GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

Sharing the same mold as the 2007 1/100-scale Gundam Exia, this kit of Setsuna's Mobile Suit comes molded in glossy colors for you to build the mech in Trans-Am mode. The sharply detailed kit can take on a wide range of poses upon completion, thanks to the use of polycaps in its joints. It comes fully equipped with its signature weaponry, including a GN sword that can switch to GN sword rifle mode, and foldable shoulder antennas. Not a drop of glue or paint is required! A sheet of hologram foil stickers is included. Combat Characteristics Designated as a 3rd-generation Gundam, the Gundam Exia is built with close combat as its major strength. The unit is the successor to its second generation predecessor, GNY-001 Gundam Astraea; much of Exia's design was heavily influenced from Astraea. While there are strong similarities to Astraea, Exia has its own differences from weapons to systems. Exia was created as a high-mobility unit to greatly supplement its close combat role. In order to maximize its potential in speed and movement, its legs was given the best human articulation as possible to improve its Active Mass Balance Auto Control (AMBAC).[1] The trade-off is the reduction of armor parts in several joints that reveal its internal frame; its MS frame is more vulnerable against enemy attacks.[1] However, the pilot can defend against enemy attacks with Exia's GN Shield. It's high mobility design has served Exia well as it has the lowest being-hit rate amongst the four 3rd-generation Gundams.[1] The Seven Swords System refers to the wide array of GN Blades that was designed and used on the Exia.[2] While, redundancy and flexibility was built into the weapons selection for multiple scenarios and specializations in close combat situations, this was intentional as Exia's armaments were solid armaments instead of beams. The development of solid state swords was to anticipate against enemy units that could potentially rival the Gundams. The sheath of GN Particles surrounding the blade interact with and eventually negate the tightly clustered particles of a GN Field for direct penetration. Exia's head contains the blackbox device used for quantum communication interface with Veda as well as some particle control ability.[1] Its GN Condensers also can show visually the amount of particles it holds as well as the particle compression rate it is currently using.[1] This ability is also used for secret communication with friendly forces.[1] When extreme firepower and defense is needed, Exia can receive combat support from GNR-001E GN Arms Type-E and the Assault Container. The GN Arms Type E itself is a customized transformable fighter, with mid-range beam weaponry and melee weapons themed after Exia's weapons silhouette. When greater power is needed, Exia and GN Arms can combine to become a mobile armor. Exia's GN Drive docks right into the MA to power the weapons platform. If a situation arises where greater mobility is needed, Exia can be equipped with its own specialized armor, the Avalanche Pack, which would be later upgraded into the Avalanche ` Pack. The Assault Container works on conjunction with the GN Arms and Exia as a miniature armed MS carrier. It was designed to dock both Exia and GN Arms for atmospheric entry and exit missions. It's heavily armored and has enough fire power to match an entire ESF battlefleet. In addition, the Exia's extension cone chassis possess an ability that can temporarily increase the output of the equipped GN Drive and the ability of the suit temporarily in "burst"-like mode.[1] However, this ability was rarely used as it is considered unstable however it was seen to be used in its upgraded form, the Exia Repair II.[1][3] Exia's overall capabilities can be enhanced through the power of the Trans-Am System. With the Seven Sword armament combined with the skills of Meister, Setsuna F. Seiei, the Gundam Exia was a machine to be feared in close combat. Source:wikipedia

