Price Clear







Gundam Model Kits

Showing 511 - 540 of 2615 products

img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
img
SAVERM26.60

[041] HG 1/144 Ahead Smultron

A custom Mobile Suit optimized for use by Quantum Brainwave-capable pilots such as Soma Peries and Louise Halevy, Ahead Smultron is a high mobility-type variant of the A-Laws' mass-production Ahead that sacrifices armor and firepower in favor of speed with its GN Thruster attached to its back. This snap-fit kit of the Mobile Suit comes molded in color and features polycapped joints for great flexibility and dynamic posing. It can be equipped with the included Beam Saber, GN Shield, and a GN Sub-machine Gun that can switch into a GN Beam Rifle. A sheet of foil stickers is provided.

RM45.30
img
SAVERM95.90

MG 1/100 RGZ-95 ReZEL Gundam

- Based on the design of the Zeta Gundam, this mass produced MS is the next step in the Federation's MS army ! 

- Transformation mechanism accurately recreates this MS's shift into Wave Rider form while preserving the Suit's unique proportions!
* Wave Rider form grants heightened mobility and speed!
- Plus one gimmick and armed mechanism included.
- Full weapons system! Mount the Beam Rifle saber bayonet, access the arm-mounted Beam Saber storage. Beam Saber magazines are detachable, and extra magazines can be stored in the shield. 
- Includes all the details that we've come to expect from a modern MG!
* Rear Windshield reproduced in transparent elements. 
* Cockpit hatch opens, and scale pilot figure included.

- Accessories: Beam Rifle, Beam Saber x 2, Shield
Item Size/Weight : 39.2 x 31 x 8.3 cm / 814g

RM192.00
img
SAVERM47.90

[116] HGUC 1/144 MSN-06S Sinanju

  • Bearing resemblance to the -  'Red Comet', the rival machine with great impact,
  •   Sinanju has arrived in HG!
  • The reproduction of mechanism settings for the HG series has been greatly pursued.
  • The characteristic thruster parts have been given mobility. The thrusters of the legs
  •   are given independent mobility.
  • The impressionable backpack can be opened and closed. This will add more variety to
  •   the posing expressions.
  • The complicated engravings had been reproduced too. The engravings have been
  •   reproduced by the use of foil sheets.
  • By the utilization of part structure that stops the parts joints to standing out too much,
  •   the level of completion has been improved.
  • Also includes a set of closed fist (left and right).
  • The great variety of weaponry allows you to recreate many of the scenes from the
  •   original animation!
  • The attachment/detachment gimmick of the grenade part on the Beam Rifle
  •   had been reproduced.
  • The Grenade, Beam A-xe (Storage Mode), and Beam A-xe (Expanded Mode) can be
  •   attached to the back of the shield.
  • Beam A-xe can be combined to become the Beam Naginata.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Beam A-xe (Expanded Mode) x2,
  •   Beam A-xe (Storage Mode) x2

RM108.00
img
SAVERM29.90

[10] HG 1/144 Tieren Space Type

Here's a great new High Grade kit offering: a sharply detailed Tieren Space Type variant Mobile Suit! Molded in color, the blue Mobile Suit is armed with a 200mm x 25 calibur Smooth-Bore gun (space type) that can be mounted on either of its forearms, a 30mm machine gun on the left of its chest, and special equipment attachments that include a carbon wire launcher with bendable carbon wire, carbon net launcher, and gel launcher. Fully articulated with polycap joints, this kit has other movable parts including its mono-eye and nine flexible verniers. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

RM60.00
img
SAVERM55.90

[085] HGUC 1/144 RGZ-91 Re-GZ

  • Re-GZ appeared from [Mobile Suit Gundam: Char's Counterattack.
  • Reproduce the mechanism of deformation to form by the Fighter Space (Back Weapon System) BWS.
  • The deformation mechanism is adopted as part replacement formula, pursue the ease of play of transformation gimmick.
  • Pursuing the proportion seems to form space fighter aircraft by reducing the thickness of the fuselage.
  • To adopt a gimmick stretch the legs. Precise details of the internal mechanism, such as vernier Apojimota
  • Reproduction.
  • Comes the action-based connection unit for the display of a single BWS
  • (Action Base 2 is not included).
  • Weapons - Accessories: beam rifle, shield, beam saber

