Mobile Suit Gundam UC] Kshatriya joined the SD series. A cute chibi version of the Kshatriya from "Gundam Unicorn" that comes with alternate beam sabers, real sub-arms in its binders, and a SD Lotto can switch between tank and mobile suit form!

• - New Gundam [Mobile Suit Gundam: AGE] lead aircraft [Gundam normal AGE-1] Prior to the anime
  HG series will be released on!
  - MS Gundam strongest personal growth of AGE-1.
  - Recreate the setting in the play.
  - Reproduced with clear parts such as the production of `light 'beam.
  - Chest and torso are introducing a ball joint, can also reproduce the `twist 'pose.
  - Assuming the pose of taking the easy, two-axis moving mechanism, and designing a rotating shaft.
  - WEAPON (Dodds rifle) ... the movable fore grip, hand gun mode and remove the barrel more
  Such a transformation, with a variety of gimmicks.
  - WEAPON (saber / beam daggers) clear plastic parts ... 'beam' is
  Short version Long version comes.
  - SHIELD (Shield) Shield ... You can install the arm, rotating shaft adopts a gimmick.
  In addition, the rotation mechanism of the forearm also reproduced.
  - Plastic color reproduction just set the color as assembled foil seal. Also,
  Runner-painted school colors that can satisfy even modeler, which is also divided into parts.
  
  - Accessories: beam saber, shield, hand grip with arms (left), flat hand (left hand only)

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

Raww Le Klueze (we prefer to think of him as Char, Junior), pilots the impressive Providence Gundam. This 1/100 scale kit of the Providence Gundam is just as impressive, with fantastic detail and lots of spiky things (the Dragoon System), as well as Beam Sabres and a Beam Rifle for weaponry. Molded in colour and featuring snap-fit assembly, so no glue or paint are required; polycaps for the joints assure that it's posable when finished. A little 1/20 unpainted PVC figure of Char I mean Raww is included as well.

• Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining!
  
• Includes a huge part Shainingufinga effects. God Gundam can be installed into.
  
• Fingasodo also included.
  
• Supermode can be reproduced with the deployment of replacement parts of the head!
  
• Koaranda removable.
  
• Accessories: hand grip for the left saber hand grip, left Shainingufinga, Bimusodo core length, Short Sword core beam, sword, finger シャイニングフィンガーエフェクトパーツ
  

- Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining! - Favorite horse [restart Fuuun] together make your emergency. - Reproduce the mantle retracted during deployment. Work which can be replicated in the play peek hand from the cloak. - The base of the cross is a master / sculpture unbeaten 144 east. By adjusting the cut position Can be held in Masutagandamu. - Includes: Cape (Osamu Osamu expanded range), cross-hand grip + master effects, amazing fist heaven Ishiba, left Hirate, Dakunesufinga left, right and left wrist postures

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

-A heavy-duty mobile suit that boasts overwhelming firepower is now available in GUNDAM UNIVERSE!

-Participated in the 4th Gundam Heavy Arms from [Mobile Suit Gundam Wing]. A playful product specification that reproduces the main weapons such as large volume beam gatling and armed deployment of various parts of the body.

-Armed parts of the body are deployed. You can reproduce the shooting scene.
-Massive proportions like GUNDAM UNIVERSE.
--Swiss Army knife can be deployed.
-Beam Gatling can be held by both hands with a foregrip.
--Beam Gatling can also be mounted on the back.

[set content]
? Main body
? Replacement wrist left and right
? Swiss army knife
? Beam Gatling
? Soul stage joint

• Bandai's Master Grade (MG) "RX-78-3" is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980 (the original kit is still available, by the way. 700 yen). 
  
•  Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. Panels on the legs flip open to reveal internal mechanisms. The head has a panel, too. 
  
• Even the "Core Fighter" cockpit ship can be removed from its belly. Fine mesh parts cover the inside of the chest air intakes for added realism. Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit. All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• The RX-78-3 kit is identical to the RX-78-2 except that it is molded in blue and gray plastic, rather than the more "festive" colors of the original.
  

Sharp HG kit of the main machine from "Gundam SEED Destiny", the Force Impulse Gundam. A neat design that transfers well to a HG kit, with parts molded in colour and all featuring snap assembly (so no glue or paint are required); and to make it even more appealing, the Force Impulse Gundam is transformable when finished, breaking down into the Force Silhouette, Chest Flyer, Leg Flyer, and Core Splendour! Instructions for building the model and for transformation are included -- all in Japanese but clearly illustrated for ease in use.

Bandai's new HG version of the new flying mecha from Gundam Seed does a nice job on this very attractive design, without making you spend a fortune! Check the pose in the lower right photo below; yes, this machine's legs are really that flexible, even in this scale! And those finned jet units off the back are very cool, too. Have fun!

Accessories: Shigurubureido, needle gun × 2 (reproduced only molded knee).

•  Accessories: Beam Lariat × 2 (× 2 beams on each side), shoulder tackle beam (beam on each side) × 8, Knee kick the beam (beam on each side) × 6
  

