Price Clear







Gundam Model Kits

Showing 1021 - 1050 of 2612 products

img
SAVERM31.90

[024] HGUC 1/144 RMS-141 Xekueins Gundam

  • The RMS-141 Xeku Eins (Type 3 Armament) is a heavy attack version of the Xeku Eins. Originally intended for attacking and defending space fortresses, this type is armed mainly with projectile weapons. Its main weapon is a large 120mm machine gun with a rate of fire of 360-540 rounds per minute, and it carries roughly 6,000 rounds of ammunition in each of the huge drum magazines attached to its shoulders. The mobile suit is also equipped with a pair of shields that connect to the movable frame mounts in its shoulders, and these shields in turn provide beam saber racks and latches for optional equipment such as clay bazookas, bazooka magazines, and smoke dischargers. This is effectively the standard configuration of the Xeku Eins. The pilots of the instructor corps use this version to wipe out the regular Federation Forces mobile suits stationed at Pezun, and after declaring themselves the New Desides, they continue using it throughout the Pezun Rebellion of UC 0088.

RM64.00
img
SAVERM29.90

[033] HG 1/144 Kyrios Gundam Trans-Am Mode

GN-003 Gundam Kyrios Trans-Am Mode
Item Size/Weight : 31 x 19 x 7.2 cm / 337g

Gundam Kyrios from the first season of "Mobile Suit Gundam 00" makes a return flight back to Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Kyrios but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and can switch between MS Mode and Flight Position. Weapons include a GN beam submachine gun and a GN shield that can be converted into a claw.

RM60.00
img
SAVERM23.60

[045] HGUC 1/144 MS-14J Gelgoog J Gundam (Gelgong Jager)

  • The MS-14Jg Gelgoog Jäger (????J???????) is a variant of the standard MS-14A Gelgoog. It appeared in the Mobile Suit Gundam 0080: War in the Pocket series.
  • An upgraded model of the Gelgoog under United Maintenance Plan, one of Zeon's attempts to simplify both construction and operation of their Mobile Suits. The MS-14Jg Gelgoog Jäger, or simply Gelgoog J, featured more powerful thrusters and additional verniers. To offset the increased propellant use, it also carried a pair of large external propellant tanks on the backpack. It was primarily armed with a large beam machine gun that boasted high accuracy (in fact, the Jäger was nicknamed the Gelgoog Sniper). Like other later model Zeon Mobile Suits, it was also capable of carrying other Zeon weaponry such as the powerful bazooka or MMP-80 machine-gun. With its high performance and powerful weaponry, it was more than a match for the Earth Federations GMs and other mass-production units.

RM48.30
img
SAVERM21.90

[031] HGUC 1/144 AMX-107 Bawoo Production Type Gundam

The AMX-107 Bawoo makes its (re)appearance in 1/144 scale in the HGUC line, this time molded in green instead of red! This kit transforms from flight to fight mode just like it does in Gundam ZZ. Accessories include a beam saber and rifle as well as interchangeable hand parts.

RM50.00
img
SAVERM31.90

[155] HGUC 1/144 Gundam Ez8

New model of the popular machine from the Ova 08th MS Team features enhanced articulation and new refined proportion. Beam rifle, shield, beam saber and machine gun included. Parachute pack may be interchanged with backpack on HGUC RX79[G] Gundam.

Accessories: 
- Beam rifle
- 100mm machine gun
- Shield
- Beam saber x 2
- Parachute pack
- Hand grip for saber (left and right)
- Hand holding rifle (right)
- Fist (left)

RM64.00
img
SAVERM21.90

[158] HGUC 1/144 Base Jabber Type 89

  • Accessories: one corresponding joint action based

RM50.00
img
SAVERM30.90

[057] HG 1/144 Gundam Astray Blue Frame Second L

1/144 model of Blue Frame's second form featuring a fully transformable Tactical Arm pack which can convert from giant sword to Gatling gun modes made for the 10th anniversary of the Gundam Seed Astray manga. Also includes 2 armor Schneider k-nives and hidden foot blades and stand to help with balancing the massive sword.

