- Adele appears in the color only for the Devere unit! - Adele (ディーヴァ color) -- Mass-production machine of earth Union Army. - Accessories : ドッズ rifle only for Adele, shield, and beam saber x2

- MS heavy period Kio appeared in Part three. - Movable tail impressive. - Accessories: left and right hand grip, left and right palm. According to wikipedia The ovv-af Danazine is a mass produced Heavy Assault Vagan mobile suit appearing in the Kio Arc of Mobile Suit Gundam AGE. The Danazine is the Vagan's next generation mass-production mobile suit, intended to replace the older frontline mobile suits, such as the ovm-e Dorado. It is the primary mobile suit used by the Vagan during the invasion of Earth. During high-speed flight mode, the left and right head stabilizers are closed to cover the Danazine's face, while the legs are retracted. This mode allows the Danazine to reach speeds faster than most other mobile suits. It is armed with a beam cannon built into its waist, two beam vulcans on each hand and a combination beam vulcan/saber mounted under its chin. Weapons - Danazine Cannon : Mounted in the waist. It generates a very wide beam, ideal for eliminating difficult enemies that stand before the Danazine. - Beam Shooter:Mounted under the chin, it's a special beam vulcan gun that can also emit a beam saber. - Beam Vulcan/Beam Saber: Mounted on each hand. Fairly effective at damaging or destroying most human made creations. Also possesses a beam saber mode, like most Vagan mobile suits. - Danazine Spinner: The "tail" of the Danazine, which functions as a striking weapon capable of impaling enemy mobile suits.

HG 1/144 Cherudim is the second Gundam to come from the 00 Second Season line up. Whilst a direct continuation of the first season line, these latest kits boast certain improvements. Head The head is constructed like most HG Gundams, with a two part helmet, a face and a v-fin. Cherudim adds in a set of extra antenna, which connect via a tab and slot to the left side of the head. Further, the sniper Gundam's trademark target scope is sculpted as detail in the centre of the V-fin. Although usually hidden by the trademark red piece, you can remove that and stick it on to the top of the head in order to display the sniper scope. It's a nicely done effort which gets the kit off well from the word go. Torso The torso has rather blocky feel, losing the more circular aesthetic of the previous season. This is partially due to Dynames' optional armour cloak instead being directly built on to Cherudim's cockpit. It's clear evolution of previous ideas and looks somewhat like the Gundam is wearing a bullet proof vest. Ideal for the team's star sniper. Backpack On the back is a fairly generic Gundam backpack, in stark contrast to the previous cones/domes. Though far from just providing thrust, it also holds Cherudim's pair of GN Pistol II's (simple 3 piece constructions with rotating handles) and the Trans-Am use holoscreen. To mount this, two roughly rectangular shapes fold out about 180, so they're surrounding the head. You then plug in a single clear piece. The detail on the holographic scope is nice and sharp but is sadly lacking any colour, so you'll need to paint it to make it show accurate. Arms The arms of the kit use one of the best innovations of the season 2 kits- new wrist articulation. Before, most Gundams basically had a simple balljoint wrist. Not bad but not really much use, especially for posing with larger weapons. Here, the balljoints are still present but connect into a slightly smaller block which extends slightly into the forearm with vertical movement. This allows for much better range and posing, especially with Cherudim's rifle. I've struggled to get Dynames into a sniping pose but the combined arm articulation allows Cherudim to easily pull this iconic pose off. For hands you get two generic weapon holding hands a spare left hand with fingers sculpted in a curved grasp. Ideal for poses craddling the rifle. Legs The legs are perhaps the oddest part of the kit, kind of reminding me of Transformers Animated rather than Gundam. The feet have long fin on the back of each, rationalised as folding down to provide support from recoil when Cherudim is firing. Obviously there's no call for that on a plastic model, but the accuracy is appreciated and they do give the kit a little extra balance. Weapons Sadly, the rifle itself is less strong. Combination and transformation is the big theme of the season 2 Gundam weapons, a direct reference to how CB are no longer an unchallenged force on the battlefield. Cherudim's rifle can be built as a traditional long rifle or fold up to make a shorter gun. The problem is that rather than create a joing to allow the rifle to fold, you have to pull the front section off, turn it upside down and slide a chunky peg into a slot in the back half. It's not the worst design choice ever, but given recent 500/600 yen SD Gundam kits can have the same gimmick on a sword, it'd be nice to see a more expensive HG kit pull off likewise. The Cherudim doesn't have any sabers, but it's folding GN Pistol II's have a blade on the underside of the barrel. These pistols can transform via a simple folding joint from pistols to close combat weapons pretty well. They fit snug into the Cherudim's hands. Shield Bits Extending from Cherudim's butt in a slightly questionable practice is the unit's GN Drive, covered by several GN Shield Bits. The Bits are the main gimmick of the kit, a more defensive variation of the GN Fangs used by Zwei and Arche. These consist of nine identical panels, which are mounted on various places across the body; 2 on the left shoulder, 1 on each knee and 6 covering the GN Drive. A transparent plastic stand is provided, allowing you to display the Bits in hovering defensive action. Some variety is possible but you're pretty much stuck with them as floating shields, not the flying mini-guns Lockon can also use them for. Still, the thought is appreciated. Overall This is a decent kit. I'll admit I probably like the basic design of Dynames more, but Cherudim is far from the worse design out there and alot of the well handled kit engineering helps smooth things over for doubters like me. I don't think this is a must have kit, but it's a strong representation of the Cherudim design. Be sure to lock it on to your shopping basket.