- Mysterious Enemy [UE (Enemy Unknown). - To reproduce the variation of the dragon type. - Reproduce the entire body poses in a play at full capacity. - Clear parts spec chest beam cannon. - Accessories: beam saber, hand grip (left), flat hand (left) According to wikipedia: The Gafran is the mainstay transformable mass production MS used by the Vagan nation, and is characterized by its humanoid shape. The Gafran shows superior traits than the RGE-B790 Genoace in terms of offense, mobility and defense. Prior to the appearance of the AGE-1, it was thought to be invincible. There are color variations but it is unknown what they are supposed to distinguish. It possesses the ability to transform into an alternate "dragon-like" mode. A common feature of these machines are the waist-mounted movable stabilizer wings . It appears that when encountering something new, the Gafran can scan it using a red light. What this scan does is unknown. Vagan machines are installed with a self-destruct mechanism in order to prevent technology and information from getting into the hands of the Earth Federation military . By A.G. 164, this function is removed from most Vagan MS [5]. The majority of the Gafran's weapons are fixed, save for the handheld Colony Destroyer weapon. The majority of seen Gafran have been blue in color, however occasionally a more uniquely colored unit is seen that acts as a commander to the standard colored ones. It is unknown if these units are technologically different or if the only changes are aesthetics. Weapons - Beam Rifle: Serves as the Gafran's tail when transformed. Its beam rifle can be held over or under the right shoulder when in use, it is a powerful long-range weapon that can destroy a mobile suit with one shot. - Beam Vulcan/Beam Saber: Mounted on both hands. Fairly effective at damaging or destroying most human made creations, however, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. Its beam vulcan also possesses the ability to generate a beam saber. - Diffuse Beam Cannon: Mounted in torso. Generates a very wide beam ideal for eliminating difficult enemies that stand before the Gafran. However, it wasn't powerful enough to damage the AGE-1 Gundam AGE-1 Normal. - Colony Destroyer: Used by the Gafran during the assault on Space Colony Nora, the colony destroyer was a large scale weapon with power that can deal critical damage to a colony.[1] Generally, since Vagan Mobile Suits have internal weapons, this colony destroyer is thought to be an exceptional strategic weapon.[1] The Colony Destroyer is shoulder-fired by a single Gafran that directs the weapon towards the target colony. Gundam Age Series - Unknown Enemy gunpla review Gundam Age Series - Unknown Enemy gunpla review Video 2 Gundam Age Series - Unknown Enemy gunpla review Video 3 Gundam Age Series - Unknown Enemy gunpla review Video 4

- MS-volume of the Earth Federation Army. - Clear plastic canopy specification reproduces the internal mechanical details. - Reproduce the entire body poses in a play at full capacity. - Visit each armed gimmick. - Comes with a variety of weapons! - Accessories: Beam Spray Gun, Heat sticks, hand grip with arms (left), flat hand (left hand only)

From Gundam Seed, the impressive and dark "Raider Gundam" in 1/144 scale is able to transform from Mobile Suit mode to Mobile armor mode, when completed. Fantastic design allows for high flexilibity and posing of the completed Gundam. Molded entirely in colored plastic and featuring snap-fit assembly, this is a fantastic new entry into the Seed lineup!

An excellent High Grade kit of the Chaos Gundam, from Gundam SEED Destiny. All parts are molded in colour with terrific detail; all parts snap together, for easy assembly. Polycaps for the joints allow flexibility and lots of great poses. When completed, the Chaos Gundam can transform to Mobile Armour Mode. Paint is not necessary but would definitely improve the look of the finished model.

From the incredibly popular newest entry into the Gundam universe, Gundam Seed, comes a High Grade version of the Forbidden Gundam. Molded expertly in colored plastic, featuring Bandai's innovated multi-gate technology (which allows multiple colors to be shot on a single runner), it's extremely well-detailed as is typical of HG kits. Joints are movable via polycaps. The backpack can be pulled up after completion and used as shielding, just as in the series. Stickers are included for details. Though it's molded in color, paint would definitely enhance the appearance of the completed kit.

Fantastic high-grade injection-plastic kit of the Saviour Gundam in 1/144 scale. Beautifully-molded all in colour; this coupled with snap-fit assembly means no paint or glue are required. Polycaps make the joints movable; and the completed model can transform into Mobile Armour mode. Foil stickers for detail are also included.

Andrew Waldfeld's customised Gaia Gundam can transform, when completed, between Mobile Suits mode and Mobile Armour mode. Parts are molded in colour and snap together; foil and clear stickers are included for detailed markings.

• Popular [Gundam UC] HGUC machine or higher than the strongest Jegan! 
  
• Provides a wide range of motion completely new mold! - Hand parts come with a variety of weapons! 
  
• Reproduce the moving frame of the base shield! (Replacement formula). 
  
• Comes with a seal of the `Team` Tri-Star, can be reproduced platoon! 
  
• Camera head is clear and reproducible. 
  
• Set up as a removable saber reproduction. 
  
• Removable covers grenades waist. 
  
• Accessories: saber x 2, shield, beam rifle grip only + For Saber wrist (left), fist (left), flat hand (left)
  

HGUC MSZ-010 ZZ Gundam Expo Version

Over a decade since the first MG Zaku II kit release and several MG Zaku II variations later, this Zeon MS finally gets the "Ver. 2.0" treatment with a completely revamped inner frame construction that allows for even greater range of articulation and realistic movements--you can even pose it kneeling on one leg as seen in the show! Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. Weapons include a Zaku machine gun, Zaku bazooka, heat hawk, and a pair of three-tube missile pods. Two types of blade antennas are thoughtfully included if you plan on building a Zaku II commander mass production type MS, plus two 1/100-scale pilot figures are also provided to man the MS. An incredible kit that's not to be missed!

• Best weapon can reproduce the cross-Sand Rock Crusher! - Combine the two bright show heat can also be a single weapon. Tell a cross-section shows Heat Crusher is left open to work. - Included beam machine gun! 
  
• Movable beam machine gun in stock and grip, can be transformed into storage forms.
  
• Accessories: shield, Huixiang x 2 Heat a large beam machine gun 
  

• It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  
• At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
• Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
• Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
• The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
• Accessory: Beam Rifle, Beam Sword x4

• New parts came with attachments! Action-based anime TV broadcasting time was unreleased. 
  
• Added design marking stickers, and military aircraft identification marks and numbers. 
  
• Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement.
  

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com