A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

• From the hilarious and utterly bizarre alternate-universe Gundam series G Gundam, comes the Neo Germany entry in the fray, Gundam Spiegel. 
  
• 2nd model from the G Gundam series! 
  
• Also included are unpainted 1/20 figures of Schwarz Bruder and Rain Mikamura. Simple instruction included in a box. 
• Weight:1000g
  

• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

EW-1 first models of OVA Wing series. Modified version of the Altron Gundam which appears in the new OVA "Gundam Wing: Endless Waltz." Includes unpainted 1/20 scale Wu-Fei Chan figure. "Dragon Fang" pincers on the arms extend several centimeters. Simple instruction included in a box. Weight: 1000g

Made up of 11 runners of injection plastic and one runner of polycaps, with two small sets of decals for detail, this is easily one of the most complex of the Gundam versions. Lots of poseability thanks to polycaps at the joints. It does not feature the inner-frame system. Weapons included Beam Gun, 2 Laser Swords, Shield and Giant Beam Sniper. Simple instruction included in a box. Weight: 1000g

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box. 
  
• Weight: 529g
  

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 

HG version of the Altron, the resurrected version of Shenlong. New coloring, and now both arms extend with the claw weapon. Back-mounted beam cannon, too. Everything moves. Snap-fit assembly. Colored plastic.History of Altron GundamWhen the XXXG-01S Shenlong Gundam was captured and destroyed by OZ's forces in AC 195, the extremely durable gundanium-made remains of that mobile suit were taken to OZ's lunar base and mobile suit factory for storage. The five scientists who had built the Gundams plaguing OZ were also at the lunar base, captured and forced to develop new mobile suit technology to secure OZ's rule over Earth and the space colonies. Despite their apparent "cooperation," however, the scientists also began rebuilding both the Shenlong and the XXXG-01D Gundam Deathscythe in secret, preparing for the day when captured Gundam pilots Chang Wufei and Duo Maxwell could return to the battlefield. That opportunity came when the Romefeller Foundation - the political force behind OZ - became split over a number of issues, and the "Treize Faction" of OZ attacked the lunar base, which at the time was still under the control of Romefeller loyalists. During the chaos Lady Une released both Duo and Wufei with their partially upgraded XXXG-01D2 Gundam Deathscythe Hell and XXXG-01S2 Altron Gundam. The improvements given to the Altron were dramatic. The old beam glaive was replaced with a double-ended twin beam trident, and both arms were outfitted with Shenlong's highly effective "dragon fang" extending arms and claws (hence the Altron name, taken from the Chinese "ertou long" or "two-headed dragon"). Along with increased mobility from it's "wing binders" on its back which enhances it's mobility in space, the Altron also mounted a pair of beam cannons on a "stinger tail," giving it effective ranged firepower for space combat (both the wings and tail stinger were removed in the OVA version) The new Altron was henceforth a menace to the White Fang army during the "Eve Wars". After AC 195, Wufei, wanting to see what the true meaning of justice is, took the Altron with him to the newly formed Marimeia Army instead of sending it into the Sun with the other Gundams. Wufei fought against Heero Yuy twice, once when the latter was piloting an outdated OZ-06MS Leo and the second time when Heero piloted a revived XXXG-00W0 Wing Gundam Zero. Wufei, seeing that true peace could not be achieved through Operation Meteor, rebelled against the Marimeia Army during the battle in Brussels. After the rebellion, the Altron was later self-detonated by Wufei Simple instruction included in a box. Weight: 1000g History Source: http://gundam.wikia.com

HG-grade kit of the new version of the Gundam Heavy Arms as it appears in the Gundam Wing: Endless Waltz OVA series. Includes two different versions of the face (one half-covered by a clown mask -- this will make sense to you if you've seen the show). Features two big double-barrel gattling-style guns that can be gripped in the hands or mounted on the backpack. A dozen places on this model open to reveal missiles ready to fire. Other details are typical of Bandai HG kits: Molded in color, snap-assembly, poly-caps and foil stickers for detail colors. Unpainted pilot figure, too. Simple instruction included in a box. Weight: 1000g

Wing series. Somewhat Chinese-style robot from Gundam Wing. Right arm unfolds to double-length.History of Shenlong GundamThe Gundam called Shenlong was design and constructed by Master O somewhere in the L5 colony cluster. As the Shenlong Gundam was nearing completion, Mei Lan Long (Wufei's fiance) had taken the name of "Nataku", stole a mobile suit, apparently the Tallgeese, when the colony was attacked. Nataku piloted the Tallgeese out into space with a beam cannon. The ensuing battle took its toll on Nataku and she later died in Wufei's arms. Her death caused Wufei to take up the job of piloting Shenlong against the United Earth Sphere Alliance and OZ. Throughout the series, Wufei affectionately called the Shenlong Gundam "Nataku" after his deceased wife. The Gundam's primary armament consisted of head mounted vulcans, a Japanese style "beam glaive", and a Chinese inspired extendable "Dragon Fang" integrated with the right arm. The fang itself is armed with "claws" for grappling an opponent and two flamethrowers on the sides of the dragon head. History source: http://gundam.wikia.com Simple instruction included in a box. Weight: 1000g

This model kit includes parts to build either Tall geese I, II, or III (some painting may be required due to color differences between forms). Mega Beam Cannon can open up to to reveal firing mode, while heat whip is articulated with individual segments. Two beam sabers are also included along with figure of Zechs.

The grim reaper Gundam from Gundam Wing in its characteristic navy blue and yellow color scheme. Includes two different scythe effect blades as well as smaller naginata like blade. Buster shield claws open and close and include energy blade. Extra effect parts included to simulate thrusters firing under shoulders, while scythe is coated with a metalic silver.

