• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Brand

Availability

Gundam Model Kits

Showing 931 - 960 of 2625 products

Quick View
img
SAVERM149.90

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the -  ??Red Comet, -  ?? Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM270.00
RM270.00 Request Stock
Quick View
img
SAVERM32.90

[R17] HG 1/144 Perfect Strike Gundam

  • Accessories: 350mm gun launcher, anti-ship Vulcan 120mm, anti-ship sword (belt Geberu Pradesh), Beam boomerang (Midas Messer), rocket anchor (Panzer Eisen), Yale Pack, Beam saber x� 2, hand grip for arms (left and right)
Wikipedia
The GAT-X105+AQM/E-YM1 Perfect Strike Gundam is the heavy armed variant of the GAT-X105 Strike. It was featured in the eyecatches of the Mobile Suit Gundam Seed HD Remastered. Later, the Perfect Strike Gundam made its first debut in the episode 36. The unit is primary piloted by Mu La Flaga.
 
The Perfect Strike Gundam is the possible end-point of how the original three Striker Packs of the GAT-X105 Strike Gundam could have been used. The combination allows the Strike to have the agility of the Aile Strike Gundam, the heavy firepower of the Launcher Strike Gundam and the close range power of the Sword Strike Gundam at the same time, making it virtually the perfect weapon without losing performance. As well, having all three Striker Packs connected at the same time allows the Strike Gundam to stay active for much longer than having just one Striker Pack on its back.
There are a few visible changes to the Aile Stiker Pack as it's main wings been moved back slightly to make room for the connection points for the "Schwert Gewehr" Anti-Ship Sword, "Agni" Hyper Impulse Beam Cannon and four extended batteries connected on the Aile Striker Pack's back.
 
List of weapons:
  • "Igelstellung" 75mm Multi-Barrel Anti-Air CIWS
  • "Armor Schneider" Combat K-nife
  • 57mm High-Energy Beam Rifle
  • Shield
  • Beam Saber
  • "Schwert Gewehr" 15.78m Anti-Ship Sword
  • "Panzer Eisen" Rocket Anchor
  • "Midas Messer" Beam Boomerang
  • "Agni" 320mm Hyper Impulse Beam Cannon
  • 120mm Anti-Ship Vulcan Gun
  • 350mm Gun Launcher

RM68.00
RM68.00 Request Stock
Quick View
img
SAVERM23.90

[052] HGUC 1/144 RMS-108 Marasai Gundam

  • Item Size/Weight : 31 x 19 x 7 cm / 295g
  • Snap and fits conditions, comes with minor decals.
  • Normal mobility, but looks quite flexible and nice curve in the gundam modelling kits.
  • Weapons included are: beam saber x2 (yellow color), vulcan gun, and beam rifle.

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM26.60

[031] HG 1/144 Clanche Custom

  • Accessories: Dodds rifle, shield, beam saber
  • Item Size/Weight : 30 x 19.2 x 6.8 cm / 275g.

Wikipedia Information about Gundam Age Clanche Custom:
The RGE-G2100C Clanche Custom is a custom variant of the RGE-G2100 Clanche featured in the Kio Arc and Three Generation Arc of the anime series Mobile Suit Gundam AGE. The unit is piloted by Seric Abis.

The RGE-G2100C Clanche Custom is a sea green-colored variation of the RGE-G2100 Clanche. It is primarily assigned to squad leaders[1]. Just like the Gundam AGE-2, the Clanche Custom is designed as a high speed combat unit, able to turn into a fighter-like form which flies at a greater speed than that of its MS mode. While in flight mode, it is able to use two beam cannons in place of wings. It is equipped with the basic weapons such as the DODS rifle, three beam sabers, two beam vulcans, and a shield.

