BB GF13-011NC Dragon Gundam

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

RGM-79 (G) GM

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

Along with the Hyaku-Shiki (Type 100), the Rick Dias is one of the most popular mecha from Zeta Gundam as it was designed by Mamoru Nagano of L-Gaim and Five Star Stories fame. This new kit does it justice, featuring overall slimmer, sharper proportions than the chunky High Complete Model or 1/100 kit of many years ago. As usual for kits in the High Grade series, it's molded in color, features snap assembly, and has poly-caps for all the moving joints.Reviews by Gundam.tk: Personal review: Limited mobility on the feet as the armor pieces on the leg constrained the movement of the lower body part, you have a clearly loose part on the head of the rick Dias (once is completed), and you got to be careful on 'some' of the part.

• Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  
• Features huge rear skirt and knee armor, as well as upgraded thrusters.
  
• Can convert from Quattro Custom to standard Rick Dias! 
  

This Special Edition of the 00 Raiser comes with all clear plastic parts giving it a look unique unto itself. Just like the original release this special edition comes with a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and GN Shields. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! The included clear green Celestial Being Action Base can be used to set the Mobile Suit in dynamic mid-air poses. A sheet of foil stickers is provided. Two button batteries are required, not included.

• Gundam Exia in its restored form features new GN Sword weapon and different leg and shoulder parts. Also contains parts to build the original Exia.
  
• Accessories: new GN Sword x 1, GN beam saber x 4, GN shield x 1, GN Short Blade x 1, GN Long Blade x 1, GN beam saber x 1

• From the "Gundam Seed Frame Astrays" manga series comes this nicely detailed snap-fit model kit of Trojan Noiret's Gundam Astray Green Frame, armed with its deadly twin sword rifle! 
  
• Trojan's custom Mobile Suit is molded in color and will be fully articulated upon completion, thanks to its polycapped joints. 
  
• In addition to its twin sword rifle, it comes equipped with the standard beam saber, beam rifle, and shield. 
  
• Stickers are included to add detail to your completed kit.
  

This Mobile Suits Variation model is molded all in color and features snap-fit assembly. Highly posable with lots of polycaps at the joints. Stickers are included for details. The light shield is represented with a nicely molded clear green plastic part.

The best thing about this disturbingly orange and green mecha is the fact that when it"e;s completed, it can transform from Mobile Suit mode to Mobile Armour mode. A custom display stand for showing it off is included as well. All parts snap together and are molded in colour; polycaps ensure smooth-moving joints. Foil stickers for details are included.

The amphibious green mobile suit from "Mobile Suit Gundam" has arrived in Bandai's HGUC series! This snap-fit-assembly kit comes molded in color and features articulated joints, plus impressive inner mechanical detailing for its head and chest areas. Its multi-directional mono eye is movable through its rails underneath the armor.

Lovely HG Gundam Astray Red Frame features parts molded in color, and snap-fit assembly, making it a breeze to get this poseable mech into action! The sword blade is made of 'meki' parts -- nicely chromed for that metallic look! Stickers are included for detail. 

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 

Here's a sharp HGUC snap-fit plastic kit of MS-06FZ Zaku II FZ (Kai) as it appeared in the "Mobile Suit Gundam 0080: War in the Pocket" OVA series. Molded in color, this kit features polycapped joints and movable skirt armor that allow it to be set in dynamic poses. An optional Zaku B-type head is also included, along with an MMP-80 90mm machine gun, three hand grenades (molded as one part), and a heat hawk. A sheet of foil stickers and a Zeon marking sticker are provided to add detail to the completed model.

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

• This particular version of the Rick-Dom never appears in any Gundam TV, only in the original novel as written by Gundam creator Tomino. Collectors love this stuff! Different color from the standard release, new weapons (Zaku Machinegun), and also includes an unpainted 1/20 Char figure, in military costume.
  

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 

Who can resist a cute blond guy in a big mecha? Even a cute blond guy with a dumb name? But we're not here about the cute blond guy, we're here about his butt-kicking Blaze Zaku Phantom, jam-packed with missiles, a beam tomahawk, a Zaku machinegun, two shields, plenty of poseable joints thanks to polycaps -- the whole kit will be a joy to put together, thanks to Bandai's great engineering, as usual. Everything's molded in colour so you don't need to paint it; and it all snaps together so you don't need to glue it. A die-cut clear plastic data card for Rey Za Burrel (about whom nothing, it seems, but his height, weight, and blood type are known) is included. Get one while you can, 'cos crazy blond guys' mechas never seem to stay around for long!

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

Recreate the heated battle scenes seen in the "Mobile Suit Gundam MS IGLOO 2: Gravity Front" OVA or build your own custom One Year War battlefield diorama with this impressive HGUC set offering! Included are snap-fit parts that come molded in color and allow you to build a HGUC mass production type MS-06 Zaku, which can be equipped with weaponry consisting of a Zaku Machine Gun, Heat Hawk, a pair of three-tube missile pods, Zaku Bazooka with two firing effect parts, two Crackers, and two Sturm Fausts. Three pairs of optional hands are provided. Also packed in this set are two Type-615+ E.F.G.F. M61A5 main battle tanks with two explosion effect parts, two PVN.4/3 Wappas, plus four Zeon and four Earth Federation soldiers (figures come molded in gray). A foil sticker and a sheet of waterslide marking decals are included.

Cute, deformed version of the AMX-011S Zaku III Custom. Kit is molded in color (stickers are included for detail areas with differing colors), and features snap-fit assembly. Limited poseability. Stands about 5cm tall when completed. Comes with rifle and bazooka parts. Can also be built as a standard Zaku III.

Promotion set inclusive of Gundam Dyname FG and Gundam Kyrios FG. 2 in 1 promotion of FG 1/144 00 series gundam as 1 gundam price. Simple instruction included in each box. Hurry while stock last.

• RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  
• New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  
• Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  
• Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  
• Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  
• Bring out the real attraction [of multi-colored armor.
  
• Launch of Kira Yamato, sitting figures included.
  
• Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)
  

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

• Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  
• But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  
• But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  
• Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!
  

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.