and cannon can also be reproduced in a wide range of motion.
-The head camera parts are composed of 3 sides on one side, and the shape is reproduced in detail even on 1/72 scale.
--Equipment for reproducing the unfinished state of the right shoulder and left arm can also be attached.

[accessories]
? 60mm carrying cannon x 1
? Super heat-shaking combat straight sword x 1
? Shielded dagger x 1
? Weapon rack x 1
? Hand parts Flat hand (left and right), weapon holder (left and right), gun holder (right)
? A set of parts for reproducing the unfinished state
? Seal x 1

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM89.60

[DIGIMON SERIES] Figure-rise Standard Amplified Imperialdramon

-From [Digimon Adventure 02], [Imperialdramon], which can be transformed in two forms, is now available as an AMPLIFIED arranged plastic model!

--Cooperation with official designer Kenji Watanabe.
-[Fighter mode] and [Dragon mode] can be reproduced by replacing and expanding and contracting each part.
-Reproduce the coloring just by assembling.
-Comes with a special weapon, Positron Laser.

[accessories]
* Positron laser x 1
* Foil seal x 1

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM89.60

[SAKURA WARS] HG 1/24 Spiricle Striker Mugen (Claris Type)

-From [New Sakura Wars], [Reiko Fighter Mugen (Claris Machine)] is lined up in HG

--Equipped with an open gimmick in the cockpit hatch.
-Adopted an extension gimmick that expands the range of action poses for the joints of the hands and feet. The limbs can be expanded and contracted.
-Comes with a closed spellbook and an open spellbook.
--The opened page of the spellbook is reproduced by cutting out the instruction manual.
-Comes with a character figure on board.

[accessories]
* 2 types of spellbooks (closed spellbook, open spellbook)
* Foil seal x 1
* Jewel seal x 1
* Water slide decal x 1

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM107.60

RG Multipurpose Humanoid Decisive Weapon, Artificial Human Evangelion Unit-08a

- [Evangelion New Theatrical Version: Q] Unit 8 ? that appeared at the beginning is now available from the RG brand!

- Pursuing the reproduction of natural action poses as a human being based on the setting in the play [Android].
- Achieves human-like mobility such as [spine movement] and [arm twist].
- Comes with a super long-distance rifle that appeared in the play.

[accessories]
* Ultra long-distance rifle x 1
* Progressive knife x 2
* Palette rifle x 1
* Umbilical cable x 1
* Realistic decal x 1
* Hand parts (left and right) x 7 types each, handle for ultra-long-distance rifle x 1 set

RM162.00
RM162.00 Request Stock
Quick View
img
SAVERM73.80

[05] [Kyokai Senki / Boundary Fighter] HG 1/72 MAILeS REIKI

-From [Borderline fighter], AMAIM [Reiki] equipped with I-LeS (autonomous thinking AI) is commercialized!

-AMAIM has been three-dimensionalized after verification of the movable structure by KEN OKUYAMA DESIGN.
-Shiobe Zion boarded as a pilot.
-In addition to the deployment of the large rear skirt, the thruster unit equipped on the whole body can rotate.
-A taser launcher (provisional) and a super-heated halberd sword are included.

[accessories]
? Super heat-shaking Naginata x 1
? Taser launcher (provisional) x 1
? Hand parts x set
? Seal x 1

RM70.00
RM70.00 Request Stock
Quick View
img
SAVERM19.90

[Battleship Yamato] Mecha Collection 06 Czvarke & Desvatator U.N.C.F. Space Battleship Yamato 2202

Start building your fleet of the main battleships from "Space Battleship Yamato 2202" with this Mecha Collection set! Although small in size, these kits are loaded with detail, and waterslide decals are included too. You get one of the flagship space battleships from the Yamanashi Fleet, and one of the ships from the Mars Defense Line. Bases are provided, and the instructions are printed on the inside of the lid of the box.  Order yours today!

[Includes]:

  • Display base (x2)
  • Waterslide decals

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM44.00

S.H.Figuarts Son Goku -DAIMA-

SON GOKU" from "Dragon Ball DAIMA" is now available at S.H.Figuarts.

