The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

• Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  
• Zeta Gundam, the best of both models. Gimmick Built-parts issue.
• Expand the abdomen and the head cover in conjunction with mobile chest.
• Work together to deploy a dedicated beam rifle scope barrel / grip /.
• Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
• Deformable skeleton (full frame mover) in combination with external armor
• Pursued the reality of the Mobile Suits.
• Combined with a snap-fit \u200b\u200bassembly and service.

• The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
• In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
• The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
• The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
• The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
• The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
• The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
• Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
• Riddhe Marcenas figures (standing and seated) are included. 
• Includes original marking stickers. 
• Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60