[Includes]:

• Interchangeable faces (x4)
• Handgun
• Gun
• Axe
  
• Interchangeable hands (x7)

• From Idolmaster Shiny Colors, Antica's "Tsukioka Kokane" is turned into a 3D figure in 30MS format! This is an all-in-one item that includes parts for the entire body.
• Three types of facial parts with tampo printing are included. The color coding inside the mouth is reproduced by dividing the parts. The bangs can be reproduced without the hair accessory by replacing the parts.
• The chest parts of the costume are made of parts that have been pushed to the limit, and simply by assembling them as they are, you can reproduce the colorful color coding and precise details. The small wings on the back are also reproduced in the shape of the parts.
• The heart on the chest is expressed with a clear texture using a plastic sticker.
• The skirt is expressed with a wavy shape using a sheet with a printed pattern. Some parts are
• made of smoked clear material with glitter. The skin parts are finished with a matte finish on the mold surface, which gives them a soft light reflection.
• In addition to the hand parts with facial expressions, three types of hand parts that can hold a microphone are included.

• 3 types of face parts (tampo printing)
• 1 set of hand parts
• 1 bangs part (without hair accessory)
• 1 microphone
• 1 sticker

• Introducing a new, highly versatile optional body part that can be combined with the 30MS series!
• Original 30MS design by Fumikane Shimada. A set of [Color A] body units including the distinctive "costume", "arms and legs", and "hand parts". The hand parts come with a grip that can hold a microphone.
• Can be combined with the existing 30MS series, including the separately sold "30MS Tsukioka Kokane".
• Chest parts are selectable and come with two different designs.
• Selectable [Color A] body parts are included for the abdomen.
• The leg binder can be unfolded to create a display that resembles a flying pose.
• 3mm holes and pins for joints are installed in various places on the costume, allowing you to create characters by combining it with other series products.

• From the "Super Robot Wars OG" series, the long-awaited Gunleon, which can be transformed into Magna Mode by replacing parts, is now available!
• Magna Mode can be recreated by transforming each part and replacing parts.
• A wide variety of weapons are included, including the Riot Jarenti, which is about 230 mm long, which is longer than the full length of the unit.
• Part of the Riot Jarenti can be deployed and transformed into Magna Mode.
• The Gigg Gun can be stored in the variable boom on the back, and the Decker Spanner can be stored in the leg.
• Jewel stickers are used on the red part of the waist, and plastic stickers are used on the black and orange parts on the side of the Chain Decutter.
• Action Base 7 is included to expand the range of poses.

• Decker Spanner x 2
• Riot Jarenti x 1
• Gig Gun x 2
• Chain Decutter deployed state parts x 1 set
• Selectable parts for head x 1 set
• Magna Mode parts x 1 set
• Hand parts x 1 set
• Action Base 7 x 1
• Plastic sticker x 1
• Jewel sticker x 1 
• Sticker x 1

• Ultraman Tiga Multi Type" from "Ultraman Tiga" is now available in the Figure-rise Standard series!
• The distinctive body color is reproduced by dividing the parts, and can be assembled without stickers.
• The color coding is thoroughly reproduced, from the ears and back of the head to the clear forehead.
• Effect parts that reproduce the charging/firing of the Zeperion ray are included.
• Dynamic action poses can be reproduced with multiple movable axes built into the body.
• The head movement is improved by the neck part going inward.

• 1 set of effect parts for Zeperion ray
• 2 types of color timer
• 1 set of hand parts

• The popular 30MM optional parts set now includes a "Wing Unit" that can be attached to a variety of aircraft!
• Various variations can be created by connecting the parts together.
• By using the separately sold "Action Base 7", you can recreate the flying state of the unit on its own.
• By using the included joint parts, the unit can be attached to a variety of aircraft.
• Each connecting point is movable, allowing for expression.
• The unit can be separated and used as a customizable part.