The character is completely newly sculpted S.H.Figuarts to match the character design as it appears in "Dragon Ball DAIMA"!

Height : Approx. 145mm
Material : PVC, ABS
Content : 
- Main Body
- 3 pairs of interchangeable hands
- 3 interchangeable face parts
- Interchangeable head parts
- Interchangeable uniform parts

RM186.00
RM186.00 Ask Availability
Quick View
img
SAVERM49.70

S.H.Figuarts Kamen Rider Revi Rex Genome (First Production)

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] is now available in SHFiguarts at the first production limited price!

-High quality [SH Figuarts Kamen Rider Revere Rex Genome] that expresses the vivid metallic pink and metallic blue of [Masked Rider Revere Rex Genome] with coloring and also incorporates the gimmick of the belt is now available at the first production limited price!

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] will be released at the same time as his partner [Kamen Rider Revice Genome] at SHFiguarts!
-The belt's [Revice Driver] has a built-in movable gimmick, which allows you to reproduce the action of tilting the bi-stamp like a lever and the action of rotating the stamp stamping surface!
-Multiple replacement wrists are attached, and various impressive poses in the work are expressed with SHFiguarts!
-The wide range of motion that SHFiguarts is proud of allows you to take action freely!
-A wrist that can hold the [Oin Buster 50 (Ax Mode / Gun Mode)] that comes with the separately sold [SHFiguarts Kamen Rider Vice Rex Genome] is also included!

[set content]
? Main body
? Replacement wrist left and right 4 types each

RM160.00
RM160.00 Ask Availability
Quick View
img
SAVERM4.00

[Infinite Dimension] MG 1/100 In Era+ UMD Trailblazer Integrated Tactical Assault Squad Model Kits / In Era + Ultimate Minuti

In Era+ UMD Trailblazer Integrated Tactical Assault Squad Model Kits / In Era + Ultimate Minutia Designs

- Scale : 1/100
- Material : Alloy and ABS Plastic
- Brand : Infinite Dimension
- Fully articulated

Box Content : 
- Pieces to build
- Trailblazer figure
- Sword
- Four fin blasters
- Heavy blaster
- Manual Book

RM176.00
RM176.00 Request Stock
Quick View
img
SAVERM40.00

S.H.Figuarts Ichigo Kurosaki -Bankai Tensa Zangetsu- (BLEACH)

Ichigo Kurosaki from "BLEACH" joins the S.H.Figuarts action-figure lineup from Bandai based on his appearance in the "Thousand-Year Blood War" arc!

Ichigo's design has been fully preserved in action figure form, with soft parts used for the outfit to pose the legs more freely, and movable joints throughout the figure to allow for a variety of poses.

The zanpakuto Tensa Zangetsu is included, and the chains are made from actual iron chains for a more authentic look. A variety of facial expressions are included, including a relaxed expression and more that allow you to recreate various scenes from the show.

Height: Approx. 155mm

Material: PVC, ABS

Set Contents:

Main figure
  • Interchangeable facial parts x4
  • Interchangeable hands (3 types)
  • Tensa Zangetsu


RM280.00
RM280.00 Ask Availability
Quick View
img
SAVERM69.60

S.H.Figuarts Kamen Rider Vice Rex Genome

-[Masked Rider Revice Rex Genome]'s companion, [Masked Rider Vice Rex Genome] will be released in the same month as SHFiguarts!

-[SHFiguarts Kamen Rider Revice Rex Genome] will be released at the same time as [SHFiguarts Kamen Rider Revice Rex Genome]! [Oin Buster 50] that can be used not only for the muffler and tail to move, but also for [SHFiguarts Kamen Rider Revice Rex Genome] (sold separately) comes with 2 types of gun mode and ax mode!

