• Accessories: left and right arm for reproduction mortal, Silver Wing, Hand × 3 part set, Parts for two mortal neck cover, back cover × 2 set, for mortal effect parts, pedestal, Joint pedestal
  

The Solar Robot Kit can be used to help educate children about solar power. By constructing the 3 different models themselves, the child should feel more of a connection to the toy, which can allow them to take greater interest in the model when it moves in sunlight. Through watching any of these models once constructed they will witness an effective demonstration of how the power of the sun can be harnessed by the solar panel and converted into electrical energy. The models will also function under a deck light, if there is no sunlight to use. Once exposed to a light source each model will move itself across a flat surface. 

Product dimensions: 
Robot mode: 11.7 (H) x 8.2 (W) x 7.1 (D) cm / 4.6 (H) x 3.2 (W) x 2.8 inches 
Scorpion mode: 8.2 (H) x 9.4 (W) x 11.4 (D) / 3.2 (H) x 3.7 (W) x 4.5 (D) inches 
Tank mode: 7.8 (H) x 10 (W) x 5.4 (D) / 3 (H) x 3.9 (W) x 2.1 (D) inches 


The robot kit comprises of all the parts and mechanics needed to construct the 3 models, the 70 pieces can be rearranged to form the ‘standard’ robot, the tank or the scorpion. A screwdriver will be required during construction. Due to the detailed instructions supplied with the robot and the simplicity of constructing the models, the kit is suitable for ages 8 and up. 

The solar kit is both an interesting desk toy and a great educational toy for children. The robot is designed to be suitable as a first time science project to help teach children about alternative forms of energy, though some adult supervision is recommended. 

• Release Date: mid Mar 2014
• Accessories: Masked form for Armor × 2, Kabuto Kunai gun × 2 (※ body, Kunai portion separable Kunai cutter (Kunai blade), bayonet Axe (large) for ax blade), Kabutozekuta × 2 (Ryder Masked flight form), Sekt Minimizer, Possession gun-hand pose pointed, Retainer Nigi right hand × 5 (open hand, Sekt miser for hand), left hand × 2 Retainer Nigi (open hand ...), masked form for (Migijute-Hidarinigi Retainer), Rider kick effect parts, dedicated display-based
• This is pre-painted plastic model kits and require snap-fit assembly only.

- The challenge to the possibility of expressive power in the split parts of assuming the paint] and [included extensive parts] 
Appeared in Masked Rider 555 Plastic Model! I condense Innovation Gi-yu - the charm of Plastic!
Playing, decorate, I made, to be able to enjoy even paint more!
- Gimmick of Faiz phone is, increasing the width of posing!
- And be able to grasp the Faiz shot by pulling a grip! I can put it away in case!
- Faiz phone is open! And phone blaster!
- Two comes with and without the memory!
- Crimson Smash also reproduced in effect parts of the attachment!
- Pause is determined by Faiz edge!
- Painting, accelerator form also reproducible!

- Accessories: Faiz phone (deployable, mission with memory), Faiz phone (expandable,
No mission memory), phone Blaster (large: Prop size), Faiz shot (small),
(: Body separation and large case), Faiz Faiz pointer shot (short: no mission memory),
Faiz pointer (length: Mission memory), Faiz edge, right hand retainer Nigi x 4 (open hand ...
Retainer Nigi (open hand ...), shot for a hand, a hand Ju-yo), the left hand x 2 Crimson Smash effect for parts,
Dedicated display-based

• Latest One Piece released kit in series and first mecha series kit.
• Strongest union attracts Robo five! Chopper Robo appearance
• The series comes with 5 different robots to combine into one, and the coolest thing is you can match them up differently to create different robots, too
• Cute and amazing transformation kit with individual kit display or combining as one

1/48 AV-98 Ingram 'The Next Generation -Patlabor-'

Bandai's "Star Wars" lineup expands with the 1/12-scale Storm Trooper model kit! This standard-issue bucket head will come with multiple interchangeable hands, several weapons and a removable holster, as well as a display base. Fully posable after assembly, he'll be ready to whack his head into overhead doors, get beaten up by Ewoks, or escort Death Star prisoners to their doom as you choose! 

Bandai makes a big splash in the 'Star Wars' world with its 1/12-scale Darth Vader model kit!  This version of the Dark Lord of the Sith depicts him as seen in 'The Empire Strikes Back,' and includes interchangeable hands, a removable helmet, a light saber hilt and a ready-for-battle light saber.  His cape is also jointed for dramatic poses! A base is included as well.  Come over to the Dark Side and place your order today!

• This item is an injection-plastic figure kit.  

