HG version of the Altron, the resurrected version of Shenlong. New coloring, and now both arms extend with the claw weapon. Back-mounted beam cannon, too. Everything moves. Snap-fit assembly. Colored plastic.History of Altron GundamWhen the XXXG-01S Shenlong Gundam was captured and destroyed by OZ's forces in AC 195, the extremely durable gundanium-made remains of that mobile suit were taken to OZ's lunar base and mobile suit factory for storage. The five scientists who had built the Gundams plaguing OZ were also at the lunar base, captured and forced to develop new mobile suit technology to secure OZ's rule over Earth and the space colonies. Despite their apparent "cooperation," however, the scientists also began rebuilding both the Shenlong and the XXXG-01D Gundam Deathscythe in secret, preparing for the day when captured Gundam pilots Chang Wufei and Duo Maxwell could return to the battlefield. That opportunity came when the Romefeller Foundation - the political force behind OZ - became split over a number of issues, and the "Treize Faction" of OZ attacked the lunar base, which at the time was still under the control of Romefeller loyalists. During the chaos Lady Une released both Duo and Wufei with their partially upgraded XXXG-01D2 Gundam Deathscythe Hell and XXXG-01S2 Altron Gundam. The improvements given to the Altron were dramatic. The old beam glaive was replaced with a double-ended twin beam trident, and both arms were outfitted with Shenlong's highly effective "dragon fang" extending arms and claws (hence the Altron name, taken from the Chinese "ertou long" or "two-headed dragon"). Along with increased mobility from it's "wing binders" on its back which enhances it's mobility in space, the Altron also mounted a pair of beam cannons on a "stinger tail," giving it effective ranged firepower for space combat (both the wings and tail stinger were removed in the OVA version) The new Altron was henceforth a menace to the White Fang army during the "Eve Wars". After AC 195, Wufei, wanting to see what the true meaning of justice is, took the Altron with him to the newly formed Marimeia Army instead of sending it into the Sun with the other Gundams. Wufei fought against Heero Yuy twice, once when the latter was piloting an outdated OZ-06MS Leo and the second time when Heero piloted a revived XXXG-00W0 Wing Gundam Zero. Wufei, seeing that true peace could not be achieved through Operation Meteor, rebelled against the Marimeia Army during the battle in Brussels. After the rebellion, the Altron was later self-detonated by Wufei Simple instruction included in a box. Weight: 1000g History Source: http://gundam.wikia.com

HG-grade kit of the new version of the Gundam Heavy Arms as it appears in the Gundam Wing: Endless Waltz OVA series. Includes two different versions of the face (one half-covered by a clown mask -- this will make sense to you if you've seen the show). Features two big double-barrel gattling-style guns that can be gripped in the hands or mounted on the backpack. A dozen places on this model open to reveal missiles ready to fire. Other details are typical of Bandai HG kits: Molded in color, snap-assembly, poly-caps and foil stickers for detail colors. Unpainted pilot figure, too. Simple instruction included in a box. Weight: 1000g

Wing series. Somewhat Chinese-style robot from Gundam Wing. Right arm unfolds to double-length.History of Shenlong GundamThe Gundam called Shenlong was design and constructed by Master O somewhere in the L5 colony cluster. As the Shenlong Gundam was nearing completion, Mei Lan Long (Wufei's fiance) had taken the name of "Nataku", stole a mobile suit, apparently the Tallgeese, when the colony was attacked. Nataku piloted the Tallgeese out into space with a beam cannon. The ensuing battle took its toll on Nataku and she later died in Wufei's arms. Her death caused Wufei to take up the job of piloting Shenlong against the United Earth Sphere Alliance and OZ. Throughout the series, Wufei affectionately called the Shenlong Gundam "Nataku" after his deceased wife. The Gundam's primary armament consisted of head mounted vulcans, a Japanese style "beam glaive", and a Chinese inspired extendable "Dragon Fang" integrated with the right arm. The fang itself is armed with "claws" for grappling an opponent and two flamethrowers on the sides of the dragon head. History source: http://gundam.wikia.com Simple instruction included in a box. Weight: 1000g

This model kit includes parts to build either Tall geese I, II, or III (some painting may be required due to color differences between forms). Mega Beam Cannon can open up to to reveal firing mode, while heat whip is articulated with individual segments. Two beam sabers are also included along with figure of Zechs.