• 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
• Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
• The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
• Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
• ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
• Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
• ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
• Item Size : 31 x 19 x 8 cm

Machine - HG Arios Gundam response support.
Adjunct: Rifle × 2, × 1 Arios connection parts, dedicated base

- Limited edition (only available for purchase together with DVD). - Now supplier wanted to sell, and I brought 3 units only. - Look exactly like MG 1/100 Gundam Unicorn Banshee Destroyer Mode. - Scale as : 1/144. - All the photo were taken by my low resolution handphone camera, so the picture may differ if taken in good camera - Hurry while stock last, thank you.

- Accessories: left and right hand grip, left and right palm - Item Size : 29.8 x 18.8 x 6.6 cm According to wikipedia The xvt-zgc Ghirarga is a Vagan mobile suit featured in the Kio Arc and Three Generation Arc of Mobile Suit Gundam AGE. The unit is piloted by Zeheart Galette. Like the xvm-zgc Zeydra, the Ghirarga is a next Generation Vagan mobile suit outfitted with enhanced compatibility with X-Rounders. It is based on an experimental machine designed for commander-use and has since been modified with emphasis on mobility as Zeheart's personal unit. The Ghirarga is made especially for all-ranged combat, incorporating previous technologies from other Vagan mobile suits. In addition to some of the weaponry from the Zeydra, it also has two new weapons: the handheld Ghirarga Spear and the Ghirarga Tail. The Beam Buster has also been upgraded in regards to firepower so as to be much more powerful than previous versions of the weapon, to the point where it is able to match up with the AGE-3's Sigmaxiss Rifle and AGE-FX's Stungle Rifle. Through the use of the "Mode X" configuration, the Ghirarga's X-rounder compatibility is enhanced, utilizing the "X-Transmitter" technology to wield the Ghirarga bits, remote weaponry capable of performing all-range attacks. Weapons - Ghirarga Spear: The Ghirarga Spear is the versatile hand-held weapon of the Ghirarga. It is able to generate a beam sickle from the tips of both ends and can also be separated into two components capable of generating a beam blade. Additionally, it can also function as a beam rifle for ranged combat. - Ghirarga Tail: Unlike most Vagan mobile suits, the Ghirarga's tail fuctions as a striking weapon similar to the Xvm-mzc Zeydars. Additionally it can be hand-wielded as a whip. - Ghirarga Bits: The Ghirarga Bits are beam-like all-range remote weaponry controlled by X-Rounder brainwaves. These bits can quickly take down an mobile suit squad. This weapon is only usable if the Ghirarga is in the "Mode X" configuration. - Beam Saber: The beam saber is the basic close range combat weapon of many mobile suits, both Federation and Vagan alike. However unlike the Federation beam saber, the beam saber used by Vagan mobile suits are generally mounted on the unit's hands, as opposed to being hand held like the Federation beam sabers. The beam saber of the Vagan mobile suits are generated from the unit's beam vulcans, allowing Vagan mobile suits to switch quickly from ranged combat to close range combat. The beam saber can easily cut through most mobile suits. - Beam Valcan: The standard ranged weapons for most Vagan mobile suits. These armaments are mounted both hands of Vagan mobile suits. These beam weapons have a high-rate of fire and are moderately powerful. They have been shown able to destroy small vehicles, buildings, and even mobile suits. In addition to being a ranged weapon, the beam vulcan is able to generate a beam saber for close range combat. Due to this feature, the beam vulcan armament can quickly switch to the beam saber, making the beam vulcan a versatile weapon.

• Accessories: Long Cannon Sigma system (stored in the arm guard) beam saber × 2, Stand 
  
• Item Size : 29.8 x 18.8 x 7.5 cm 
  

• Mobile Suit Pirate Gundam Line!!  
  
• Includes: Dodds rifle llB, Shield, beam saber x 2  
  
• Another Pirate Gundam AGE-2 Dark Hound comes out together!!  
  
• Item Size : 29.8 x 18.8 x 5.5 cm. 
  

- Pirate Gundam appeared! Of its identity ...?
- Characteristic hooks on the wings, the injection can be reproduced in the lead line of accessories.

- Accessories: Dodds Lancer, anchor shot x 2, beam saber x 2

- Accessories: beam saber × 2, beam rifle, saber grip for (left and right), For the rifle grip (left and right) - Item Size : 31 x 20 x 10 cm

- Be equipped with a large backpack on his back. Light clothing by removing a type of reproduction. - Side armor can be changed by replacing the tube part to attack the state. - Item Size/Weight : 31 x 19.1 x 7.8 cm / 293g

- Mobile Ginn Miguels Ginn - scale: 1/144 - simple graphical instruction included in the box.