Force Impulse w/Sword Silhouette Extra-Finish Simple instruction included in a box. Weight : 593g

• The main machine, 00 QAN[T], decided for release before the release of the movie! 
  
• The Bit Gimmick completely reproduced: The tip of Bit Blade has been formed with clear green. With the bit able to split, the battle scene from the promotion video can be reproduced! 
  
• Includes the 00 QAN[T] custom GN Sword. The mode change has also been recreated. 
  
• Clear parts have been used for the eyes, head, ears, and lens parts. 
  
• The bits can be detached. The binder part is mobile. 
  
• The swing action mechanism has continually been used, for obtaining a wide range of poseable area. 
  
• The Bits blade tip has been made with AFX material, with safety in mind. - Accessories: Bit, GN Sword Item Size/Weight : 302g
  

- 1 / 144 the size amazing transformation! Gandam Harute! - Reproduce the form of the transformation gimmick detachable rifle. - MS-time form, reproducing moving back binder. - Detachable backpack. Each movement in the base. - Accessories: Rifles × 2, Backpack. Item Size/Weight : 31 x 19.1 x 7.8 cm / 387g

Gundam HGUC RGM-98S Stark Jegan Simple instruction included inside a package. Item Size/Weight : 362g

• Serving as both an infiltration and APC unit in the OVA "Gundam Unicorn", this versatile mobile suit can transform between MS and Tank mode and features realistic treads. Armaments can switch between mega machine cannon or long range guns.

• Gundam D-50C Loto Twin Set Simple instruction included in a box. Weight: 339g
  

• Color molded body is reproduced in Real Type Color! Seal comes with special markings!
  

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 

Taishiji Dom (SD) Simple instruction included in a box.

- Marvelous giant signature line with Kanu [Zhou Cang Dobenurufu] animated version. - Ax shoulder armor that comes with an attached transformed into a wide range of features. - Equipped with swords and axes in the back can also be merged to have, a spokesman for a huge transformation.

• Unicorn Gundam Destroy mode and Unicorn mode are both released at the same time! Unicorn Gundam Destroy mode is No.100 of HGUC 
  
• By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. 
  
• Psycho frame is formed with transparent material, for an emphasis on transformation. 
  
• Use of new type polycap allows increased posing range. 
  
• Has mobility that's as good as MG, even though it is HGUC 1/144! 
  
• Includes: Shield (Open state) x1, Beam Saber (no beam) x2, Beam Magnum x1
  

• The official side-story MS, Gundam Avalanche Exia Dash! 
  
• Avalanche Exia Dash, active in the [Gundam 00V War Record]! 
  
• Comes with a stand base to enable display during flight. 
  
• Able to recreate Gundam Avalanche Exia by selection. 
  
• The newly set booster has been equipped with the folding gimmick. Able to be displayed without a stand base. 
  
• The additional leg armory has mobile mechanism, enabling flexible poses. 
  
• Accessories: GN Sword, GN Short Blade, GN Long Blade, GN Beam Saber (off) x4,GN Beam Saber (on), Stand Base.
  

Introducing GUNDAM DYNAMES featured in GUNDAM 00 from 1/100 scale series. Various wrists and foil stickers included. Covering parts in the waist for stable-ness. Belts made with TPE. Chest lens and shoulder belts made with special material. New joint system installed. Double joint system in the shoulders. Accessories include of: Includes beam rifle, beam sabers, hand guns, and armor covers.

The Cherudim Gundam joins the lineup of 1/100 scale precision models of Mobile Suits from Gundam 00. Shoulders incorporate a swing mechanism for enhanced mobility forward, back, up, and down, allowing for dramatic "aim and shoot" poses. Forehead-mounted sensor covers open for sniper mode, and the "follow screen" is molded in translucent plastic. GN shield bits can be removed and placed on a stand to re-enact scenes from the show. Includes GN sniper rifle II, and two GN beam pistol II guns.

AMS-129 Gera Zulu Angelo Sauper Custom Simple instruction included in a box.History:From the Zeon Zaku II, to the Federation's Hizack, to the Geara Doga of Neo Zeon, and finally to the Neo Zeon remnants' (otherwise "Sleeves") Geara Zulu. Based off of a general concept that has been tried and true, the Geara Zulu is the latest and most humanoid of the progression. Although its raw specifications are overall better than its predecessor, the Geara Doga, the Geara Zulu has a notably smaller load out. This may be because the Sleeves may not have a complete and legitimate army. Although an efficient mobile suit, it is obviously outperformed by the ReZEL mobile suits due to both their mobility and firepower. Source: http://gundam.wikia.com

First introduced in the "Mobile Suit Gundam Seed Frame Astrays" manga that ran in the Dengeki Hobby magazine, Trojan Noiret's custom Gundam Astray Green Frame now receives the coveted 1/100-scale plastic kit treatment from Bandai! This much-anticipated snap-fit kit release comes sharply detailed and molded in its distinctive dark green and white colors. Its polycapped joints allow it to be set in various dynamic action poses. Weaponry includes its signature Twin Sword Rifle that can switch between sword type and rifle type, two Beam Sabers, and a shield. Also included in the set is an 8.5cm unpainted figure of Trojan molded in beige. A sheet of foil stickers and a sheet of Trojan Noiret custom marking stickers are provided.

Bandai 467300 HG Gundam Seed Destiny ZGMF-X23S SAVIOUR GUNDAM 1/100 Scale Kit

Item is a plastic model kit and assembly is required (this is a snap kit and glue is not required)

Our items are Bandai original items distributed in Japan and comes with Japanese instructions (illustrated diagram is included)