Weapons & Shield:
  • DODS Cannon - Based on the ones used by the AGE-2DB Gundam AGE-2 Double Bullet, the Clanche Custom is equipped with two beam cannons in place of its wings and usable only in flight mode.
  • Beam Saber - The standard close range combat armament for most Federation mobile suits. The beam saber is a sword-like beam weapon that is used for close combat. The beam saber can easily cut through most mobile suits. A beam saber is stored in each of Clanche's wrists, while another beam saber is stored in the shield.
  • Beam Vulcans - The beam vulcans are located in Clanche's head. These head mounted beam weapons have a high-rate of fire but have little power and are generally ineffective against advanced Vagan mobile suits. However these weapons are ideal to shoot down fast moving, lightly armored targets such as missiles and vehicles.
  • DODS Rifle - The DODS Rifle is the standard ranged combat weapon for most Federation mobile suits. The Clanche's DODS Rifle is a mass produced version of the AGE-2 Gundam AGE-2 Normal's Hyper DODS Rifle.
  • Shield - The Clanche's basic defensive armament. It is a fairly standard shield usually mounted on the left forearm. It can defend against both beam and physical attacks.

RM50.30
RM50.30 Request Stock
Quick View
img
SAVERM32.90

[032] HG 1/144 Gundam AGE-FX Burst

- Accessories: Long rifle guru Stan, funnel × 6, funnel × 8 (short), effect parts × 18,
Dedicated pedestal

RM75.00
RM75.00 Request Stock
Quick View
img
SAVERM28.70

[033] HG 1/144 Shaldoll Rogue

  • Accessories: Buster Dodds, beam ax, saber

RM48.20
RM48.20 Request Stock
Quick View
img
SAVERM19.90

[378] Legend BB Devil Dragon Blade Zero Gundam (SD)

  • Accessories: Sword Thunder Dragon, Falcon Sword, Faith Dorango emissions (ver.I · ver.II),Royalty Earth Light (ver.I · ver.II), Dragon Brest (ver.I · ver.II)
  • Item Size : 31 x 20 x 5.5 cm

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM15.90

[377] Legend BB Musha Godmaru

  • Accessories: Katana sword Bakuretsu break, heat
  • Item Size/Weight : 31.3 x 20.2 x 5.7 cm / 234g

RM44.00
RM44.00 Request Stock
Quick View
img
SAVERM75.90

MG 1/100 WD-M01 Turn A Gundam

  • To analyze carefully the drawings by Syd Mead, ? Gundam pursuit of ideal image.
  • Exhaustively reproduce fine detail across the entire body.
  • Reproduce the structure of the chest and thruster vanes. Hatch open the chest.
  • A dedicated beam rifle, shield, and comes with a hammer.
  • Roland Seakku pilot figure of 1 / 100 scale [cattle] included.
  • Item Size/Weight : 31.1 x 20.3 x 13.4 cm / 735g

RM152.00
RM152.00 Request Stock
Quick View
img
SAVERM4.80

[048] SDBB Tallgeese

  • Item Size/Weight : 19 x 13.1 x 4.6 cm / 101g

RM19.10
RM19.10 Request Stock
Quick View
img
SAVERM7.80

[010] SDBB Zeong (Last Ver.)

  • Item Size/Weight : 19.1 x 13 x 4.8 cm / 98g

RM16.10
RM16.10 Request Stock
Quick View
img
SAVERM7.80

[09] FG 1/144 Launcher Strike Gundam

  • Item Size/Weight : 20.5 x 15 x 5.2 cm / 134g

RM21.10
RM21.10 Request Stock
Quick View
img
SAVERM7.80

[15] FG 1/144 Forbidden Gundam

#15 Forbidden Gundam 1/144

RM21.10
RM21.10 Request Stock
Quick View
img
SAVERM6.90

[052] SDBB Blue Destiny Gundam

RM17.00
RM17.00 Request Stock
Quick View
img
SAVERM7.80

[044] SDBB Gundam Double X (SD)