--From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Genome], the transformation of [Kamen Rider Revice]'s companion demon, is now available in SHFiguarts !
-Weapon [Oin Buster 50] comes with 2 types of gun mode and ax mode! It is also possible to have it in the separately sold [SHFiguarts Kamen Rider Revice Genome]! Further! [Megalodon by Stamp] is included! [Kamen Rider Revice] series comes with bi-stamps one after another!
-With abundant replacement wrists, you can express the poses of Kamen Rider Vice showing various expressions!
--The characteristic muffler and tail are made of soft material. Since joint parts are also included at the base, you can move freely according to the action!
-[Kamen Rider Vice] that takes free action even in the play is three-dimensionalized with a wide range of motion like SHFiguarts!

[set content]
? Main body
? Replacement wrist left and right 4 types each
? Oin Buster 50 (Gun Mode)
? Oin Buster 50 (ax mode)
? Megalodon by stamp

RM200.00
RM200.00 Ask Availability
Quick View
img
SAVERM68.70

ZD [Zhong Dong] 7 inch 1:9 Scale Iron Man Mark XLII Mark 42

  • [Zhong Dong] 7 inch 1:9 Scale Iron Man Mark XLII Mark 42
  • Package comes with Real-like thrust fire effect accessories + Damashii Action Base.

RM99.00
RM99.00 Request Stock
Quick View
img
SAVERM268.60

SAINT CLOTH MYTH EX PHOENIX IKKI [FINAL BRONZE CLOTH]

The final version of SAINT CLOTH MYTH and Bronze Saint Cloth is finally the 5th. An immortal man, Phoenix Ikki, is here! The blue metallic shining sacred clothes can be replaced with an objet d'art.

RM570.00
RM570.00 Ask Availability
Quick View
img
SAVERM17.90

Entry Grade Kamen Rider Saber

Kamen Rider Saber is now available in the introductory series "ENTRY GRADE" for all inexperienced plastic models!
? Because it is a touch gate, you can take the parts by hand with "Petit!"!
? Although the number of parts is simple (about 36 parts), the characteristic color coding of each part is firmly expressed.
? Two types of right hands, a hand holding a sword and a fist, are included, and you can enjoy changing them!
? No adhesive or tools required. The instructions are colored for easy viewing.

RM42.00
RM42.00 Request Stock
Quick View
img
SAVERM36.70

[Demon Slayer] Figuarts Mini Kyojuro Rengoku (PVC Figure)

Release Date : Jan 2021
Estimate Delivery  : Feb 2011

Prototype image. Actual product may vary.
Copyright Koyoharu Gotouge/Shueisha/Aniplex/ufotable
Height: approx 90mm.

- Figuarts Mini Kyojuro Rengoku (PVC Figure)

RM125.00
RM125.00 Ask Availability
Quick View
img
SAVERM15.00

JH Girl [JIANG HUN JI] Seven Deadly Sins Gluttony SIN-0

Brand : JH Girl [JIANG HUN JI]

Series : Seven Deadly Sins
Model : Gluttony, come with Throne of the Pharaoh with Illumination
Material : ABS
Type : Model Kits




RM265.00
RM265.00 Request Stock
Quick View
img
SAVERM59.30

[Demon Slayer] Figuarts Mini Shinobu Kocho (PVC Figure)

-The charm of the character is condensed into a palm-sized deformation. A deformed arrangement figure series featuring lively eyes and simple movement.

-Point1. Lively eyes
Glittering EYE's three-dimensional shape and glossy coloring give it a lively presence.

-Point 2. Reproduce an impressive pose
Includes replacement arm parts that allow you to take an impressive pose with the character's individuality!

-Point3: Neck, shoulders and legs are movable
The neck, shoulders, and legs are movable, so you can enjoy standing and posing like each character.

