• It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  
• At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
• Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
• Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
• The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
• Accessory: Beam Rifle, Beam Sword x4

• New parts came with attachments! Action-based anime TV broadcasting time was unreleased. 
  
• Added design marking stickers, and military aircraft identification marks and numbers. 
  
• Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement.
  

Mecha OverviewThe third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium Stamen is the core component of the incredible weapons system known as the Gundam GP03. Designed to operate in conjunction with the armed base Orchis, the Stamen is equipped with tail binders to lock it in position, and its forearms unfold into special manipulator claws which are used to grab weapons from the Orchis's weapon containers. The Stamen was, for the most part, a standard type of mobile suit, although it did incoporate some differences from other "normal" Gundam prototypes. Instead of the costly Core Block System, the cockpit was of the panoramic cockpit display originally tested in the Gundam Alex. The usual head vulcan guns were absent, replaced by an advanced sensor and avionics package. The backpack was composed of a "docking binder" system to link up with and control the Orchis mobile weapon component. The arms also each incorporated a large, folding manipulator arm, which was used to retrieve the Stamen's own weapons from their storage racks in the Orchis' weapons container pods. The GP03S Stamen was completed at Anaheim's Von Braun City factory and delivered to their La Vie En Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. On November 11, the mobile assault carrier Albion arrives at La Vie En Rose, and its crew commandeer the Gundam GP03 as a replacement for the destroyed GP01. Over the next two days, pilot Kou Uraki repeatedly takes this experimental superweapon into battle against the Delaz Fleet. Both the Stamen and Orchis components appear to survive the conflict intact, but their final disposition is unknown, and all records of them are erased in March of the following year.Source:angelfire.com

• Awesome HG kit of the all-powerful and intimidating Gundam GP02A as appeared in the MS Gundam 0083 Stardust Memory OVA. 
• It's a simple snap-fit plastic kit of GP02A that comes with all of its weapons used in the OVA including the giant bazooka and a super thick shield. 
• Included in this kit is a Display Stand that can hold GP02A as if it's floating in space. 
• The display base also allows for another stand attachment where GP01 (sold separately) can be attached for a beam saber fight display with GP02A as seen in the OVA series.
  

Reissue Date : Jun 2020Estimate Delivery : July 2020
This is an expansion set! MG 1/100 Victory 2 Gundam Ver. Ka sold separately!

---

Expansion parts for reproducing Victory Two Assault Buster Gundam Ver.Ka by jointing with the MS body (sold separately) available in retail stores is released !

---

* MS body is not included with this product.

* Includes the set of weapon parts for reproducing Victory Two Assault Buster Gundam Ver.Ka. -?Additional weapons are reproduced as detachable parts.

-?Victory Two Assault Gundam and Victory Two Buster Gundam can be reproduced by parts reassembly.

* Updated Parts for the MS body included

- Includes updated parts of the newly structured internal frame and parts of exteriors to hold the heavy armaments.

* Reproduced in color moldings in accordance with the MS body available in retail stores.

- The gold parts are made in gold color moldings.

* Includes newly designed "Ver.Ka" markings for reproducing Victory Two Assault Buster Gundam.

-- Set details --

Assault Parts set / Buster Parts set / Updated Parts for main body / "Ver.Ka" Water decal

------------------------------------------------------------------------------------------------------------------

This product is a set of parts for reproducing "Victory Two Assault Buster Gundam" by attaching it?

to MG 1/100 Victory Two Gundam Ver. Ka" (sold separately; available in retail stores).

* MS body is not included with this product.

* To reproduce the suit in the photographs, a "MG 1/100 Victory Two Gundam Ver. Ka"(sold separately) before assembly,?along with this product, are required.