The grim reaper Gundam from Gundam Wing in its characteristic navy blue and yellow color scheme. Includes two different scythe effect blades as well as smaller naginata like blade. Buster shield claws open and close and include energy blade. Extra effect parts included to simulate thrusters firing under shoulders, while scythe is coated with a metalic silver.

Force Impulse w/Sword Silhouette Extra-Finish Simple instruction included in a box. Weight : 593g

• The main machine, 00 QAN[T], decided for release before the release of the movie! 
  
• The Bit Gimmick completely reproduced: The tip of Bit Blade has been formed with clear green. With the bit able to split, the battle scene from the promotion video can be reproduced! 
  
• Includes the 00 QAN[T] custom GN Sword. The mode change has also been recreated. 
  
• Clear parts have been used for the eyes, head, ears, and lens parts. 
  
• The bits can be detached. The binder part is mobile. 
  
• The swing action mechanism has continually been used, for obtaining a wide range of poseable area. 
  
• The Bits blade tip has been made with AFX material, with safety in mind. - Accessories: Bit, GN Sword Item Size/Weight : 302g
  

- 1 / 144 the size amazing transformation! Gandam Harute! - Reproduce the form of the transformation gimmick detachable rifle. - MS-time form, reproducing moving back binder. - Detachable backpack. Each movement in the base. - Accessories: Rifles × 2, Backpack. Item Size/Weight : 31 x 19.1 x 7.8 cm / 387g

Gundam HGUC RGM-98S Stark Jegan Simple instruction included inside a package. Item Size/Weight : 362g

• Serving as both an infiltration and APC unit in the OVA "Gundam Unicorn", this versatile mobile suit can transform between MS and Tank mode and features realistic treads. Armaments can switch between mega machine cannon or long range guns.

• Gundam D-50C Loto Twin Set Simple instruction included in a box. Weight: 339g
  

• Color molded body is reproduced in Real Type Color! Seal comes with special markings!
  

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 

Taishiji Dom (SD) Simple instruction included in a box.

- Marvelous giant signature line with Kanu [Zhou Cang Dobenurufu] animated version. - Ax shoulder armor that comes with an attached transformed into a wide range of features. - Equipped with swords and axes in the back can also be merged to have, a spokesman for a huge transformation.

• Unicorn Gundam Destroy mode and Unicorn mode are both released at the same time! Unicorn Gundam Destroy mode is No.100 of HGUC 
  
• By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. 
  
• Psycho frame is formed with transparent material, for an emphasis on transformation. 
  
• Use of new type polycap allows increased posing range. 
  
• Has mobility that's as good as MG, even though it is HGUC 1/144! 
  
• Includes: Shield (Open state) x1, Beam Saber (no beam) x2, Beam Magnum x1
  

• The official side-story MS, Gundam Avalanche Exia Dash! 
  
• Avalanche Exia Dash, active in the [Gundam 00V War Record]! 
  
• Comes with a stand base to enable display during flight. 
  
• Able to recreate Gundam Avalanche Exia by selection. 
  
• The newly set booster has been equipped with the folding gimmick. Able to be displayed without a stand base. 
  
• The additional leg armory has mobile mechanism, enabling flexible poses. 
  
• Accessories: GN Sword, GN Short Blade, GN Long Blade, GN Beam Saber (off) x4,GN Beam Saber (on), Stand Base.
  

Introducing GUNDAM DYNAMES featured in GUNDAM 00 from 1/100 scale series. Various wrists and foil stickers included. Covering parts in the waist for stable-ness. Belts made with TPE. Chest lens and shoulder belts made with special material. New joint system installed. Double joint system in the shoulders. Accessories include of: Includes beam rifle, beam sabers, hand guns, and armor covers.

The Cherudim Gundam joins the lineup of 1/100 scale precision models of Mobile Suits from Gundam 00. Shoulders incorporate a swing mechanism for enhanced mobility forward, back, up, and down, allowing for dramatic "aim and shoot" poses. Forehead-mounted sensor covers open for sniper mode, and the "follow screen" is molded in translucent plastic. GN shield bits can be removed and placed on a stand to re-enact scenes from the show. Includes GN sniper rifle II, and two GN beam pistol II guns.