• 1x Wing Unit
• 2x Joint Parts

• The runner parts are arranged in a way that is easy to assemble and allows for easy work flow, and is "optimal" to allow for smooth assembly.
• In addition to two unprinted face parts, two types of head parts (FP-I type) are included. By combining with the "30 MINUTES SISTERS Water Transfer Decal Universal" (sold separately), you can create expressive characters!
• Hairstyle parts and headgear parts are included, and two types of chest parts are included as a choice.
• The visor part is reproduced with a clear green PET sheet.
• The "30 MINUTES SISTERS" lineup includes face parts, hairstyle parts, and body parts for each part. You can create your own sister by combining them with separately sold parts.
• Uses 3mm joints common to the 30 MINUTES series. "30 MINUTES MISSIONS" parts can also be installed as options. (? The target age for the "30 MINUTES MISSIONS" kit is 8 years old and above)

• Body parts x 1 set
• Chest parts (interchangeable) x 2 types
• Joint parts x 1 set
• Unpainted face parts x 2
• Head parts x 2 types
• Hairstyle parts x 1
• Neck parts x 1 set
• PET sheet x 1

• A set of hairstyle parts and face parts for "Mitsumine Yuika" and "Yuya Kiriko". You
• can change the idols into various costumes by combining with the separately sold 30MS optional body parts.
• The delicate flow of the hair is carefully three-dimensionalized, and the fluttering movement is expressed according to the pose.
• The hair accessory can be attached and removed according to the design of the costume. By attaching and removing the parts, it is also possible to reproduce the state without the hair accessory.
• Mitsumine Yuika's front hair part comes with glasses parts molded as one with the hair. It can be removed.
• Yuya Kiriko comes with a right arm and right leg with a bandage design. The bandages on the left arm and left leg are reproduced with three-dimensional stickers.
• Two types of facial parts are included, each with tampo printing.
• It can be combined with the separately sold "30MS Optional Body Parts Beyond the Blue Sky 1 [Color A]", "30MS Optional Body Parts Alpha Sisters Phantasm 1 [Color A]", and "30MS Optional Body Parts Sigma Sisters Paradox 1 [Color A]".

• Mitsumine Yuika face parts (tampo printing) x 2 types
• Yuutani Kiriko face parts (tampo printing) x 2 types
• Yuutani Kiriko (bandaged arm and leg parts) x 1 type each
• Hairstyle parts x 1 set each
• Sticker x 1

• From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Class Up Armor (Liberal Warrior)"!
• A set of armor and weapons that can be "classed up" to a higher-level job by using "Armor Cross" [armor replacement].
• By combining it with the separately sold "30MF Liberal Fighter," it is possible to "class up" to "Liberal Warrior."
• A "Warrior" is a job for professional fighters with high combat skills and a powerful physique.
• A different face design and coloring from the "Warrior" of the Rozan Empire, sold separately.

• 1 set of armor parts
• 1 set of weapon parts

• Godzilla in a dynamic pose is recreated in 3D with a skeleton designed by Shinji Nishikawa and an exoskeleton reproduced from the movie! This display model has been designed with a detailed organic and high-density exoskeleton and skeletal structure.
• You can choose between two display methods: "stored inside the body" or "side by side with the exoskeleton".
• The distinctive skeletal parts are produced by Shinji Nishikawa, who has participated in almost all Godzilla movies in terms of monster and mecha design, as well as providing settings and direction plans. Expresses the dynamic undulations of the bones to match the pose. The realistic bone form is recreated in 3D with attention to detail in the structure.
• Reproduces the natural undulations of the body from the tip of the face to the tip of the tail. The exoskeleton is designed to make the seams of the parts, which are unique to non-movable models, less noticeable.
• The color coding of the mouth is reproduced by dividing the parts.
• Clear parts are used for the joints of the dorsal fin.
• Two types of support parts are included to support the large body.

• 2 types of dedicated supports

• Silence Suzuka from Uma Musume Pretty Derby is now available as part of the Figure-rise Standard series!
• The skirt can be divided into front and back parts to ensure a large range of motion. It can also accommodate spreading movements, and the figure can be run in a forward leaning position without breaking the silhouette.
• Three types of facial parts with different expressions are included. The smiling eyes are reproduced with tampo printing. The other two types use water transfer decals.
• By pursuing the structure on a part-by-part basis, a colorful competition suit can be created just by assembling it.
• The head is effectively divided into parts. The color-coded ears, hair, headbands and accessories that can be given expressions are also expressed in detail.
• The upper body can be bent to reproduce a dynamic running look. The tail can also be flexibly moved.
• The horseshoes on the soles of the shoes are reproduced with stickers. By dividing the front and back of the shoes, the figure kicking the ground can be flexibly expressed.
• Four types of hand parts with expressions are included, left and right.
• A clear molded pedestal (Action Base 6) is included. The support can be connected to the back to hold the body in a running pose.

• Facial expression parts (tampo printing) x 1 type
• Facial expression parts (water transfer decal) x 2 types
• Hand parts x 1 set
• Pedestal x 1 set
• Water transfer decal x 1
• Sticker x 1