Accessories: 
- Armor Schneider x 2
- Tactical Arms
- Dedicated pedestal

RM70.00
img
SAVERM119.20

MG 1/100 Gundam Age-2 Double Bullet

  • Appearing in Gundam AGE, the Age-2 Double Bullet has evolved the Age-2 designs even further! 
  • The Double Bullet, an evolution of the Gundam AGE-2 appears as an the MG! Designed with a complete inner frame and all the unique characteristics of Master Grade AGE kits.
  • Transformation mechanism is also reproduced, along with all the details you expect from a modern Master Grade kit. 
  • Twin DODS Cannons included with blade and beam parts in order to reproduce iconic scenes from Gundam AGE!
  • Includes calf missile deployment gimmick.
  • A truly gimmick-based MG, the cannon's position can be changed to be fired while being held or not, and can be separate from the shoulder mounts to be used like standard DODS Rifles. 
  • Transformation gimmick included to shift into flight mode! 
  • Also includes scale Asemu figures.
  • Accessories: Twin DODS Cannon x2, Calf Missile x2, Beam Saber x2,
  • Pilot Figure (Sitting, Standing)

RM132.70
img
SAVERM28.90

[018] HG 1/144 RX-78GP01FB Gundam Full Burnern

The RX-78GP01-Fb Gundam "Zephyranthes" Full Burnern (Often mistranslated as "Gundam "Zephyranthes" Full Vernian") is the upgraded space use version of the RX-78GP01 Gundam "Zephyranthes". It is featured in the anime OVA series Mobile Suit Gundam 0083: Stardust Memory. The unit is piloted by Kou Uraki.


The RX-78GP01-Fb Gundam "Full Burnern Zephyranthes" is a retrofit of the RX-78GP01 Gundam "Zephyranthes" with emphasis on space combat. This equipment was already completed by the time of the Gundam "Zephyranthes"' roll-out, but scheduled tests could not take place due to the damage during the battle with the Cima fleet. Though the GP01 was meant to operate in both Earth and Space, the Core Block System had to be swapped before each battle. After the GP01, still in its Earth configuration, was critically damaged in a battle with Cima Garahau, Anaheim Electronics took the remains of the Gundam and gave it a massive overhaul, creating the Gundam Full Burnern "Zephyranthes". The renovation process was completed in two days, with operational testing being carried out at Anaheim Electronics' Livermore factory.

Its armor is much more streamlined for better mobility in space, and thrusters are mounted in the legs, chest, and shoulder. The air-intakes on the chest are replaced with attitude control thrusters, with the covers expanding during use. Propellant tanks are built into the shins to further extend the operation time of the RX-78GP01-Fb. The backpack is equipped with built-in generators. Four additional thruster units are attached to the feet in the same manner as "shoes". The most noticeable addition to the GP01 are the two Universal Booster Pods on the backpack. They allow the Full Burnern to have superior acceleration and mobility when compared to other units at that time. As a result , the pilot has to contend with high G-forces due to overwhelming acceleration.

RM60.00
img
SAVERM35.90

[023] HGUC 1/144 MSA-0011 S-Gundam

The MSA-0011[Ext] Ex-S Gundam (aka Extraordinary-Superior Gundam) is an upgraded version of the MSA-0011 S Gundam that appears in Gundam Sentinel. The mobile suit is piloted by Ryu Roots.


By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

Accessories:
  • Vulcan Gun
  • Beam Cannon
  • Beam Saber
  • INCOM
  • Reflector INCOM
  • Beam Smart Gun

RM72.00
img
SAVERM24.90

[026] HGUC 1/144 MS-14Fs Gelgoog Marine (Cima Custom)

Item Size/Weight : 31.2 x 19.1 x 8.2 cm / 375g

RM64.00
img
SAVERM31.90

[043] HG 1/144 Arche Gundam

An antagonist Gundam from the second season of Gundam 00 with a large GN Buster Sword that also doubles as a massive rifle. Head and backpack unit can detach as an escape just like in the show. GN Condensors on body are replicated through translucent plastic.
  • Accessories: GN Sword x— 1, GN shield x— 1, GN beam saber x— 2

RM64.00
img
SAVERM21.70

[017] HG 1/144 Al-Saachez`s AEU Enact Custom Agrissa Type

Here's a sharp snap-fit plastic kit of Ali Al-Saachez's AEU Enact Custom Agrissa Type variable Mobile Suit that will be fully transformable upon completion! Capable of switching between MS Mode and Flight Position, this color-molded kit is packed with a blade rifle with slide-out blade, a defense rod that can be attached to either side of its arm, a sonic blade (plasma sword), and a missile launcher.

