Tieria Erde's personal Mobile Suit, Seravee Gundam, heads our way with cannons galore! Seravee, a smaller version of its predecessor Gundam Virtue, comes with two backpack-mounted GN Cannons, a GN Cannon on each knee, and a pair of single GN Bazooka IIs, which can be attached to the GN Cannons on its back to form Twin Buster Cannons, or combined to create a highly powerful GN Bazooka II Double Bazooka! WOW! The huge head on Seravee's back can slide open into Face Burst Mode and the two thrusters below it are flexible. The pre-colored, snap-together model is flexible due to its polycapped joints, and a sticker sheet for added detailing is included. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. Paint and glue are not needed to complete the kit. 

This Seravee Gundam High Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.

Include : GN BazookaII x 1

Include : GN Saber x 2, GN Rifle x 1, Gatling Gun x 1 Copyright Sotsu Agency / Sunrize Item Size/Weight : 31 x 19 x 7.2 cm / 337g Arios Gundam, from Celestial Being, is a fun addition to the Gundam 00 line with its ability to switch between Mobile Suit and Mobile Armor modes. It can be equipped with its GN Twin Beam Rifle, two Beam Sabers, and a GN Submachine Gun located under the cover of each wrist. When in Mobile Armor mode, the GN Beam Shields can be opened and used as a cool claw weapon similar to the GN Shield of its predecessor Gundam Kyrios. Trusty polycap joints allow the Arios Gundam to acheive some nice poses. A sheet of foil stickers and a display stand are included. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. Paint and glue are not needed to complete the kit. This Arios Gundam High Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.

High-grade version of the kit of the new, flying design from Gundam Seed. Very much in the Gundam style yet a unique design for this the the show's main character -- that "Aile Striker" removable backpack is a cool feature. Also comes with beam rifle, beam saber and "Armor Schnieder" k-nife deployable from the waist.. Aile strike Gundam includes foil stickers and a 1/20 scale, unpainted figure of the hero, "Kira Yamato."These Gundam Seed kits are made by BanDai of Japan. The instructions are in Japanese but are numbered and simple to follow - no glue is required to build these Gundam Seed models which are in colour with moveable parts and accessories. Scale 1/100.

Technology and Combat CharacteristicsThe Strike is the most versatile of the five Gundams created by the Earth Alliance's G Project. Because of its bright blue, red and white color scheme, the Strike is easily the most visually distinctive of the five (with the possible exception of the bright red-colored GAT-X303 Aegis). Using its Striker Packs, the Strike can be outfitted for all-purpose combat (Aile Strike), heavy assault (Launcher Strike) or heavy melee combat (Sword Strike). Design wise, the Strike is simply an extension of the Duel's frame, allowing for a multi-role function not featured in the Duel, Buster, or Blitz. (In fact, the Strike's Striker Pack allowed it to mimic, to variable degrees, many of the abilities of the first three mobile suits).

One of the "Mobile Suits Variations", this Gundam Astray Blue Frame (2nd level) is a groovy modified Astray with an enormous gatling gun, a huge shield, modified armour, and plenty of other weapons to help you kick royal butt on the battlefield! Molded all in colour and featuring snap-fit assembly so you can get this baby put together and on your desk (or in your display case!) in no time. Stickers are included for details. Unpainted 1/20 scale figures of Murakumo Gai and Rou Gyuul are included as well.

From Gundam Seed comes this high-grade kit of the Launcher Strike Gundam, complete with its powerful Agni impulse gun and shoulder-mounted gatling gun and gun launcher unit, distinctive beam rifle and shield, and Armor Schneider knives! This snap-assembly kit has plenty of polycaps for great posability, and is molded in color, with foil stickers for some of the details. Comes with an unpainted 1/20-scale figure of spacesuited pilot Kira Yamato!

The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

The second general and master of the bow, KOCHU (Huang Zhong) Gundam, from the new 'Dueling Gods' episode! Can be combined with its support mecha, and also formed into 'Renryuu Form' and 'Ryurin modes'! Armor can be removed to form 'light armor' mode. It includes sword, shield, bow, and 3 arrows. Archer of the dawn. A commander of Keishuu Troops. Helped the combined Shou and Gou troops together with Gien during the Battle of the Red Cliff. His armor is designed after the G-Defensor. After the Red Cliff battle on the defeat of the Keishuu army, he and Gien travelled to Shou. An old general but a highly skilled archer.

• The Efreet Custom, long popular in games and side stories, is finally a kit! 
• Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
• Translucent parts are used for its backpack-stowable heat saber. 
• Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! 
  
• Format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. 
  
