• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• Gundam 00 Raiser condenser mode made its appearance! 
• Active character in the early 00 movies. 
• Accessories: 
• GN Sword II × 2, 
• GN Sword III, 
• shield, 
• pedestal

• Raiser + GN Sword III of the final battle specification is the product of a normal color!
  
• Effects are clear parts. GN Sword II also included of course.
  
• Sword mode rifle mode can be converted to GN Sword III.
  
• Effects blade part of GN Sword III also reproduced in clear plastic.
  
• Accessories: GN Sword III x 1, GN Sword II x 2, GN beam saber x 2, GN shield x 1
  

Not just a recolor of the 2008 1/100 GN-0000 + GNR-010 00 Raiser Special Set, this excellent release offers a third light-up LED for the Mobile Suit's head, a brand new weapon, and all parts come molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of 00 Raiser!

Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode! Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser!

A sheet of foil stickers and a sheet of designer's marking stickers are provided.

Three LED button light are included without batteries.

Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

Inspired by Zhuge Liang from the Chinese literary classic "Romance of the Three Kingdoms," Koumei Re-GZ is offered as a nicely detailed snap-fit plastic kit! He comes with a scroll and is armed with his Bakuousen fan weapon that can transform into a Bakuouki mechanical bird.

Inspired by Taishi Ci from the Chinese literary classic "Romance of the Three Kingdoms," Taishiji Dom is now a nicely detailed snap-fit plastic kit! He wields a spiked iron rod, and comes with a support mecha that can be attached to his body to provide additional armor and claw hands; they can also combine together to form a flight unit. Weight: 150g

Inspired by Guan Ping from the Chinese literary classic "Romance of the Three Kingdoms," Kanpei Gundam is now offered as a nicely detailed snap-fit plastic kit! His weapons include a pair of Kieisou arm attachments and a Kiringa guandao that can be combined with the Ouga Ryuugetsutou weapon from Kan'u Gundam (sold separately) to form a double-bladed Souki Ryoujintou!

Inspired by Cao Cao from the original Chinese epic, Sousou Gundam is nicely detailed and comes armed with his Enkotsujin sword. Foil stickers are included so painting is not required, but would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them. Weight:140g

Copyright Sotsu Agency / Sunrize Item Size/Weight : 20.4 x 15 x 5.5 cm / 170g

• All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  
• A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.
  

• More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot! 
  
• From "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses. 
  
• Weapons: 3 beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. Stickers and dry transfers are included for markings. Stands included too!
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

• Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  
• Linked movement for the caterpillar, allowing flexible movement. 
  
• Caterpillar has the feature of resistance to the surface when rotating. 
  
• Dozato Carrier in front and behind the chassis can be deployed. 
  
• Stands included to show the docking sequence of Core Fighter to Guntank. 
  
• Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  
• LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg
  

• Released Date: 2001 Well armed with two beam sabers and 12 1.3MW funnel remote beam weapons. 
  
• From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. 
  
• The shoulder armor opens just like the prototype. 
  
• Binder with accureate details and thruster. 
  
• Details opening cockpit area. 
  
•  Weight: 1kg
  

Armors can be taken off to express NADLEE version. GN cannon on the shoulders can be slided to recreate battle mode. NADLEE's hair can be moved to express movement. GN bazooka in two modes (normal and battle mode). Double joint system in arm articulations. Waist supported with axis cover parts for balanced posing. Various wrists and foil stickers included.

Here -  is the HG series kit of the Gundam Virtue in Trans-Am Mode, as seen in the first season of Mobile Suit Gundam 00. The GN cannon barrel can extend, and the connector arm is posable, allowing for dramatic shooting poses from the show. The GN cannon and leg unit sides slide to open into GN field mode. GN bazooka barrel can slide to replicate burst mode. Foil stickers are printed in appropriate colors for Trans-Am mode as well.

• A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka (Katori Version). 
  
• Includes clear "Gundam Stickers" with various in-scale warnings and markings on them. 
  
• Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (includes figures of two standing mechanics and a seated pilot).
  

• I'm going to skip obvious puns like "Bandai Strikes Gold!" and just get to the good stuff: 
  
• The Hyaku-Shiki gets the MG treatment! The results are incredible. 
  
• Bandai has engineered this piece so that the beautifully gold plated pieces have very fine sprue attachment points to make assembly easy. 
  
• Just use care in removing the numerous perfectly plated gold pieces from the tree. 
  
• As usual with a Bandai MG series everything moves via poly-cap joints. 
  
• Leg and arm armor can be removed. A beautiful kit and a real attention-getter on display.

• A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  
• No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  
• Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g
  

• Metallic coating in addition to its fantastic detail, high quality, and super posability! 
  
• The Mobile Suit is equipped with its high energy beam rifles, Super Lacerta beam sabers, beam shield, Xiphias rail guns, and its most distinctive and powerful weapon of all, the Super Dragoon mobile weapon wings, which can extend and detach from the main wing frames. 
  
• In-scale, silver-color figures of pilot Kira Yamato (sitting and standing) and Lacus Clyne are included. 
  
• Stickers and dry-transfer decals are provided, along with a custom display base to assist with dynamic poses. Weight:1776g
  

• Characteristic GN Drive is accurately recreated! 
  
• Whole body specially designed to accommodate the GN-X’s unorthodox frame while keeping the MG range of motion and stability! 
  
• Cockpit hatch opens, and cockpit interior is detailed, and figures for both Peries and Sergei are included! 
  
• Following in the wake of the extremely successful Gundam Exia, the updated frame features the characteristic hex binder, and is built to allow maximum mobility! 
  
• Accessories: GN Beam Rifle, GN Beam Rifle Long Equipment, GN Beam Saber, GN Shield