• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

MG Freedom Gundam (Extra-Finish Edition)

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

• MG RGM-79(G) GM Ground Type
  

• MG FA-010S Full Armor ZZ Gundam
  

• MG RX-78-2 Gundam (Ver.1.5)
  
• This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  
• Upgrade product of the master's first grade! !
  

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam
  

- Accessory: Large-scale GN beam saber ×2 that GN buster, large-scale rifle, GN [finfangu] × 4 (Canon Inc. ordnance at the Canon Inc. mode), and is shielded.

- Accessory: 2, saber × [bi-muchakuramu], flat part of the hand (Only the right hand :), and the BA-1 type.

- Accessory: GN bazooka II and GN beam saber × 2 (one brevi 1 in length)

- Includes: Beam Saber x2 (long/short), Beam Chakram x1, Open hands with expression (left/right) x1, Closed Fist (right), BA-1 type base x1

- Able to attach the rifle in two ways. - Comes with: GN Buster Rifle, Large GN Fin Fang x4 (Cannon during Cannon mode), GN Shield, Large GN Beam Saber x2

A unit used by the Innovate Anew, it features GN saber fangs and sword that can be displayed suspended behind in mid air. A display is included.

- Accessory: 2 and 2 and 2 and special flat part of the hand × grasp person × stand beam saber

Refined Masurao used by Mr. Bushido in the second season of Gundam 00 features physical blades that can be combined, a beam chakram effect part that can be housed above the head, and Try Punisher weapon housed inside the chest and shoulders. Display stand included.

- A rifle that shields of the exclusive use and is special is attached. 

• Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 
  

- The fourth SD Gundam from Bandai's new Brave Battle Warriors Series is the Shin Koshin Gyan. Assembly is quick and easy thanks to the detailed instruction sheet. The latest version of the Gyan also comes with his shield, but this one has thee hidden blades making a dangerous pin-wheel type of weapon. Marking stickers are also supplied. The instruction sheet even includes a little comic about our cute little hero. - General and the velocity commercialization of "Information Brave Battle Worriors on three SD Gundam of super-TEL edition of [kage] countries" appearance.

Part of Bandai's BBSenshi Sangokuden comes #356, the Kakuka Virsago. Simple assembly and the use of polycaps means you can construct this cute little guy quickly and pose him in a variety of stances. He comes with Hyouran ken and can transform between Bushou and Masou modes. The instruction booklet even contains a mini comic strip featuring this character. - Equip parts of BB soldier No.352 game god combination. - Accessory: sword × fan.

- A huge mantle by which the inside becomes a wing is attached. Arms with the blade of two [takaratsurugi] and the lacquer black are attached. - Two [takaratsurugi] and the armor parts of the arm unite and are transformed into large-scale arms. [**] [honootenma]" ..killer shot ".. is reproduced.

- Inherit Gundam RX-78-2 Gundam justice to two great co-star! - NT-1 is enhanced armor [Armor Chobham] accepted wear! - Chobham armor Chobham original tank is BB! - Head Gear original BB. - GP01Fb Gundam is one of the episodes up to the movie [Retrofit] reproduced in the product! - The retrofit parts recombination, GP01 and can reproduce GP01Fb. - The newly added Makingushiru, SD yet, MG reminiscent of the dignity! - Accessories: Gundam RX-78NT-1 ... Armor Chobham, Gatling gun × 2, beam saber, shield - Accessories: Gundam GP01Fb ... GP01 retrofit parts, beam rifle, beam saber × 2, Shield

- Two basic large Gundam the 21st century of Kira Yamato & moment and F and [seiei]. Competing of dream. - The activity image color is adopted in the play, and equipment is a full set. Real SD is pursued. - Feature GN drive of [ekushia] is detachable. Clear parts are used for the head and the chest. - Marking seal that is reminiscent of MG. - The freedom Gundam : to each attack mode. To the high mat mode (high mobile empty war mode). The [kusui;faasure-ru] ordnance and the [barae-napurazuma] settling beam ordnance are developed. Accessories: [Rupusubi-muraifuru], shield, GN sword, GN shield, GN long blur id, GN short blur id, and GN beam saber and GN beam dagger

• It appears from the BB soldier of the 30th Gundam anniversary in a Gundam new specification. 
  
• The prime field uses the one of BB soldier No.236 perfect Gundam. 
  
• It is a popular style in the RX-78-2 Gundam of the BB soldier series. 
  
• Movable range of head to decide line of vision easily. Even with arms with the collaboration parts of the chest and the shoulder, the pose is decided. Flight pose road-hugging ..&.. high. range of movement & movable tiptoe it where hip joint is wide - It is the marking Tetoron seal attached though it is small that produces the outlook on the field of real of ..becoming it.. [sei]. 
  
• Arms are a new metal molds and newly built types. Special arms to consider the outlook on the world of a real BB soldier are reproduced by a new metal mold. - Accessories: 1 and 1 and shield × beam saber × 1 beam rifle.