RM16.10
RM16.10 Request Stock
Quick View
img
SAVERM54.90

[011] RG 1/144 Destiny Gundam

  • RG 11 bullet will be Destiny Gundam protagonist machine [Mobile Suit Gundam SEED DESTINY]
  • Finally here!
  • Also made by the Freedom Gundam ZAFT, Gundam and Justice
  • Destiny Gundam. Dropped into the [real] and its setting in this product,
  • Are using the Advanced mode in common with MS MS joint above. However,
  • At the same time to pursue your own settings to reproduce the Destiny Gundam, the exterior parts
  • How to install or Ikashi are the ones that are different from the previous two products RG series of body
  • Has become.
  • Armored division fine considering the actual machine, unique feature of RG. Such as the joints,
  • You can put a realistic decals, plans to reproduce the metal-like texture.
  • Also boasts a wide range of range of movement in the air `` poses unique appearance ?? SEED
  • Advanced mode can be reproduced by the joint MS.
  • Long-range beam cannon weapon variety, such as a beam shield included.
  • Also a characteristic wing, three-dimensional by actual investigation. Can be replicated gimmick wings and weapons deployment.
  • Accessories: beam rifle, beam saber ? 2, beam shield, shield,
  • Beam boomerang ? 2, beam sword, long-range beam cannon

RM95.00
RM95.00 Request Stock
Quick View
img
SAVERM180.00

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Titanium Finish Ver.

  • Black Unicorn Gundam Banshee, reincarnated as a Master Grade kit! 
  • Includes transformation mechanism into Unicorn mode! 
  • Appearing in the final scene of Mobile Suit Gundam: Unicorn episode 4, the Unicorn Banshee is fully reproduced here, including the full transformation system. 
  • Transformation from destroy mode to Unicorn mode is completely replicated. Moreover, the Psychoframe has been recreated in a UV sensitive material that illuminates under black light. 
  • Armed Armor VN features deployment gimmick.
  • Beam tonfa gimmick included. 
  • Armed Armor BS includes barrell details and deployment gimmick
  • RX-0 Unicorn Gundam 02: Banshee- revealed at the end of episode four, this mysterious Suit is capable of shifting into Destroy mode, and is massively powerful- but is it friend or foe?
  • Accessories : Armed Armor BS, Armed Armor VN, Beam Saber x4 (Beam Effect x2), Action Base Joint, Pilot Figure (Sitting, Standing), V Fin (Transformable), V Fin (Destroy Mode, Unicorn Mode)

RM480.00
RM480.00 Request Stock
Quick View
img
SAVERM138.90

MG 1/100 RGZ-95C ReZEL Type-C (Defenser a+b Unit/General Revil)

  • MG 1/100 ReZEL TYPE-C (DEFENSER a+b UNIT/GENERAL REVIL CUSTOM) 
  • ReZel for General Revil from ""Mobile Suit Gundam UC episode 6"". 
  • The missile-equipped a-unit and the launcher-equipped b-unit are exchangeable. 
  • Its distinctive orange and grey colors are expressed in injection colors. 
  • runnerx26, foil sticker x1, dry decal x1, tetron sticker x1, instruction manual x1

RM250.00
RM250.00 Request Stock
Quick View
img
SAVERM26.60

[011] HG 1/144 Over Flag

  • SVMS-010 Over Flag (HG)
  • Item Size/Weight : 29.7 x 18.9 x 5.8 cm / 234g
The SVMS-01O Over Flag (aka Over Flag), is a custom enhanced Flag by Professor Ralph Eifman and Billy Katagiri. This elite series of the Union Flag was a limited production mobile suit for the ace pilots of the Anti-Gundam Investigative Squad "Over Flags" (The 8th Independent Air Tactics Squad).

Weapons
  • 20mm Machine Gun
  • 200mm Linear Rifle
  • Defense Rod
  • Leg Missiles
  • Sonic Blade
  • Chaff Flare Dispenser
  • Missile Pods

RM45.30
RM45.30 Request Stock
Quick View
img
SAVERM19.90

[002] HG 1/144 Union Flag Mass Production Type

  • This simple HG kit of mobile suit Union Flag from "Gundam 00" will be fully articulated and can switch between MS Mode and Flight Position upon completion, with plenty of joints to allow for recreating its various signature action poses. Weapons include a linear rifle, sonic blade (plasma sword), and a defense rod. A sheet of foil stickers is included for detail.
  • Item Size/Weight : 29.7 x 19 x 5.3 cm / 234g

RM40.00
RM40.00 Request Stock
Quick View
img
SAVERM98.90

HG 1/144 GN Arms Type E + Gundam Exia

  • action base included
The GN Arms is a limited-produced series and the successors to the GNR-000 GN Sefer series. Only two units were created and both of them were modified to reflect the combat themes of their respective assigned Gundams; GN Arms Type-E is fitted to complement GN-001 Gundam Exia. Although fitted after Gundam Exia, GN Arms E retains similarities to its counterpart and its components are one part of an overall tactical support system.