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestal

- 00 New Movie Mobile Suit Gundam MS released simultaneously aircraft commander General Machine Brave! - Accessories: beam rifle, beam saber (ON), pedestalHistories:The GNX-Y903VS Brave (Commander Test Type) is featured in Mobile Suit Gundam 00 The Movie: A Wakening of the Trailblazer, where it is developed and deployed by the Earth Sphere Federation Army. The GNX-903VS Brave (Commander Test Type) is a customized version of the GNX-903VS Brave (Standard Test Type), and was assigned to Captain Graham Aker, who leads the Sol Brave Squadron, an elite mobile suit squadron composed exclusively of Brave units. The Braves were first seen when Graham deploys the Sol Brave Squadron to assist Celestial Being during their second attempt to communicate with the Extraterrestial Living-metal Shape-shifter. Graham and his squadron covered the Celestial Being retreat, and while both parties were able to retreat, the effort was not without casualties - some of Graham's Braves were assimilated, while Celestial Being lost the GN-0000RE+GNR-010 00 Raiser (Condenser Type), the GN-008RE Seravee Gundam II, the CB-002 Raphael Gundam, and the physical body of Tieria Erde. Later, Graham and his remaining men sortied to hold back the ELS invasion alongside the rest of the ESF Army and Celestial Being. During the battle, Graham defended Gundam Meister Setsuna F. Seiei and the GNT-0000 00 Qan[T] from the ELS attack. While he fought valiantly, Graham's Brave was eventually struck by several ELS, and was already being partially assimilated. With nothing left to lose, Graham decided to believe in Setsuna's vision for a brighter future, and sacrificed his life for the sake of that vision, activating Trans-Am and smashing into the ELS mothership to clear a path for the 00 Qan[T] to enter the massive superstructure. It is currently unknown how many Braves remained after the final battle, or if they were ever put into full mass-production.Source:http://gundam.wikia.com

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

Gundam Astray Mirage Frame History of Gundam Astray Mirage Frame: In CE 71, the Orb Union's Morgenroete corporation built five Gundam Astray prototype mobile suits at Heliopolis, the MBF-P01 Astray Gold Frame, MBF-P02 Astray Red Frame, MBF-P03 Astray Blue Frame, MBF-P04 Astray Green Frame and the MBF-P05 Astray Mirage Frame, which were used to base the five G Project Gundams that they assisted the Earth Alliance's Atlantic Federation in creating. They successfully copied the EA's beam rifle and saber technology, but Morgenroete did not have access to the Phase Shift armor design, and compensated this by making the Gundam Astray units lighter and more agile than their EA counterparts. On January 25, CE 71, ZAFT's attack on Heliopolis to steal the Alliance Gundams also unknowingly interrupted the Astray Project. In order hide their progress, Orb's military decided to destroy the Astray lab. However all Astray prototypes survived and fell into the hands of different factions. The Mirage Frame, which only existed in form of reserve parts, fell into the hands of the mysterious organization Librarian, who modifed it to the existing model. With the rebirth of Rondo Ghina Sahaku by Librarian, he is given this mobile suit for his revenge towards Gai Murakumo. However, the Mirage Frame is heavily damaged in battle with Gai's MBF-P03R Gundam Astray Blue Frame 2nd Revise and the Mirage Frame is significantly upgraded to the MBF-P05LM2 Gundam Astray Mirage Frame 2nd Issue. Source:http://gundam.wikia.com

Gundam Astray Mirage Frame Second Issue Histories of Mirage Frame: In CE 71, the Orb Union's Morgenroete corporation built five Gundam Astray prototype mobile suits at Heliopolis, the MBF-P01 Astray Gold Frame, MBF-P02 Astray Red Frame, MBF-P03 Astray Blue Frame, MBF-P04 Astray Green Frame and the MBF-P05 Astray Mirage Frame, which were used to base the five G Project Gundams that they assisted the Earth Alliance's Atlantic Federation in creating. They successfully copied the EA's beam rifle and saber technology, but Morgenroete did not have access to the Phase Shift armor design, and compensated this by making the Gundam Astray units lighter and more agile than their EA counterparts. On January 25, CE 71, ZAFT's attack on Heliopolis to steal the Alliance Gundams also unknowingly interrupted the Astray Project. In order hide their progress, Orb's military decided to destroy the Astray lab. However all Astray prototypes survived and fell into the hands of different factions. The Mirage Frame, which only existed in form of reserve parts, fell into the hands of the mysterious organization Librarian, who modifed it to the existing model. With the rebirth of Rondo Ghina Sahaku by Librarian, he is given this mobile suit for his revenge towards Gai Murakumo. But when it was greatly damaged by Gai's MBF-P03R Gundam Astray Blue Frame 2nd Revise, Librarian upgraded the Astray Mirage Frame into the Astray Mirage Frame 2nd Issue while modifying Ghina for him to pilot it. It was dispatched into battle against Serpent Tail and this time destroyed Gai's unit for his revenge. He later betrays the Librarian Works and now being hunted by the Junk Guild, Serpent Tail and the Librarian Works due to his actions. Source:http://gundam.wikia.com/

