Gundam Deathscythe Hell as it appears in the Gundam Wing: Endless Waltz OVA. It features snap-assembly, is fully poseable and is molded in color. Large, bat-like wings on the back can fold around the model to produce a cloak-like effect. Of course the distinct beam scythe is included so you can recreate all the havoc-wreaking this suit does in Endless Waltz! Also included a 1/20 scale non painted Duo Maxwell figure.

The kit may be tiny but the ideals behind it are infinite! This 1/144 high-grade kit of the Justice Gundam is beautifully shot in colored plastic, with fantastic detail as is usual for Bandai. All parts snap together. Instructions are simple, clear illustrations, to make building a breeze. The finished kit is poseable thanks to several polycaps in the joints (but be careful balancing with that backpack on!). Stickers are included for detail. Paint and glue are not necessary, but paint might enhance the appearance of the finished model. History of Justice Gundam In mid CE 71, ZAFT created a series of advanced mobile suits based on technology reverse-engineered from the captured Earth Alliance G Project suits. Like their EA predecessors, the ZAFT Gundams are armed with advanced beam weaponry and protected by Phase Shift armor. One of these suits is the Justice, which can be considered the sister unit of the Freedom. Most of the Justice' and Freedom's systems were tested on the YFX-600R GuAIZ Experimental Firearms Type. Late in CE 71, Athrun Zala, former pilot of the Aegis, is assigned the Justice with the mission to either recapture or destroy its stolen sister unit, the Freedom. Instead, however, Athrun joins forces with his old friend Kira Yamato, in defending neutral Orb from an Earth Alliance attack. Later he met up with the support vessel Eternal which carried both METEOR units. Athrun and Kira used the METEORs' firepower to thwart an Earth Alliance nuclear missile attack on the PLANTs on the final day of the war, and Athrun also destroys the GAT-X131 Calamity with his METEOR's beam sword. Afterward, Athrun flies the Justice inside the gamma ray laser GENESIS and self-destructs it, preventing his father's doomsday weapon from firing on the Earth. Over two years later, a more close-combat-oriented advanced version of the Justice is built by Terminal, called the ZGMF-X19A Infinite Justice, which is again piloted by Athrun Source:Wikipedia

Infinite Justice Gundam

Starter Pack # 2. For those looking to get into the Gunpla Hobby, here's the perfect fit. This set will include the HG RX-78-2 Ver. G30th and come with a 'Step Up Manual' which will show you little tips and tricks to give your model a better look. It will also come with a Gundam panel line marker!

The two lead Gundams from "Gundam Seed Destiny" battle it out in this great SD Gundam set that includes easy snap-fit assembly kits of previously released BB Strike Freedom Gundam and BB Destiny Gundam, this time offered with a special sheet of marking stickers to detail up your completed kits! Each kit comes molded in color and uses polycaps for joints. The Action Base 1 & 2 shown in the first photo below are not included, sold separately.

• The star Mobile Suit from the second season of "Gundam 00" is now a sharp snap-fit model kit! 00 Gundam comes in easy-to-assemble plastic parts that are molded in color, along with a sheet of foil stickers, so painting is not necessary (but would add a more realistic appearance).
• Upon completion, its polycapped joints will give the Mobile Suit a wide range of motion for a world of posing possibilities! 
  
• The Twin Drive System (GN Drives on each shoulder) are flexible, and the included pair of GN Sword II can switch between Sword Mode and Rifle Mode. A fine kit of a well-designed mech!
  
• Add on XN-Raiser to become XN 00 gundam

Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

• With agility and arsenal galore, Gundam Seed's Buster Gundam was designed for action--and this High Grade kit from Bandai brings out this 'bot's best! 
  
• Typical Bandai HG quality with beautiful detail, snap assembly, and full poseability with poly-caps. Comes with stickers for the details that are not molded in color. Molded in Bandai's patented multi-gate technology that allows multiple colors on one tree. Parts are pre-colored, but painting will enhance appearance. Slick! 
  