RM112.00
img
SAVERM26.20

[056] HG 1/144 Leons's Arms Astray PMC Custom

After using his personal custom UT-1D Civilian Astray DSSD Custom to battle Serpent Tail, Earth Alliance, and the guerrillas in the Republic of East Asia. Leons Graves decides to upgrade his Civilian Astray DSSD Custom into the PMC-1L Arms Astray PMC Custom. It first appeared in chapter 9, Xist piloting his CGUE Assault, Lukas piloting his Strike E IWSP, and Socius piloting his Hyperion G Unit 1 heads towards the ZAFT base for a cease fire and call for a truce. On there way Leons in his Arms Astray PMC Custom confronts Lukas. Lukas fires at Leons, but Socius protects him because he was a Natural. Leons then battles Lukas and damages his Strike E IWSP. source: http://gundam.wikia.com

RM56.70
img
SAVERM117.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily ?Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM312.00
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
img
SAVERM120.90

MG 1/100 RX-0 Unicorn Gundam Ver.Ka (Titanium Finish)


- The newly developed pure white Unicorn Gundam in a special "titanium" plated edition 
- The Unicorn's characteristic sparkling white armor has been enhanced with a beautiful plated coating on all the kit's white elements.
- Matching the brilliance of the shining white armor, gold highlights have been recreated using metallic gold decals.

- Accessories: 
Beam Rifle x1
Shield x1
Extra Magazine x2
Hyper Bazooka x1
Beam Saber x4

RM320.00
img
SAVERM54.90

MG 1/100 RX-79(G) Gundam Ground Type

RX-79(G) Gundam Ground Type.  

- Gundam from The 08th MS Platoon series. 

  History of Gundam Ground Type RX-79(G): The RX-79[G] Gundam Ground Type was used most notably by the Kojima Battalion operating in Southeast Asia, which fielded 12 RX-79[G] units, with the other eight participating in various operations on Earth. However, because the RX-79[G] were constructed from spare RX-78 parts, repair of damaged units became a tricky matter due to the unavailability of replacement parts. The result was the creation of custom RX-79[G] units such as the RX-79(G)Ez8 Gundam Ez8 piloted by Kojima Battalion 08th MS Team commander Shiro Amada, or Karen Joshua's Gundam with a GM Ground Type head. Federation Research and Development used three RX-79[G] units in their EXAM development program (see entry on Blue Destiny below).  

RM125.00
img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
img
SAVERM23.90

[001] HG 1/144 GN-001 Gundam Exia

  • High grade GN-001 Gundam Exia
  • Comes with installation manuals
  • Scale: 1/144
  • snap and fit that does not require any glue.
  • Detail wikipedia of GN-001 Gundam Exia can be found here.

RM48.00
img
SAVERM47.90

MG 1/100 Core Booster Ver.Ka

- On its own, it comes with V Core Booster and Core Fighter, Display Base, plus weapons for V Gundam too! - By combining it with the V Gundam already released, you can create the V-Dash Gundam. - The display base included is for V Core Booster. Accessories: Beam Rifle, Beam Smart Gun, Beam Javelin, Overhung Cannon, Gatling Gun, Rocket Launcher left/right, Disposable Buzz x2, display stand