-set content
?Main body
?Replacement arm parts left and right
?Pedestal

RM102.40
RM102.40 Ask Availability
Quick View
img
SAVERM25.00

[ZA] 1/72 Scale SF95-001 Murasame Liger Zoids Lion Model Kit [Limited Ver. Transparent Blue and Green Outer Armor]

[ZA] 1/72 SF95-001 Mugen Liger Zoids Lion Model Kit 
[Limited Transparent Blue and Green Outer Armor]

Limited Edition
- Free Water Decal

RM150.00
RM150.00 Request Stock
Quick View
img
SAVERM37.40

ENTRY GRADE IZUKU MIDORIYA Model Kits

  • From the anime series My Hero Academia comes an easy-assemble model kit of Izuku Midoriya that requires no glue, no paint, or even tools to assemble! Parts twist off and snap together creating an amazingly detailed figure when assembled. 
  • 4.72 inches (12cm)
  • Made of plastic
  • From My Hero Academia 
  • Easy to build
  • Requires no glue, tools, or paint
  • Instructions may or may not include English translation

RM52.50
RM52.50 Request Stock
Quick View
img
SAVERM41.70

Figuarts mini Sagiri Yamada Asaemon (Hell's Paradise: Jigokuraku)

Sagiri Yamada Asaemon from "Hell's Paradise: Jigokuraku" is the newest member of Bandai's "Figuarts Mini" lineup! She's a compact 9cm tall, super-cute, and comes with interchangeable arm parts and her sword, as well as a base. She's posable at the neck, shoulders and legs, too. Order her for your own collection today!

[Figure Size]: Approximately 9cm tall
[Materials]: PVC, ABS

[Set Contents]:
* Main figure
* Interchangeable arms, left and right
* Sword
* Base

RM120.00
RM120.00 Ask Availability
Quick View
img
SAVERM100.00

Figuarts ZERO [EXTRA BATTLE] SUPER SAIYAN 3 SON GOKU -Dragon fist explosion-

  • Figuarts ZERO [EXTRA BATTLE] SUPER SAIYAN 3 SON GOKU -Dragon fist explosion-

RM550.00
RM550.00 Ask Availability
Quick View
img
SAVERM45.80

[Heavy Metal L-Gaim] L-Gaim (HG)

From Heavy Metal L-Gaim, El Gaim has upgraded to the HG series!
- Adjusted the balance of the head parts and changed the thigh parts division. More stylish.
- The shoulder has been changed to a ball shaft to improve mobility.
- It is possible to pull out the arm back and forth with new parts.
- Buster launcher is created with a new mold to improve color coding.
- New joint parts that can be attached to Action Base 5 are included.

[Accessories]
- Buster Launcher x 1
- Power Launcher x 2
- Shield x 1

RM92.00
RM92.00 Request Stock
Quick View
img
SAVERM139.30

Figure-rise Labo Shikinami Asuka Langley

Figure-rise LABO series that challenges new expressions of plastic models. The fourth research theme is Expression of transparent suits that are in close contact with the skin!
From the movie Evangelion: 2.0 You Can (Not) Advance comes Asuka wearing a test plug suit for the Eva Unit 3 boarding test!
- Body expression with shadows that make full use of molding technology.
- The clear orange part of the suit that adheres to the skin is reproduced by special molding of about 3 mm to about 0.3 mm at the thinnest part. Pursuing an overwhelming sense of reality by superimposing materials selected with thorough attention.
- Eye tracking injection (insert molding of the pupil) realizes the tracking of the line of sight as if Asuka was staring at us.
- Molds are processed in consideration of the properties and texture of various parts that overlap intricately.
- The prototype is a collaboration with ALTER.

[Accessories]
- Display base x 1
- Marking sticker x 1

RM280.00
RM280.00 Request Stock
Quick View
img
SAVERM58.90

[Kamen Rider] Figure-Rise Standard Kamen Rider Kuuga Mighty Form (Decade Ver.) Model Kit

  • [Kamen Rider] Figure-Rise Standard Kamen Rider Kuuga Mighty Form (Decade Ver.) Model Kit
  • From Bandai Hobby. Collect Kamen Rider Kuuga as seen in the TV series Kamen Rider Decade! 
  • Features Metallic coated parts and new Sealing Sigil stickers. 
  • Includes display stand.

RM132.80
RM132.80 Request Stock

Showing 1411 - 1440 of 2342 products