CGue equipped with a new weapon appeared in HG! The large beam cannon of both shoulder is rotationally movable, and the shooting pose can also be reproduced. And the rear thruster of the large beam cannon also has moving parts. In addition, a clear part is adopted as a large sword, and the beam generation state is reproduced realistically. Marking shield is included. Gunpla is a dimensionalized plastic model of mobile suits that appears in the series of "Mobile Suit Gundam", robots and battleships called mobile armor. 

Slaughter Dagger -- strange name for a mecha. Perhaps Bandai might come up with another variation of this mecha and call it "Butcher Knife!" 

- Depending on what Mobile Suit Gundam SEED remastering, even HG SEED Gundam series Fully renovated! - Anime [Mobile Suit Gundam SEED] HD Remastered decide! Future expansion to match the picture, Mobile suit to cover a number of [Gundam HG Series] Released renewal! - Redesigned the packaging design? Gundam latest packages in the history of evolution SEED10 anniversary Innovation in design. - If SEED is reproduced in action poses! Action Base 2 (sold separately) can be connected to the corresponding New parts came with attachments! Action-based anime TV broadcasting time was unreleased. The use of this new parts, pull out the potential of mobile HG, SEED-specific The air can take a dynamic action poses. - Set the color to the color re-mastered re-forming! The Gundam animated to match the HD Remastered Reconfiguration of forming color. Anime became more faithful color reproduction, UP is also mature. - Added design marking stickers! Military aircraft identification marks and numbers, affiliation, just put Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement. ( This is a machine translation. Please allow for possible misinterpretations in the text. ) Item Size/Weight : 29.8 x 19 x 6.8 cm / 258g

- Based on the popular manga series "Advance of Zeta: The Flag of Titans" and designed by Kenki Fujioka.

• ZGok Char customise with shining Red ver!
  
• The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series.
  
• The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws
  

- Bandai [03] - SD Gundam Zhao Yun Gundam. - Completed modal in a box. - Manufactured by Bandai. - Original price is 59.9 now selling at 18.00.

The RGM-89De Jegan [ECOAS Type] (aka Jegan "Four Eyes") is a general-purpose special operations mobile suit based on the RGM-89D Jegan for use by ECOAS. Includes Bazooka, Beam Saber, Beam Rifle, and a shield. Visor on head can also slide down to recreate appearance when using its more powerful cameras.

Here's another cool "Clear Color" release from Bandai! Strike Rouge follows the same design as its previous Master Grade release with the exception of its new, crisp, clear color scheme. Its parts appear almost crystal-like, and, though they are colored, they are transparent. This version of Infinite Justice is just made to shine under the proper lighting! Like all of the Bandai Master Grade model kits, this Strike Rouge Clear Color Ver. is completely snap-together with parts that are molded in color so no paint or glue is needed to complete it. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. This Strike Rouge Clear Color Ver. Master Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.

- HGUC commercialized in the base-Jabbar of the big success in aerial combat of [Black Unicorn] episode 5! - Expansion and contraction of the foot corresponding to the various MS Panel! - In an action-based support, reproduce powerful battle scenes! Use the included landing gear (It is also possible to get to the ground. ) - Sub-flight system for the operation of the base-Jabbar in the air ... MS (SFS). Jet heat kernel With a function-propelled hovercraft. Geta `alias`. - Accessories: Landing Gear (closed-open)According to wikipediaThe Base Jabber is a single MS Carrier/Flight System that first appears in the anime series Mobile Suit Zeta Gundam. It is designed to have a Mobile Suit stand on top of it as it flies. Using this sub flight system, mobile suits which have extremely sloppy movement speed under gravity, can improve its mobility, while gaining limited flight capability, and hence able to accomplish operations swiftly and solidly.Weapons- Mega Particle Canon: The forward section of the carrier has a Mega Particle cannon which is mainly seen used for support during battle.

• Reproduce each flight form & 3 software form, appearance Gundam AGE-3! 
  
• In addition to core deformation Fighter recombination, can reproduce the form of each! - Normal ... σ rifle system, the storage conditions can be attached to the back pack grip. 
  
• Moving the ball joint is the root system Σ Fortress ... Cannon. 
• Orbital ... side skirts thrusters, thruster movable back shoulder ball joint. 
• Surplus parts, can be stored in a dedicated hanger!  
• Accessories: rifle system, hardware Fortress, Cannon system × 4, orbital hardware, Long Cannon sigma system, surplus parts hanger.
  

• Item Size/Weight : 30 x 19 x 5.3 cm / 234g
  

- One of the more overdone designs in Gundam! - This HG kit of the Legend Gundam comes with the clear blue "trails" leading from the whopping big Dragoon Unit. - All the parts are molded in colour and snap together for ease in assembly. - No base is included, though you can mount the finished model on the bases that have been included in previous HG kits Item Size/Weight : 31 x 19 x 7.6 cm / 314g

A custom Flag unit for Graham Aker operated by the Union in the TV series "Gundam 00". Can transform from mobile suit to flight unit mode. Special Rifle and beam saber included.

Item Size/Weight : 20.5 x 15 x 5 cm / 162g

SD Epyon non-scaled.