GN-003 Gundam Kyrios MG 1/100. History of GN-003 Gundam Kyrios: Most of GN-003 Gundam Kyrios's history and exploits can be found on Allelujah Haptism's page. UN Forces Capture & Experimentation After the battle against the UN Army ended, Allelujah ejected the unit's GN Drive before it came into the hands of the UN Army. The GN Drive was recovered by Fon Spaak for Fereshte, and after Celestial Being negotiated for its return along with 0 Gundam's GN Drive. Kyrios was then used by the Human Reform League as an experiment with a Tieren arm and a GN-X hand using a GN Drive Tau. This specific experiment failed due to the GN Particles from the Drive having difficulty transferring power to the end of the experimented arm. Data gathered in these experiments was eventually used in development of the GNX-704T Ahead.What has happened to the Kyios after the expreiment remains unknown Sources:http://gundam.wikia.com

• Lens is reproduced with clear parts! 
  
• GN shield can be attached to the back! 
  
• Accessories: GN Sword V, GN Sword GN Sword V for the union point of a sword-bit, BB322 Raiser particles for storage tank, grain storage tank, seat.
  

Here's an excellent snap-fit assembly kit of Lockon Stratos' personal Mobile Suit, Gundam Dynames! Molded in color, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode.

Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor.

The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

GN-009GNHW/B Seravee Gundam GNHW/B

Arnaments in movies series
i. GN Bazookas
The new GN Bazookas are an overall improvement over Virtue's bazooka. While it can fire the weapon traditionally as a single piece weapon, GN Bazooka IIs has multi-function capabilities and enhancements over its predecessor. The 2 separate bazookas can be combined into a single form that is reminiscent of Virtue's. This design was intentional, due to past experiences with high speed combat enemy units. Virtue's Bazooka might have been powerful, but its beam fire was so slow that it was easy for enemy units to avoid getting shot. The GN Bazooka II can fire faster and can be used in conjunction with GN Cannons for extended range and firepower. When greater firepower is needed, the split bazooka can be attached onto the shoulder GN Cannons to enhance it's firing solution in range and power. As a single piece weapon, the Double Bazooka, it can fire a particle beam sphere.

ii. GN Cannons
Four GN Cannons are attached in between the rear shoulders and knees of Seravee. They are improved versions of Virtue's cannons as they are smaller, lighter, and have greater firing succession rates. The top cannons can work in conjunction with GN Bazooka II for extended range and firepower. In addition, the GN Cannons also works in conjunction with Seravee's GN Field. When all four cannons are deployed, a GN Field is generated at the center. When the cannons fire, the central GN particles and the cannon become a single blast that's comparable to Virtue's GN Bazooka Burst Mode. A hidden ability of the GN Cannons are that they double as transformable MS arms, with their own GN Beam Sabers for melee combat. This feature was added in consideration for Seravee's lack of speed, poor maneuverability, and other deficiencies as a countermeasure(s).

iii. GN Beam Sabers
Seravee has a total of 6 beam sabers, 2 in its MS forearms and 4 hidden within its cannons/MS arms. The additional beam sabers are hidden and only used in dire situations (such as facing close-combat mobile suits).

- Gundam X Gundam X Divider extended aircraft appeared in HG series. 

The next kit in the Gunpla Builders line is Rina Noyama's adorable Beargguy. This little fella comes molded in color and snap fits together so you don't need glue or paint. Extra parts to make an extendable arm are included as well as marking stickers for the eyes. Just updated with review :)

1/144 scale HG kit of the Aegis Gundam from the new hit Gundam series 'Gundam Seed'. And yes, it's pink! Actually, it's a sort of a coral color, for the most part. Polycaps are included to allow it to transform to mobile armor mode with four claw arms which can close tightly for flight. A spiffy little kit for the price!