RM84.00
img
SAVERM54.50

NG 1/100 GNY-001F Gundam Astraea Type-F

GNY-001F Gundam Astrea Type-F History of GNY-001F Gundam Astrea Type-F: The story is that as HRL’s battleship has gotten closer to CB’s Colony Krung Thep, 874 is gathering intelligence using the Sadalsuud, Ruido comes out in the Astrea to intercept. The instruction that came from Veda was “Defeat”. Here, Ruido in the Gundam starts attacking the person. Later on, the second generation Gundam Meister arrived in a transport aircraft on a battlefield. Four HRL MS “Phantom”s against the Gundam Meister 874’s Gundam Astraea fight a one-sided battle that ends in 36 seconds. Ruido in Astraea shoots down the first Helion Platoon that was examining AEU’s Orbital Elevator. In addition, 874 who intercepts in Sadalsuud, who sees the shadow of an approaching aircraft, proposes that Ruido does a check.Ruido sorties in the Astraea in place of the injured Marlene. Ruido does not want Marlene to go out into the battlefield. If he was fighting very well, then there’s no need for her to go out into the battlefield. Ruido exterminates the Helion force through Astraea. Source: http://gundam.wikia.com

RM113.40
img
SAVERM33.90

[117] HGUC 1/144 Gouf Custom

- Gouf masterpiece series [Gouf] appeared in the HGUC series!

- The biggest feature is the extensive armament Gouf 1 / 144 scale is also included!

- Hitoroddo ... Hitoroddo reproduce the lead, after the tip deployment comes before deployment.
Three twin 35mm Gatling gun · 75mm Gatling gun

- Hitosaberu

- Shield reproduce complex split!
* The shield can be removable from the twin 3 35mm Gatling gun.

- Hitosaberu is removable to allow Gatoringushirudo.
· 75mm Gatling gun and shield sets reproduce the splitting of the street.

- Comes with plenty hand parts
In addition to the grip of a fist, fist expressive (left) and palm (right) is included.

- Pipe materials used soft power of the waist belt fed ammunition is both easy to assemble and reproduce complex shapes using a soft material.
After mono eye - can be assembled by moving parts division.

- Accessories: Hitoroddo, Hitosaberu, shielded, 75mm Gatling gun,
3 35mm twin Gatling gun, for the fist grip (left), fist (right), palm (right)

RM62.00
img
SAVERM25.90

[056] HGUC 1/144 RX-121-1 Hazel-Custom Gundam

Used the Advance of Zeta photonovels, the Hazel is equiped with a number of experimental test equipment. Includes beam rifle, shield booster, normal shield, beam saber and shoulder mounted grenade launchers.

RM52.00
img
SAVERM107.90

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM162.00
img
SAVERM28.90

[065] HG 1/144 Gundam Astraea

- Official Gaiden MS, commercialization decisions Gandamuasutorea! - Official Gaiden Asutorea 00P appeared to reproduce the HG series. - Asutorea] come with basic equipment. - The backpack is also possible to assemble the cone-shaped selection formula. - Accessories: Proto GN Sword, GN Launcher, GN beam rifle, GN beam saber x— 2, Shield

RM60.00
img
SAVERM35.90

[063] HG 1/144 1.5 Gundam

  • Here is the evolved MS of the official sub story MS, 1Gundam, taking off! - Scheduled for appearance in the official sub-story 00I. The evolution of 1Gundam, equipped with a new armory binder on the back, has been reproduced as the I's Gundam in HG. 
  • You can choose to build it as 1Gundam itself. 
  • The new weapon binder has been equipped with a gimmick to reproduce each weapon modes such as the Cannon mode.
  • Includes the new weapon common to 1Gundam and 1.5Gundam, the large GN Sword and GN Beam Saber. 
  • Large GN Rifle is included too, for a very rich weaponry content. 
  • Accessories: GN Shield, Large GN Beam Rifle, GN Beam Saber x2 (Blade x1), Back Binder

RM72.00
img
SAVERM60.90

1/100 Gundam Seravee (Designer colors edition)

- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required.

RM171.00
img
SAVERM27.90

[098] HGUC 1/144 Full Armor 7th Gundam

  • The FA-78-3 Full Armor 7th Gundam first appeared as a part of Kunio Okawara's Missing Mobile Suit Variations (M-MSV). The Gundam was later redesigned and updated and appears in the video game Mobile Suit Gundam: Battlefield Record U.C. 0081.
  • Product Weight : 297g

RM62.00
img
SAVERM77.10

MG 1/100 Wing Gundam Zero Custom (Pearl Ver.)

