• Childish adult Dom R35 appeared!
• Lal Mr. Naru new was used in the Battle of the last episode [R35] appeared to HGBF. Distinctive left and right of the shield [shield] [knuckle] reproduce the three modes of [cancer mode].
  
• Reproduce the customize the Dom to the original Dom R35 that reflects the Lal's battle style at full new.
  
• Elbows and knees of the claw can be deployed as configured.
  
• Dedicated shield may be modified into three modes. Each mode of the full reproduction.
• Dom R35 ... Lal's Gundam of. We are remodeling a unique setting called Ramba Ral the Dom is customized to a dedicated machine and receipt].
• Includes: private shield × 2, smacking (left)
  

• Accessories: beam ring × 2, beam shot gun, shield × 2
  

• The giant wings on the back can be opened via a gimmick. The wings can be unfolded and the MS can make a variety of flying poses, or the wings can be folded and stowed away. 
  
• Includes a Beam Rifle, Beam Saber and shield. 
  
• The shield can be attached to the Backpack and suspended via an extendable arm. 
  
• Both legs store butterfly knife type Beam Sabers. 
  
• Utilizing the action base (sold separately), the MS can be displayed in a dynamic flying pose. 
  
• Runner x14, Foil sticker x1, Instruction manual x1
  

• Freshly-created Freedom Gundam appears. 
  
• Its sharp style and wide range of motion enable dynamic action. Double joint system enables natural motion in the abdominal area. Legs have broad range of motion. 
  
• Shoulders can be widely moved up and down. 
  
• Includes a Beam Rifle, Beam Sabers and a Shield. Two sabers can be connected each other. Runner x12, Foil sticker x1, Instruction manual x1
  

• Initial experience vying for series 1 and 2 in HGBF !! Gundam Amazing Red Warrior appeared !! become MG
• [Gundam Build Fighters try] the appearance of surprise is in Episode 11, commercialization suit is Amazing Red Warrior of the third generation master Kawaguchi that stole the topic to the format of the latest MG also in the final story.
• The same can be a variety of poses in the play. Advent scene of 11 episodes by the wrist to the moving can be replicated!
• Shoulder booster moving to flexible.
• Missile hatch of the chest can be deployed by pressing the ribs of the back.
• Armed it can be replicated all forms. Each armed also possible to have in hand is removed.
• Accessories: dedicated bazooka, beam saber (right arm cuffs, SB-9), handgun, beam rifle shell, beam rifle Otsu, beam Gatling, pilot figures (Standing-sitting)

wing gundam series 4 in 1 gundam modelling kits

• Accessories: electromagnetic lance, Basarusodo, sheath, Night Flyer, cloak
  

• The characteristic body design, inspired by the martial arts uniform, is recreated. 
• Many clear effects parts are included to recreate scenes from the anime. 
• Each part has wide mobility and capable of making various fighting poses. 
• Abdomen can be twisted and head can be moved vertically in a wide range. 
• Action poses using the sword can be reproduced with the included various hand parts. 
• A special sword and its waist attachment parts are included. 
• Includes joint parts for your free customization. 
• Runner x11, Foil sticker x1, Instruction manual x1

• Gjallarhorn's front-line suit from Mobile Suit Gundam: IRON-BLOODED ORPHANS is here! 
  
• Add or remove the commander type's horn at any time. 
  
• The head opens, revealing intricate internal mechanisms! 
  
• Weapons include its rifle and hip-mountable battleaxe.
  
• Stock starts coming tomorrow 11/October/2015

• 1/100 grade 
• The Gundam Barbatos from Mobile Suit Gundam: Iron-Blooded Orphans arrives as a 1/100 scale kit! 
• The full details of its internal frame are recreated in a kit that's still easy to build due to a focus on simplifying parts count! 
• Weapon features include sliding parts which allow for its smoothbore cannon to be stowed or raised, as well as joints allowing its sword to be stowed on its backpack. 

From "Mobile Suit Crossbone Gundam", Space Pirate Crossbone Gundam X2 breaks that have been restored appeared in HGUC series!

From "Mobile Suit Crossbone Gundam", to commercialize Crossbone Gundam X2 modified with HGUC series.
Crossbone Gundam X2 breaks distinctive body shape and to reproduce the armed!

● X2 reproduce breaks specific body shape!
And head and blade antenna shape is different from the X1, the part of the back thrusters reproduced in the new shape.

-Head and blade antenna
Reproduce some form of head in the new shape.
Of angle of change shape at the top, blade antenna with features. Aspect design is also reproduced in the mold.

Hive thrusters
The shape of the thrusters tip is to have been large in size and reproduced in the new parts.

● Buster launcher included!
detail a dedicated large weapon Buster launcher of the Crossbone Gundam X2 breaks to be used is also included in the rich new shape.
Total length of about 150mm.