High Grade injection plastic model of the Destiny Gundam is molded all in colour and snaps together so you don't need to paint or glue it! Clear parts for its beam shield and those big pink wings are included. Foil stickers are included for added detail; and polycaps work the joints. Parts for a custom display stand are included.

Oowashi Akatsuki Gundam (HG) 1/144

• Very sharp high-grade Strike Freedom Gundam comes molded in all the right colours and features snap-fit assembly. Clear parts for the Beam Shield and Super Dragoon are included. Foil stickers add detail to the finished model.
  

HG Strike Rouge IWSP, scaled 1/144

What could possibly be better than Infinite Justice? Isn't that the way the giant robot world works anyway? Here's the Infinite Justice Gundam to prove just that, powered up with a tonne of weaponry, full action with polycaps at the joints, the "Phantom-01", and a display stand to show it all off. All parts are molded in colour and snap together, so you don't need to paint or glue it; stickers are included for added detail.

History of Infinite Justice
The ZGMF-X19A Infinite Justice Gundam is an advanced mobile suit secretly built by ZAFT's rogue Clyne Faction, based on the earlier ZGMF-X09A Justice. It utilizes a new engine design and advanced weaponry that gives it several times the combat ability of the original Justice.

The Second Battle of Orb
The ∞ Justice makes its debut in Cosmic Era 74, arriving on Earth together with the ZGMF-X20A Strike Freedom during the ZAFT invasion of Orb. It is delivered to Athrun Zala personally by Lacus Clyne, who pilots the ∞ Justice through atmospheric re-entry and lands in the Archangel's mobile suit hangar to give it to Athrun. After talking with Lacus, Athrun takes off in the infinite Justice to back-up Kira in the Strike Freedom, who was battling both the ZGMF-X42S Destiny and the ZGMF-X666S Legend and manages to chop off Destiny's wrist despite Athrun being injured before the fight.

The Final Battle of Second Bloody Valentine War
The Justice also plays a highly prominent role in the end of the Second Bloody Valentine War. First, Athrun disables both Shinn Asuka's Destiny and Lunamaria Hawke's ZGMF-X56S Impulse. Then, Athrun cripples the Minerva by utilizing the multiple beam cutters on the Justice's Fatum-01 backpack to destroy the Minerva's spaceflight engines. Lastly, Athrun used the ∞ Justice's backpack, along with help from Mu La Flaga's ORB-01 Akatsuki's DRAGOONs, to destroy Requiem. When the battle is brought to an end, the ∞ Justice rescues both Shinn and Lunamaria.

Source:wikipedia

- Bigining gandam evolve! The final form of additional weapons packed a big success! - To add new parts and more heroic style! - Evolution of the beam rifle? - Plenty of power by armed! - Effects jet beam (clear plastic) can be produced just like in the movie! - Accessories: Break beam rifle, shield, beam shield, beam saber, Of three beam saber in one hand, the effect × 8 beam

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

- The second volume of HGFC(Future Century) is Nobell Gundam! 

Bandai will also issue a huge, 1/144 scale Meteor Unit from Gundam Seed. Similar in concept to the Dendrobrium, this monster measures 57cm (22-1/2 inches!) long when completed, and includes a new-color version of the Freedom Gundam (photos show the Justice Gundam, but only the Freedom Gundam is included with the kit!). 

Bandai's "BB Senshi" line of "SD" Gundam kits (SD stands for "Super Deformed") are cute little comic interpretations of machines from the original Gundam series. Kits are molded in color and feature easy snap-assembly, suitable for young kids. Many also have little spring-loaded missile shooters that launch plastic projectiles (hands, bombs, etc.). Stickers included, too. Finished kits stand about 5-6cm high.

Left and right arm can be mounted on large-caliber rifle. 

HG GNW-001 Gundam Throne Eins scale 1/144

- Part B competition lineup machine! - Accessories: Special weapon