RM38.20
img
SAVERM30.60

[030] HG 1/144 Gadessa

A mobile suit used by Innovades, the Gadessa features a long range Mega Launcher cannon weapon that can unfold like in the Gundam 00 TV series second season. A display stand is included.

RM58.30
img
SAVERM23.90

[018] HG 1/144 GN-X

A high grade of the mass produced Gundams in Gundam 00. Features GN beam rifle with interchangeable barrel for long range type, beam sabers and arm mounted shield.

RM48.00
img
SAVERM23.60

[023] HG 1/144 GN-X III A-Laws Type

Action base is not included.


A refined GN-X, this unit features a new lance like weapon that can act as both a gun and melee weapon. GN pistol and GN beam sabers also included.

RM48.30
img
SAVERM39.90

[EW-7] HG 1/100 Serpent Custom

Small-scale version of the mecha from the OVA (Original Video Animation) series "Gundam Wing: Endless Waltz." Chest and shoulder hatches open. Comes with gattling guns and beam cannon (includes three versions of the hands, some for gripping weapons). Specifically designed to be able to be posed in some of the more memorable ways it was seen in the series. Snap-assembly, fully-posable and molded in color. Note, however, that many of the smaller details are NOT in their "real" colors and painting this model will make it look much better. About 12cm tall when completed.

RM80.00
img
SAVERM76.90

NG 1/60 Strike Gundam

The first entry in Bandai's 1/60 Big Scale Real Detail series, Gundam Seed's star mecha Strike Gundam launches this new line of kits in fine style!

Highly posable–even its fingers are jointed–this kit has nice detail, snap assembly, and a full-color, lavishly illustrated instruction booklet that make the assembly process a breeze. Among the niceties are a cockpit that opens to reveal pilot Kira Yamato, and side armor that opens at the hip to stow both Armor Schneider knives. The requisite beam rifle and shield are included, too.

Molded in Bandai's patented multi-gate technology which allows multiple colors on one tree. Stickers are included for the details that aren't molded in color. The parts are pre-colored, but painting will greatly enhance its appearance.

High grade, 1/60 scale Gundam SEED model kit.

RM132.00
img
SAVERM64.30
RM115.60
img
SAVERM159.60

NG 1/60 Strike Gundam SWS

This kit includes all the parts for the 1/60 Strike Gundam, previously released, but also comes with the spectacular backpack unit which turns it into the Aile Strike, as well as two other optional weapons (for Sword and Launcher) to let you play with it in a total of four different modes! 


Great engineering lets this figure duplicate some spectacular action poses, and with this many different weapons to swap in and out, you'll never run out of new things to do with it. 

Parts are for ONE robot, with numerous optional add-on systems.

RM260.30
img
SAVERM39.90

Bandai NG 1/60 RX-78-2 Gundam

Bandai NG 1/60 RX-78-2 Gundam

RM80.00
img
SAVERM25.40

Bandai NG 1/60 MS-06S Char's Zaku

Bandai NG 1/60 MS-06S Char's Zaku

RM94.50
img
SAVERM28.90

[003] HGUC 1/144 AMX-011 Zaku III Custom

HGUC 003 ZAKU III Custom


The AMX-011 Zaku III is a Mobile Suit developed by Neo Zeon as the successor to the Principality of Zeon’s MS-06 ZAKU II.

The AMX-011 Zaku III features a simplistic, versatile design with the ability to utilize optional equipment packs to serve various combat roles. Approximately 33% larger than its predecessor, it benefits from drastically improved power output and acceleration, showcasing the rapid advancements in Mobile Suit production discovered in the decade following the One Year War.

RM60.00
img
SAVERM15.90

[008] HGUC 1/144 MSM-03 Gogg

An aquatic mobile suit used by Zeon from Mobile Suit Gundam with its trade mark sharp claws. Arms can detach to recreate appearance while cruising through the ocean waters.

RM32.00

Showing 1021 - 1050 of 2612 products