For weapons, the GN Arms was designed to utilize different weaponry between its fighter and mobile armor (MA) form. Although armed with a specialized silhouette, it has limitations depending on its form. The units are armed with two sets of weaponry: standard and customized.

The standard weaponry is featured in both units; both are armed with a pair of Large-Size GN Cannons and GN Claws. The cannons are hidden at the top-rear hatch, right on top of the thrusters. The top hatch provides protective shielding for the cannons as it is the most powerful (comparable to Gundam Virtue’s GN Bazooka) and vulnerable (its destruction can destroy the entire craft) in combat. The GN Claws is a three-pronged weapon inherited from the Gundam Avalanche Exia Dash armor system. It is a melee-type weapon, meant for close range bird-of-prey style attacks. However, the original GN Claws was built with beam sabers for extended reach and had greater attack capabilities against its enemy target(s); CB engineers (for some unknown reasons) removed that ability, limiting these particular GN Claws for mainly latching and tearing against its target(s). The claws are located at the underbelly of the GN Arms; they’re folded within the lower platform until deployed. However, while its standard weaponry makes it formidable, it is its specialized weaponry that gives the GN Arms its unique combative qualities.

GN Arms E's customized equipment are its pair of Large-Size GN Swords and the GN Guns. The swords are larger versions of Exia’s swords; they’re GN particle-laced vibro-swords designed to cut through large targets (ex: mobile armors, spaceships, asteroids, etc). However, they’re specifically designed to puncture through GN Fields in case their enemy(s) managed to acquire GN technology. Designed after Exia's primary weapon, the GN Guns are built behind the sword. Although called guns, their firepower is comparable to Dynames' GN Rifle. The overall weapons silhouette gives the pair of gun-swords a focus in close-quarters combat (CQC), but balanced for mid-to-short range firing solutions.

In terms of systems, the GN Arms is powered by GN particles. The units are built with GN Condensers to store a limited supply of particles; its pilot must be mindful of its particle reserves or risk a power-down in a compromising tactical position. However, the units are designed with a docking system that connects their respective Gundams’ GN Drive to help recharge their particles for extended operation usage. Celestial Being engineers also installed a GN Field for added protection against enemy attacks. While not built into the GN Arms, either units can utilize the Trans-Am System through their Gundams during emergency situations to temporarily enhance three times their normal combat capabilities. However, its overall systems risk reduction in performance after all its particles are expended.

For combat, its native form is a fighter: GN Arms Mode. Able to fly in outer-space and Earth’s atmosphere, it can only utilize the GN Guns and Large-Size GN Cannons for high-speed heavy assault combat; it relies on its speed to flank and shoot down its target(s), similar to traditional aerial dog fighting. Unfortunately, its remaining weapons and abilities are offline in this form and its weapons are locked in place, lacking flexibility and dynamic firing solutions. As fixed weapons, they are limited to shooting down its target relative to the body positioning of the unit itself. While the units can deploy a GN Field, it was never used in this form; it suggests GN Arms either can't deploy its GN Field or has limited usage in its fighter form. Another weakness are the units' limitations in traveling between Earth and space; to compensate for those weaknesses, the Assault Container can be deployed to for enhanced tactical operations.

Celestial Being engineers realized the GN Arms have limitations exiting Earth’s atmosphere and its overall mass is too great to fit into a linear train for a ride back into space. While not designed for the sole purpose of being an atmospheric shuttle, the Assault Container (AC) is a heavily armed tactical mini-MS carrier that can safely house Exia and GN Arms through some of the most treacherous conditions; the GN Arms bears little involvement in operations when docked.