● scissor anchor other, rich comes armed. Weapon dedicated hand parts also enhance.

Comes armed: Buster Launcher / scissor anchor / heat Dagger / beam saber /
Than Buster (beam Zanba / Buster cancer) / brand marker / beam shield

A GM based on the 2.0 RX-78 frame, it features new additional detail on its internal skeletal structure and ability to choose between classic GM front skirt armor or its more contemporary appearance. Includes beam spray gun, beam saber, bazooka, shield.

P-Bandai RX-0[N] Unicorn Gundam 2 Banshee Norn [Unicorn Mode]

• Mobile Suit Gundam THE ORIGIN MSV planning [Mobile Suit Discovery] first edition appeared! Unlock the development of genealogy Gouf!
• Can be exchanged arms has become the attachment structure. Also, common specifications and attachment mechanism Mobile worker (provisional).
• Mechanism of joint Meets THE ORIGIN Zaku series, achieving high mobile performance. It can be a variety of poses. Open the chest, by the wide range of motion, such as a shoulder root, it is achieved with a high degree of freedom posing performance.
• Heat Hawk, also various armed, such as heat-rod included! A heat Hawk to be mounted on the back of the shield.
• Mobile Suit Gundam THE ORIGIN Mobile Suit Discovery and ... are deployed in the world of [Mobile Suit Gundam THE ORIGIN], mechanical of the historical research with a focus on MS that also was not revealed until this while drawing the MS development secret story It is planning.
• Accessories: heat-rod, shield, replacement Mobile worker forearm, heat Hawk (hand-held), heat Hawk (mount)

• The revised Mobile Worker piloted by test pilot & Black Tri-Star Mash in Mobile Suit Gundam Origin II: Artesia's Sorrow is now available as a bandai modelling kit for purchase! 
• Detailed molding recreates its realistic, heavy machinery-style details. 
• Legs & torso cables are made of elastomers for mobility and fine detail. 
• This kits the arms are compatible with the HG Prototype Gouf (Tactical Demonstrator), too!
• Accessories: Replacement arms (right hand), shield, smacking (right hand)
  

• Dynamic action poses can be recreated with included giant heat hawk, special base and effect parts. 
  
• Many motion gimmicks are adopted for reproducing dynamic poses. 
• Includes heat hawks, machine gun and a spare magazine. The magazine and heat hawk can be mounted on its waist. 
• Hand parts for holding weapons are included. 
• Marking stickers are included to reproduce the settings in the anime. 
• Runner x15, Tetron sticker x1, Foil sticker x1, Instruction manual x1

• "Wing Gundam Zero EW" as Real Grade featuring detail is reproduced through the utilization of actual techniques, an investigation of the settings, and a new interpretation of the properties of the machine. 
  
• The structure of the main wing is based on material technologies used in real aircraft. 
  
• Considering the heat-resistance and machine protection during atmosphere entry, the armored structure for the interior of the wings is designed using a pinnate mold. 
  
• The main wing section utilizes cutting-edge aircraft and combat aircraft technology and is designed to have a movable structure. Closely resembling a bird's wings, each section of the curved "flexible wings" is capable of moving in 3-dimensions. 
  
• The "Zero Frame", which can move by itself, is designed through consideration of the internal structure of the latest autonomous robots. 
  
• The utilization of new Advanced MS Joints permits human-like movements. 
  
• The Twin Buster Rifle Combination Mechanism can be reproduced. 
  
• Runner x9, Realistic decal x1, Instruction manual x1 
  

• Full of profound feeling MS, kit the well-tempered
• Also optional parts enhance
• A single-edged blade type has become the sheath and a set, storage is also possible.
• Knuckle guards be equipped to hand by removing from the waist.
• Accessories: rifle canon, single-edged blade type, knuckle guard × 2

• Accessories: beam rifle, early type beam rifle, shoulder Cannon, hyper bazooka, shield, beam saber 2, arms cannon fire effects, chest missile effect, chest Vulcan fire effects
  
• The first Gundam as visually re-interpreted in Gundam: The Origin features new engineering that allows it to perform amazing feats of flexibility in its torso and ankles to recreate dynamic poses never before possible. Weapons include wrist and chest mounted Vulcan cannons, chest mounted launcher, interchangeable shoulder cannon, bazooka, 2 types of beam rifles, beam sabers, and shield, New to this version are special effect parts to recreate smoke trails/muzzle flash on its small arms weapons. 
  

• Gorgeously reproduced in Pearl molding and metallic molding the image that sparkling with nanomachines that are dancing in the moonlight.
  
• The appearance shape to draw a smooth curve, and print the Mon'yo colorful colors such as butterfly wings.