• Included top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

The only Zeon MG from 08th MS Team, the Gouf Custom ditches the Gouf's close-combat weaponry for more ranged weapons. However, it retains all the elements of the Gouf including the curved spikes and a modified heat rod. The entire body has an internal frame with amazing flexibility.

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

Gundam Avalanche Exia made its debut in the "Mobile Suit Gundam 00V" side story serialized in Hobby Japan magazine, and fans can now build the powerful mech with this sharp snap-fit model kit from Bandai! Molded in color and carefully detailed after mecha designer Kanetake Ebikawa's drawings, the Mobile Suit is equipped with its high-mobility hs-A01 Avalanche along with its Seven Sword System. Its armament includes a GN Sword capable of switching into rifle mode, two GN beam daggers, two GN beam sabers, a GN long blade, and a GN short blade. The mech features sharp mechanical detailing throughout, and will be fully articulated with polycap joints upon completion. Foil stickers and marking stickers are included. Weight: 650g

Featuring the fully articulated 1/100 Chaos Gundam and can transform just like the TV series! Not only can it transform but it also comes packed with loads of unique weapons and a booklet full of artwork of both the Gundam and the pilot Sting Oakley! The helmet crest can be folded down and retracted for the Mobile Armor mode. Highly recommended for any Gundam fan!

Justice is originally built by ZAFT and piloted by Athrun Zala. Its backpack, the "Sub-flight System," is actually a support vehicle that houses a set of cannons on top and can detach and fly on its own. Like the Freedom Gundam, it is equipped with a Neutron Jammer Canceler, allowing a nuclear reactor to be used for the powerplant instead of a mere battery. This means that the Justice Gundam can operate its Phase Shift system indefinitely.

• Following the Suit's original designs, the shoulder cape and large range of motion allow this kit to fit into accurate poses and feature dynamic action! 
  
• Huge weapons split into individual elements!
• Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1
  

• Runner x24, Foil sticker x2, Marking sticker x2, Tetronic sticker x2, Instruction manual x2 
  
• "V Dash Gundam" as a fully equipped V Gundam Ver.Ka is released. Includes additional equipments such as the "Core・Booster". 
  
• Includes two V Head Core Fighters and two Hexa Head Core Fighters. The Core Fighter, Top Fighter, Bottom Fighter, Core・Booster, all four flight mode can be made with a single package. 
  
• The Overhung Cannon of Core・Booster becomes a big beam cannon by being attached onto the MS back. 
  
• Includes two beam rifles which can be attached to the hard points. 
  
• The beam cannon which is attached to the side armor, the missile pod, the two disposable buzzes on both sides are included. 
  
• Includes the gatling gun, beam javelin, beam smart gun. 
  
• Includes colored parts for foot covers for reproducing V Gundam Hexa. 
  
• Includes special joint parts for the action base.
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
•  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
•  Equipped with a movable core fighter! 
  
•  Includes Stand to display the Core Fighter.
  
•  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
• Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
• Equipped with a movable core fighter! 
  
• Includes Stand to display the Core Fighter.
  
• Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

Beautiful Master Grade version of the God Gundam, in 'Hyper Mode'. The base is Bandai's super flexible, super poseable 'Action Frame', put together with some snap-fit pieces, some screws, bolts, polycaps for joints, and some wire (Master Grade kits are much more complex than regular plastic kits) over which the armor is layered. The finished product can take on infinite 'realistic' poses as seen in the anime. Parts are gold-plated for that Hyper Mode gleam! Some stickers for detail are included, as well as a plastic 'jewel' for the Hyper Mode unit. Also included is a translucent orange plastic figure of Domon Kyasshu!

A 1/100 scale model of the Gundam Astray Gold frame, rescued from Heliopolis just before its destruction. Entire frame is finished in gold chrome. Includes parts for replicating the one-armed version as seen in the comic. Includes beam rifle, shield, two beam sabers, and the Duel Bazooka used to escape from Heliopolis.

Manufacturer: Anaheim Electronics Company Operator: Neo Zeon Unit type: mass production general purpose mobile suit Dimensions: head height 20.0 meters Weight: empty 23.0 metric tons; max gross 50.8 metric tons Powerplant: Minovsky type ultracompact fusion reactor, output rated at 2160 kW Armament: beam sword-axe, recharge rack storage location unknown, hand-carried in use; shield, mounted on left forearm, mounts 4 x grenade launcher; beam machine gun, powered by replaceable e-pac, with attached heat bayonet, 2 spare e-pacs stored on hip armor; beam machine gun, powered by replaceable e-pac, 2 spare e-pacs stored on hip armor, with optional attached grenade launcher, 1 round; 4 x sturm faust, rocket-propelled warhead, stored in shield, hand-operated or can be launched from shield Pilot: Rezin Schnyder

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.