When combined with the AC, the GN Arms’ overall systems are not utilized other than its thrusters (providing additional thrust power to account for its added weight into the AC). Its overall body is safely shielded within the confines of the AC along with its respective Gundam (although they’re not docked together in any special configuration). Combined with the Gundam and powered by its GN Drive, the pilot of the GN Arms is transferred through a special lift and ported over the AC's helm for manning its flight controls and weapons; the AC is in complete control and the GN Arms is just along for the ride. However, should the container become compromised, the pilot can immediately transfer back into the GN Arms and eject Exia to escape and can recombine as a MA for advanced combat.

When transforming into GN Armor, the pilot expands the unit into a large exo-suit combat system. The GN Arms opens in such a way that Exia simply "falls" its back onto the GN Armor, lock in place, and utilize its systems in a matter of seconds. The cockpit folds up and rotates to the rear of its frame. The mid-section expands and exposes a special docking module that docks directly with Exia's GN Drive Cone. The lower modules fold out to reveal its GN Claws and foot platform to dock with Exia's legs. Its fixed weapons are now unlocked and widened for Exia's arms to dock and utilizing it as an extension of its arms.

In GN Armor combat, the armor is co-piloted by Lasse and Setsuna; the full aspects over its controls are not fully defined and its capabilities is based on observation. In battle, Setsuna has full control over Exia while Lasse seems to handle mainly propulsion and the MA's cannons during combat. Setsuna's influence over the MA seems to be limited to its control over the armor's GN Guns, Large-Size GN Swords, and the GN Claws; he relies on Lasse for evasive maneuvers, firing the cannons, and deploying its GN Field against enemy fire. Should the the GN Arms becomes critically damaged, Exia can simply pull itself out of the MA and resort to MS combat.

Overall, the GN Arms units had proven their value in combat, however, it would be the last of its kind. While Celestial Being engineers continued to produce new support units in its GNR series, Celestial Being ceased creating of any kind of mobile armor. Instead, Celestial Being engineers focused on developing equipment to enhance the combat capabilities of their Gundams; it eliminates the need for mobile armors since their individual capabilities can surpass them. However, the combat and technical data of the GN Arms was used to help CBS-74 Ptolemaios 2, a multi-purpose warship that supplements and succeeds the GN Arms as the Gundams' most powerful combat support unit.

RM230.00
RM230.00 Request Stock
Quick View
img
SAVERM33.90

[062] HG 1/144 Gundam Astraea Type-F

  • Gaiden Official MS, Astraea Type F of the new armed goods! 
  • New settings, including militants, HG reproduced as heavily armed militants were used to scale! 
  • Basic protocol as Astraea armed GN sword, shield, GN Launcher 
  • GN beam rifle comes. 
  • Add new armament: GN missile Hand, GN pistol, bazooka for jinx 
  • New configuration: GN hammer ([thorn] GN reproduce the clear green parts of the jet of particles. Comes with a wire during injection can represent a hammer.) 
  • Type F2 also available to the Assembly in the selection formula. 
  • Accessories: proto GN sword, GN launcher, shield, GN beam rifle, GN missiles hand 
  • GN beam saber × 2, GN pistol (with holster) × 2, bazooka jinx

RM74.00
RM74.00 Request Stock
Quick View
img
SAVERM48.50

1/100 SVMS-010 OVER FLAG

The elite Over Flag variable Mobile Suit from "Gundam 00" model kit is here in 1/100 scale! Molded in color, the black Over Flag will be fully articulated upon completion thanks to pollycapped joints, and can also switch between its MS Mode and Flight Position. Weapons include a new type linear rifle, two sonic blades, two plasma swords, and a defense rod. Sharp mechanical detail can be seen on the linear rifle, thrusters, landing wheels, and wing flaps. A sheet of foil stickers and a sheet of Over Flag team marking stickers are provided. Three in-scale figures are included, molded in white: Graham Aker in a pilot suit and two Union ground crew members.