The very-popular Qubeley is now available in the Mk-II style, which is basically just a color variation from the original release. You also get that cool Neo Zeon mark on the shoulder. Molded in color, snap assembly. Poly-caps for the joints.Technology & Combat CharacteristicsIn terms of technology and performance the two Qubeley Mk-II units were virtually identical to the original Qubeley. The Qubeley Mk-II's stored an additional two remote funnel weapons in the tail binder over its predecessor, giving the mobile suit a total of twelve remote weapons. The one noticeable difference between the two identical Qubeley Mk-II's is the different color schemes. The first AMX-004-2 Qubeley Mk-II which featured a dark purple color scheme and a hilted beam saber. The second unit, AMX-004-3 Qubeley Mk-II, was largely identical to the first, but instead had a red-and-yellow paint scheme. Of course since the Qubeley Mk-II mobile suits were designed for Newtype pilots they were outfitted with the same miniaturized psycommu system of the first Qubeley so that the pilots may control the remote weapons with their Newtype abilities. One major differences between the two mobile suits psycommu systems, was that AMX-004-3 Qubeley Mk-II would have a new version of the psycommu system installed that would allow its pilot, through the use of a psycowave amplifying headset, to remote-control the mobile suit from outside the cockpit. The head parts of the Qubeley MK-II features a psywave sender/reciever, and also features a system that gives feedback to the pilot, a system never seen in other Newtype use MSs. The head is also crafted to act as a stabilizer in flight, thus the odd shape. The shoulder armor of the Qubely MK-II features 12 thrusters to give it exceptional mobility and speed. The binders also act as shields. They also help the Qubeley MK-II'S AMBAC system. The fingers of the MK-II also mount the same psywave sender/reciever system as the head, and can directly give the funnels instructions. The legs of the MK-II are used as landing gear and for walking. They feature thrusters as standard equipment that allow the MK-II to maneuver in space and in the atmosphere.Sources:wikipedia

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! This incredibly detailed and beautiful kit of Gundam F91 from the Mobile Suit Gundam F91 anime movie is stunningly reproduced in 1/100 scale Master Grade kit format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. Also included in this kit is the top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

105Dagger + Gunbarrel (HG) Item Size/Weight : 31 x 19.1 x 7.8 cm / 326g

Strum Dias (HGUC)HistoryThe Schuzrum Dias (also Sturm Dias) is a mobile suit from the anime series Mobile Suit Gundam ZZ. The Schuzrum Dias is a further improved model of the RMS-099 Rick Dias and MSA-099-2 Rick Dias II. It has a flared-out armor piece on the head for better protection of the sensors. The random binder propellant tank was upgraded into grye binder by mounting extra thrusters and verniers. This grye binder also mounts a mega beam gun similar to Rick Dias II's. Anaheim Electronics was forced to provide the Schuzrum Dias to Neo Zeon during the First Neo Zeon War.Source: wikipedia

- Custom aircraft appeared only source Genoa Wolf! - The white uniform of this mecha is a personal color. - Accessories: Beam spray gun, shield, heat stick stick heat beam (replacement for difference), Gun.

(BOX)Item Size/Weight : 31 x 20 x 13.4 cm / 615g

GN-009 Seraphim Gundam (HG) Carried on the back of Seravee Gundam, Seraphim Gundam is now offered as a snap-fit plastic kit! Molded in color, Seraphim Gundam will be fully poseable with polycap and ball-jointed articulation upon completion, and it's also transformable into a backpack to attach to the back of Bandai's HG Seravee Gundam kit (sold separately). When in backpack mode, its torso can be slid open into Face Burst mode. Two Beam Sabers and a sheet of foil stickers are included.

Gaia Gundam(HG) Sharp, high-grade snap-together kit of the Gaia Gundam is molded all in colour, so no glue or paint are required! The finished model will transform to Mobile Armour mode. Stickers are included for detail.

• - Added design marking stickers, Military aircraft identification marks and numbers. 
  
• - Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement.
  

• Added design marking stickers, Military aircraft identification marks and numbers.  
  
• Accessories that can dress up with a new seal marking. When used in combination, Can be your own original arrangement.
  

• Fully compatible with RG Aile Strike Gundam. 
• RG Strike Gundam can be changed into Launcher Strike with the Launcher Striker Pack. 
• RG Strike Gundam can be changed into Sword Strike with the Sword Striker Pack. 
• Launcher Grasper mode and Sword Grasper mode can be recreated. 
• runner x9, realistic decal x1, instruction manual x1 

• The first 5 [G] Hebiamuzu appearance! 
  
• Flexible movement on it's posture, with BIG ARM weapon - Accessories: Shield, beam gatling, army k-nife, concealed arms (saber charged)
  

[02] Zaku Worrier

MG 1/100 Nataku/ Altron Gundam from Super Nova (Blue Version)

Kindly note that this kit is a NON-BANDAI product.

Here's a superb set that not only pairs up the previously-released HG 00 Gundam with HG 0 Raiser, it also includes its most powerful weapon GN sword III with a clear pink beam effect part + CLEAR SKIN VERSION! Both kits come molded in clear skin color and 00 Gundam will be fully articulated with polycapped joints upon completion. Like its anime counterpart, 0 Raiser can dock with 00 Gundam to form 00 Raiser. Weapons include two GN sword IIs and one GN sword III that can switch to GN rifle II and GN rifle IIIs respectively, two GN beam sabers, and a shield. Foil stickers are included for detail. A black stand is also provided to assist with displaying the completed model in dynamic mid-air poses.