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

RM150.80
img
SAVERM9.90

[BB326] Sonshoko Gerbera

Inspired by Sun Shangxiang from the Chinese literary classic "Romance of the Three Kingdoms," Sonshoukou Gerbera is now a nicely detailed snap-fit plastic kit! She wields a naginata weapon, and the bow on her back can be detached for use as an actual bow weapon! Includes two types of paper cut-out aprons. Part of Bandai's "BB Senshi Sangokuden Senjin Kettou Hen" ("BB Warrior Romance Of The Three Kingdoms: Battle of the War Gods Chapter") line, this simple kit is molded in color and features polycap joints, detachable armor parts, and heel stamps with his name etched into both heels for you to stamp on anything you like when stamp dye (not included) is applied to the heels! Foil stickers are provided for detail so painting is not required, but would add a more realistic appearance to the final product. A full-color manga chapter drawn by PLEX Tatsuhiko Shimoda is also included (printed on the assembly instructions sheet). Although the assembly instructions are in Japanese, they are extremely well illustrated so anyone can follow them.

RM24.00
img
SAVERM32.60

HGUC 1/144 Ewac-Zack

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

RM63.30
img
SAVERM29.90
RM60.00
img
SAVERM33.30

[079] HGUC 1/144 RX-79(G) Gundam Ground Type

wikipedia:While Project V was underway, the Federation also began production of experimental units using spare parts originally intended for the RX-78 Gundam. Using these parts they built approximately twenty specialized ground combat-model christened the RX-79[G] Gundam Ground Type during the mid-part UC0079. Though in many ways similar to its RX-78-2 predecessor, the RX-79[G] was quite a bit different in other ways, particularly in its armament. The beam sabers were stored in the legs, as the backpack mounted an equipment rack to carry storage containers, parachute packs, or other field options. The head vulcan guns were removed, as the head now carried a periscope for underwater and trench warfare. Although sporting a smaller generator than the RX-78, the Ground Type Gundam still had the generator power to use a beam rifle, though it was often equipped with a standard 100mm machinegun or a heavy 180mm cannon. A single vulcan gun and a multiple-use "multi-launcher" mounted in the torso's left breast rounded out the new armament. In order to make use of space, two extra ammunition packs for the machinegun were placed on the sideskirt armor. As the RX-79[G] was built out of spare parts from Project V, replacements parts were very limited. Luckily the RGM-79[G] shared 80% of the same parts as the Gundam, making field repairs easier but sometimes resulted in a few customized mobile suits. Source:http://gundam.wikia.com

RM56.60
img
SAVERM89.90

MG 1/100 00 QAN[T]


  • The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
  • Combination gimmick for the sword bits allows for a more accurate reproduction!
  • Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
  • The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
  • The pose with the Buster Sword armed looks great! Also comes with the Action Base
  • (Black) to display with!
  • Uses the GN Shield bits firing form as new mechanism.
  • Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
  • been reproduced with laser processing and foil sticker.
  • The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
  • creates a sense of machinery has been produced specifically for the development of MG.
  • Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
  • (standing/sitting), Action Base 2

RM180.00
img
SAVERM26.60

[025] HG 1/144 GNX-704T Ahead Mass Production Type

accessories: GN Rifle x 1, GN Shield x 1, Beam Saber x 2

RM45.30
img
SAVERM29.90

[107] HGUC 1/144 Zaku II F2 (E.F.S.F. Ver.)

From Gundam 0083 'Stardust Memory' comes our newest HGUC, the Zaku II F2, as used by the E.F.S.F. Bandai's design once again involves the use of plenty of poly-caps allowing this Zaku II a great deal of articulation. Included with this Zaku are the 120MM Zaku Machinegun, 90 mm Machinegun, Heat Hawk, and the Missile pods which attach to the legs. Marking stickers are also provided.

RM60.00

Showing 511 - 540 of 2615 products