  • An exquisitely designed model of the “Over Flag” in 1/100 scale!
  • The sharp appearance is designed to evoke the image of a fighter jet when transformed.
  • Translucent plastic is used for the facemask, and includes molded sensor unit detail.
  • Features accurate interior details such as jet turbines.
  • Weapons include a linear rifle and plasma cutters (x2), and the hilts of the plasma cutters can be stored in the forearms, just like the animation.
  • Includes 1/100 scale pilot, maintenance, and runway guide person figures.

RM83.40
RM83.40 Request Stock
Quick View
img
SAVERM39.90

[152] HGUC 1/144 RGM-96X Jesta Cannon Gundam

  • Jesta Cannon, the heavy weapon equipped variant of Jesta, featured in "Mobile Suit Gundam UC episode 6", appears as HGUC. 
  • The distinctive beam cannon and multi launcher on the shoulders have moving gimmicks. 
  • Includes weapons and hand parts which are compatible with Jesta. 
  • runner x10, foil sticker x1, tetron sticker x1, instruction manual x1

RM80.00
RM80.00 Request Stock
Quick View
img
SAVERM30.90

[153] HGUC 1/144 Unicorn Gundam 02 Banshee Norn (Unicorn Mode)

Banshee Norn in its Destroy mode configuration with all new translucent orange frame parts. Beam magnum with revolving launcher can mount a beam jitters and also comes with spare magazine clip. Armed Armor XC and Armed Armor DE are fully deployed, revealing the massive "mane" of this black lion themed Gundam. 

Accessories: 
- Beam Magnum (with revolving launcher)
- Shield,armed armor DE
- Beam saber × 2
- Armed armor VN

RM70.00
RM70.00 Request Stock
Quick View
img
SAVERM74.90

MG 1/100 RGM-96X Jesta

  • Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
  • Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
  • Movable shield arm can hold the shield against the backpack or in a usable position! 
  • Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
  • Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
  • With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
  • Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

RM165.00
RM165.00 Request Stock
Quick View
img
SAVERM29.90

[151] HGUC 1/144 MS-06R-1A Zaku II (Black Tri-Stars Custom)

  • Accessories: - Zaku bazooka, Zaku-machine gun, Heat Hawk, shield weapon rack, fist (left), for hand holding rifle (left and right), for hand held saber (right)

RM66.00
RM66.00 Request Stock
Quick View
img
SAVERM26.90

[034] HG 1/144 G Xiphos

  • Accessories: Heat Sword high output, Dodds Buster H x  2

RM62.00
RM62.00 Request Stock
Quick View
img
SAVERM27.90

[154] HGUC 1/144 MS-06R-1A Zaku II (Shin Matsunaga Custom)

The MS-06FS Zaku II (Shin Matsunaga Custom) is a mobile suit from the MSV-R series. It was the personal unit of Shin Matsunaga.

Similar to Garma Zabi's MS-06FS Zaku II (Garma Zabi Custom), the MS-06FS Zaku II (Shin Matsunaga Custom) is a custom mobile suit piloted by lieutenant Shin Matsunaga. It has been subjected to performance tune-ups requested by him, in addition, its mobility pushes the performance limits of the FS Type.

RM68.00
RM68.00 Request Stock
Quick View
img
SAVERM27.90

[035] HG 1/144 Gundam AGE-1 Full Glansa

  • Built for the final battle of Mobile Suit Gundam AGE, the Full Glansa joins the HG line! 
  • Developed after the the AGE-1 Flat was critically damaged, this upgraded MS boasts high mobility and powerful armaments. 
  • 3 kits in one- Glastron Launcher is removable to recreate the AGE-1 Glansa, and Glansa armor can be removed to create the AGE-1 Flat! 
  • Glastron Launcher can rotate into firing mode.
  • The upgraded Gundam AGE-1 Flat, the Full Glansa features the massive Glastron Launcher for added firepower and mobility! 
  • Accessories: Shield Rifle x2, Glastron Launcher x2, Missile Launcher x2, Beam Saber x2

RM68.00
RM68.00 Request Stock

Showing 931 - 960 of 2625 products