This "ground pounder" carries a backpack (could hold a car) which opens for weapons storage. Cockpit armor panels fold down. Includes an unpainted figure of Pilot Shiroh Amada. The instruction book is 19 pages and includes a "Documentary photographs" page, and painting guides. Weapons include Beam Rifle, 10mm Machine Gun, Hyper Bazooka (Ground Type), Beam Saber and Shield.
Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.
A custom Mobile Suit optimized for use by Quantum Brainwave-capable pilots such as Soma Peries and Louise Halevy, Ahead Smultron is a high mobility-type variant of the A-Laws' mass-production Ahead that sacrifices armor and firepower in favor of speed with its GN Thruster attached to its back. This snap-fit kit of the Mobile Suit comes molded in color and features polycapped joints for great flexibility and dynamic posing. It can be equipped with the included Beam Saber, GN Shield, and a GN Sub-machine Gun that can switch into a GN Beam Rifle. A sheet of foil stickers is provided.
Here's a great new High Grade kit offering: a sharply detailed Tieren Space Type variant Mobile Suit! Molded in color, the blue Mobile Suit is armed with a 200mm x 25 calibur Smooth-Bore gun (space type) that can be mounted on either of its forearms, a 30mm machine gun on the left of its chest, and special equipment attachments that include a carbon wire launcher with bendable carbon wire, carbon net launcher, and gel launcher. Fully articulated with polycap joints, this kit has other movable parts including its mono-eye and nine flexible verniers. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.
After using his personal custom UT-1D Civilian Astray DSSD Custom to battle Serpent Tail, Earth Alliance, and the guerrillas in the Republic of East Asia. Leons Graves decides to upgrade his Civilian Astray DSSD Custom into the PMC-1L Arms Astray PMC Custom. It first appeared in chapter 9, Xist piloting his CGUE Assault, Lukas piloting his Strike E IWSP, and Socius piloting his Hyperion G Unit 1 heads towards the ZAFT base for a cease fire and call for a truce. On there way Leons in his Arms Astray PMC Custom confronts Lukas. Lukas fires at Leons, but Socius protects him because he was a Natural. Leons then battles Lukas and damages his Strike E IWSP. source: http://gundam.wikia.com
The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.
What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!
RX-79(G) Gundam Ground Type.
- On its own, it comes with V Core Booster and Core Fighter, Display Base, plus weapons for V Gundam too! - By combining it with the V Gundam already released, you can create the V-Dash Gundam. - The display base included is for V Core Booster. Accessories: Beam Rifle, Beam Smart Gun, Beam Javelin, Overhung Cannon, Gatling Gun, Rocket Launcher left/right, Disposable Buzz x2, display stand
GNY-001F Gundam Astrea Type-F History of GNY-001F Gundam Astrea Type-F: The story is that as HRL’s battleship has gotten closer to CB’s Colony Krung Thep, 874 is gathering intelligence using the Sadalsuud, Ruido comes out in the Astrea to intercept. The instruction that came from Veda was “Defeatâ€. Here, Ruido in the Gundam starts attacking the person. Later on, the second generation Gundam Meister arrived in a transport aircraft on a battlefield. Four HRL MS “Phantomâ€s against the Gundam Meister 874’s Gundam Astraea fight a one-sided battle that ends in 36 seconds. Ruido in Astraea shoots down the first Helion Platoon that was examining AEU’s Orbital Elevator. In addition, 874 who intercepts in Sadalsuud, who sees the shadow of an approaching aircraft, proposes that Ruido does a check.Ruido sorties in the Astraea in place of the injured Marlene. Ruido does not want Marlene to go out into the battlefield. If he was fighting very well, then there’s no need for her to go out into the battlefield. Ruido exterminates the Helion force through Astraea. Source: http://gundam.wikia.com
- Gouf masterpiece series [Gouf] appeared in the HGUC series!
- The biggest feature is the extensive armament Gouf 1 / 144 scale is also included!
- Hitoroddo ... Hitoroddo reproduce the lead, after the tip deployment comes before deployment.
Three twin 35mm Gatling gun · 75mm Gatling gun
- Hitosaberu
- Shield reproduce complex split!
* The shield can be removable from the twin 3 35mm Gatling gun.
- Hitosaberu is removable to allow Gatoringushirudo.
· 75mm Gatling gun and shield sets reproduce the splitting of the street.
- Comes with plenty hand parts
In addition to the grip of a fist, fist expressive (left) and palm (right) is included.
- Pipe materials used soft power of the waist belt fed ammunition is both easy to assemble and reproduce complex shapes using a soft material.
After mono eye - can be assembled by moving parts division.
- Accessories: Hitoroddo, Hitosaberu, shielded, 75mm Gatling gun,
3 35mm twin Gatling gun, for the fist grip (left), fist (right), palm (right)
MS-14S Gelgoog Char Custom Ver.2.0
- Official Gaiden MS, commercialization decisions Gandamuasutorea! - Official Gaiden Asutorea 00P appeared to reproduce the HG series. - Asutorea] come with basic equipment. - The backpack is also possible to assemble the cone-shaped selection formula. - Accessories: Proto GN Sword, GN Launcher, GN beam rifle, GN beam saber x— 2, Shield
- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required.
Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.
Inspired by Sun Shangxiang from the Chinese literary classic "Romance of the Three Kingdoms," Sonshoukou Gerbera is now a nicely detailed snap-fit plastic kit! She wields a naginata weapon, and the bow on her back can be detached for use as an actual bow weapon! Includes two types of paper cut-out aprons. Part of Bandai's "BB Senshi Sangokuden Senjin Kettou Hen" ("BB Warrior Romance Of The Three Kingdoms: Battle of the War Gods Chapter") line, this simple kit is molded in color and features polycap joints, detachable armor parts, and heel stamps with his name etched into both heels for you to stamp on anything you like when stamp dye (not included) is applied to the heels! Foil stickers are provided for detail so painting is not required, but would add a more realistic appearance to the final product. A full-color manga chapter drawn by PLEX Tatsuhiko Shimoda is also included (printed on the assembly instructions sheet). Although the assembly instructions are in Japanese, they are extremely well illustrated so anyone can follow them.
wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com
wikipedia:While Project V was underway, the Federation also began production of experimental units using spare parts originally intended for the RX-78 Gundam. Using these parts they built approximately twenty specialized ground combat-model christened the RX-79[G] Gundam Ground Type during the mid-part UC0079. Though in many ways similar to its RX-78-2 predecessor, the RX-79[G] was quite a bit different in other ways, particularly in its armament. The beam sabers were stored in the legs, as the backpack mounted an equipment rack to carry storage containers, parachute packs, or other field options. The head vulcan guns were removed, as the head now carried a periscope for underwater and trench warfare. Although sporting a smaller generator than the RX-78, the Ground Type Gundam still had the generator power to use a beam rifle, though it was often equipped with a standard 100mm machinegun or a heavy 180mm cannon. A single vulcan gun and a multiple-use "multi-launcher" mounted in the torso's left breast rounded out the new armament. In order to make use of space, two extra ammunition packs for the machinegun were placed on the sideskirt armor. As the RX-79[G] was built out of spare parts from Project V, replacements parts were very limited. Luckily the RGM-79[G] shared 80% of the same parts as the Gundam, making field repairs easier but sometimes resulted in a few customized mobile suits. Source:http://gundam.wikia.com