  This simple snap-fit kit is great for kids and beginners -- and it's cute, to boot! Togenyan is made up of parts molded in bright green, orange, and white plastic, and comes with plenty of stickers for different facial expressions and details!

• This item is an injection-plastic kit of a science-fiction/anime item.
  
• From "Star Wars Episode IV", Bandai presents us with an exquisitely detailed kit of the X-wing Starfighter in 1/72 scale! This kit includes parts for two pilots (one standing and one sitting) and posable versions of R2-D2 and R5-D4! Other accessories include proton torpedoes and a clear and clouded part for the canopy window. And last but not least, this set includes a Death Star Surface display base, as well as a Death Star Exhaust Port display piece so you can recreate the final, epic battle scene from the movie!Release Date: Nov 2014
  
• The kit in 72 scale X-wing starfighter Luke Skywalker was boarding in [episode 4].
  
• Accessories: landing gear to reproduce the landing and maintenance state is included.
  
• Astromech droid of the body 2 of the R2-D2, R5-D4 and (seated type upright type) pilot of the same scale comes with legs moving in an upright-walking time for both Droid.

Release Date: Nov 2014

To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

Full length: approx 85mm.

This is pre-painted plastic model kits and require snap-fit assembly only..

• The three-dimensional at 1/12 scale the typical protocol droid of Star Wars [C-3PO].
  
• Re-examine the wide range of materials in order to reproduce the fine detail, condensed in the 1/12 scale.
  
• Abdomen of cable will also use some soft material, reproduction.
  
• The base comes with those of the image of the floor of the internal Death Star. Also possible to be linked with other products of the pedestal of sale.
  
• Hand parts are included
  
• [C-3PO] characteristic reproduce gold of the body at the commitment plating specifications. Right foot is reproduced in silver-plated.

• At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
  
• Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
  
• The replacement of parts, to reproduce the opening and closing state of air brake.
  
• Snow Speeder can be reproduced to fire a laser gun with a laser effect.
  
• Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
  
• Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.
  

Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

[Star Wars] 1/12 Scout Trooper & Speeder Bike

• Accessories: scout trooper, speeder bike, dedicated display base × 2 (Endor image, Death Star image), scout trooper blaster, hand parts × 5 species (grip grip left and right × 2 / smack × 2 / weapon possession), rear parts × 2 of Repulsor drive (open / closed)
  

[Star Wars] 1/72 Y-Wing Starfighter

• Accessories: Death Star surface-based, laser effect parts, the same scale pilot figure x 3 (upright x 1, seated x 2 types), the same scale astromech droid x 2 species, canopy x 2 species (frame parts, clear parts ), Chakuyukaashi
  

[Star Wars] 1/12 Sand Trooper

• Accessories: only display base, backpack, shoulder pads, small pack x? 3, T-21 fire formula light blaster, E-11 blaster rifle, DLT-19 heavy blaster rifle, SE-14r short-range combat pistol, weapon possession x? 2, smack x? 2, left pointing hand, right hand grip
  

• Metal build power ranger legacy megazoids modelling kits.
• Go Go Power Rangers! Legacy Megazord is a blast from the Mighty Morphin Power Rangers past! 
• 5 Zords combine to create the mighty Megazord Dino Zord! This very limited release Megazord really transforms and features sections of die-cast metal and metallic paint effect.
  
• The five original Zords are included: Red Tyrannosaurs, Blue Triceratops, Yellow Sabertooth Tiger, Black Mastodon and Pink Pterodactyl. 
• These five will merge together to build Dino Megazord. The Power Sword and Mastodon Shield help the Power Rangers fight off evil alien monsters.
  
• Deluxe Megazord stands around 11 inches tall. Mighty Morphin Power Rangers Legacy Megazord is brand new in factory sealed box. Box features re-creation photos of the original Bandai Megazord box from 1993! 
• Legacy Megazord is the perfect Zord for any Power Ranger fan young or old.
  

• Accessories: (color version kanketsuhen Yamato) [Mekakore] Kosumozero × 1
  

• Accessories: pylon × 2, × 6 surface-to-air missiles, air-to-surface, anti-ship missile × 4, × 2 unit high mobility, Rudder, landing gear, a dedicated base, figure, figures cockpit
  

• Accessories: Meranka × 2, display stand, Meranka (Mekakore size)
  

• Accessories - Type: Saruba S-VI, dedicated pedestal
  

• Accessories: landing gear, the PVC (Saburo Kato) seating, The same scale figure (Saburo Kato) Standing, display stand, Air-to-ship missile × 6, air-to-air missile × 6