•  Item Size/Weight : 29 x 19 x 6 cm / 265g
  

Item Size/Weight : 31 x 20 x 11.2 cm / 518g

• Item Size/Weight : 31 x 20 x 10 cm / 444g
  

Weight : 265g

- MS Wing Yui Hiiro hero, BB appeared in the warrior! - Variations in flight form? - Air-armed me! - BB Orijinarugimikku! The combined arms! Transform large arms! - Also provides colorful colors color and foil seal forming! - New policies adopted caps! Determine the various poses! - Accessories: beam rifle, shield, energy pack, the base

RGM-79(G) GM Sniper

• - "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  
• is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  
• Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1
  

BB Unicorn Expo Version

HG Astray Blue Frame

HG-grade kit of the new version of the Gundam Sandrock as it appears in the Gundam Wing: Endless Waltz OVA series. As usual, it features snap-assembly, is fully posable and is molded in color. Features two huge, curved scimitar-like weapons and a fabric cloak (yes, two sheets of fabric are included) that it can be configured in a number of ways. Includes unpainted figure of Qatre Reberba Winner, the pilot.

• RB-79 Ball Ver.Ka
  

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• 4th Platoon immortal] Jim Cannon II on the HGUC sortie! 
  
• Completely reproduce a serious, dignified form. 
  
• Camera head is clear and reproducible. 
  
• Beam Cannon is moving 90 degrees. 
  
• Reproduce the sword saber storage. 
  
• Various hand parts are included. 
  

Another one of the Innovators' superior Mobile Suits gets the HG plastic kit treatment, this time featuring Bring Stabity's melee-type Garazzo! This sharp snap-fit kit comes molded in color and features polycapped joints for striking action poses. It comes equipped with its signature pair of GN Beam Claws, and the shield part on its left shoulder armor can slide out to display it with GN Field activated. Garazzo's backpack houses the cockpit and its GN Drive, and can be detached from the Mobile Suit as an escape pod. A sheet of foil stickers and a display stand are provided. Accessories: 2 and 2 and 2 and special stand × flat part of the hand × 1 grasp person × beam saber Technology and Combat Characteristics Garazzo is designed to be a melee-type MS, possessing superior mobility, strength, and speed; capabilities that exceed those of A-Laws' GN-X MS units and highly formidable against Celestial Being's Gundams; Garazzo possesses enough physical power to subdue a Gundam. Garazzo has a similar appearance to Gadessa, retaining much of the frame and weapons such as the GN Cutters and GN Vulcans while having spikes to the head, shoulders, knuckles, and a large shield built onto its left shoulder. Its shoulder-shield can slide open to generate a GN Field, capable of deflecting and shielding against Celestial Being's beam weaponry. Its armament includes beam claws, stored inside the fingers of its hands, which can be combined into two beam sabers; these beam sabers have enough power to slice through 00 Gundam's GN Sword IIs. For long distance missions, Garazzo has a optional GN Booster that can connect to its legs and increase its speed. Garazzo also has an improved version of the GN Drive Tau that can rival the performance of a Third Generation Gundam's original GN Drive. There is a Gundam face hidden behind its face. Near the end of the war against Celestial Being, Garazzo was even equipped with its own Trans-Am System, of which its design was copied from Celestial Being via espionage. Source:wikipedia Reviews by Versus Z

Not just any custom-colored Mobile Suit of the Human Reform League's Tieren model, this hot pink Tieren Taozi is customized for the use of super-soldier Soma Peries! A highly capable machine that manages to battle on par with Celestial Being's Mobile Suits, the Tieren Taozi has a weapons loadout that includes a 200mm x 25 caliber smoothbore gun (space type), carbon blade, and a 30mm machine gun. Fully articulated upon completion with the use of polycap joints, this kit has other movable parts including its mono-eye and the flexible shields on each shoulder. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

• MS appeared in the person to be judged Mobile Suit Gundam Gaiden] Sega Saturn
  
• Commercialized in HGUC series [Blue Destiny Unit 2].
  
• Groin axis movable to reproduce the rifle poised by Standing knee.
  
• In addition to the normal moving around, the shaft shoulder is also reproduced on the mobile, can reproduce the scene more realistic shooting.
  
• Sort deployed in parts with the same storage unit on the outside of the shin saber reproduce the internal mechanism.
  
• Marking included.
  

MSM-04 Acguy