AMS-129 Gera Zulu Angelo Sauper Custom Simple instruction included in a box.History:From the Zeon Zaku II, to the Federation's Hizack, to the Geara Doga of Neo Zeon, and finally to the Neo Zeon remnants' (otherwise "Sleeves") Geara Zulu. Based off of a general concept that has been tried and true, the Geara Zulu is the latest and most humanoid of the progression. Although its raw specifications are overall better than its predecessor, the Geara Doga, the Geara Zulu has a notably smaller load out. This may be because the Sleeves may not have a complete and legitimate army. Although an efficient mobile suit, it is obviously outperformed by the ReZEL mobile suits due to both their mobility and firepower. Source: http://gundam.wikia.com

First introduced in the "Mobile Suit Gundam Seed Frame Astrays" manga that ran in the Dengeki Hobby magazine, Trojan Noiret's custom Gundam Astray Green Frame now receives the coveted 1/100-scale plastic kit treatment from Bandai! This much-anticipated snap-fit kit release comes sharply detailed and molded in its distinctive dark green and white colors. Its polycapped joints allow it to be set in various dynamic action poses. Weaponry includes its signature Twin Sword Rifle that can switch between sword type and rifle type, two Beam Sabers, and a shield. Also included in the set is an 8.5cm unpainted figure of Trojan molded in beige. A sheet of foil stickers and a sheet of Trojan Noiret custom marking stickers are provided.

Bandai 467300 HG Gundam Seed Destiny ZGMF-X23S SAVIOUR GUNDAM 1/100 Scale Kit

Item is a plastic model kit and assembly is required (this is a snap kit and glue is not required)

Our items are Bandai original items distributed in Japan and comes with Japanese instructions (illustrated diagram is included)

Accessories: beam rifle, a dedicated base. Simple instruction included in a box.

History:

The Raphael Gundam was first deployed by Tieria Erde during Celestial Being's first attempted contact with the ELS. During this mission, Setsuna F. Seiei used the 00 Raiser Condenser Type and attempted to make contact with the ELS, but his attempt failed and the ELS attacked, with two ELS hitting the 00 Raiser's left arm and beginning to assimilate. However, Tieria arrived in the Raphael to assist, forcibly ripping off the 00 Raiser's left arm and saving the rest of the machine from assimilation, allowing Celestial Being to escape. Raphael's second deployment was during Setsuna's second attempt to communicate, this time using a combination of the Raiser System and Trans-Am to produce a Trans-Am Burst-like effect and expand his quantum field of communications. However, the ELS reacted violently and delivered a crippling mind attack to Setsuna, rendering him comatose and leaving the 00 Raiser open to assimilation. In his desparation to save Setsuna, Tieria quickly revealed the true form of Raphael's backpack, GN-008RE Seravee Gundam II. Using his quantum brainwaves, Tieria used the Seravee to forcibly rip the 00 Raiser's cockpit from the rest of the machine. After handing the cockpit to Lockon Stratos in the GN-010 Gundam Zabanya, Tieria took it upon himself to hold off the ELS long enough for Lockon to escape with Setsuna. However, even with his quantum brainwaves, the Seravee, and Raphael's Trans-Am System activated, Tieria was eventually overwhelmed by the ELS and suffered a mind attack of his own, leaving both the Raphael and the Seravee open to attack. Tieria's physical body, the Raphael and the Seravee were assimilated along with the 00 Raiser, forcing Tieria to return to Veda.

From the new series - Gunpla Builders Beginning Gundam! The original color Koji Tsuru Aya rival Ver! RX-93-ν2 Hi-Gundam ν! Accessories: beam rifle, bazooka

• Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  
• You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  
• The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1
  

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

• Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
• Both frame and armor are completely rescupted with revised proportions! 
• It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
• Its wing and beam cannons flex for full burst mode, as well. 
• A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

Mastering grade with MG campaign of the 30th [ganpura] anniversary and clear exterior. The limited amount, and a clear exterior parts and one runner are an additions wholly and same prices. This is a kit of reasonable difficulty that will look fantastic when it is all put together It is a really high-quality kit and comes with a variety of parts that should come together nicely when assembled. If you have been looking for a Gundam centrepiece, this is definitely a good choice. Simple enough that you can assemble parts in between games at http://www.poker.dk/, and modelled on yet another Gundam from the ongoing series, it is definitely one that many Gundam kit enthusiasts can sink their teeth into with relish. It can enjoy a mechanical interior.